Re: Bugreport: Kernel 2.4.x crash
Hi! > > I have no experience with kernel debugging, but so far, I have found > > no log entry giving me a hint and the screen is blank after the crash > > Could you disable console blanking (setterm -blank 0). > > We really need a hint where it crashed. Over the easter weekend I took some time for testing. One ide channel does not work with dma enabled, which is bootup default. After about 30 seconds, the channel is switched to pio and the machine running again. Funny though: Before, I could not return from console blanking or reach the machine through network. But as for any production system, I rather keep it running than spend downtime seeking the error. Thank you all. Jörn -- Jörn Engel mailto: [EMAIL PROTECTED] http://wohnheim.fh-wedel.de/~joern - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Bugreport: Kernel 2.4.x crash
> 2. A Fileserver with an ABIT Hotrod 66 (htp366) controller will crash within > 5-60 minutes after boot with a 2.4.x kernel. 2.2.x works fine. No other no problem with ext2 on hpt366 here. > Gnu C 2.95.3 hmm. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: Bugreport: Kernel 2.4.x crash
On Tue, 3 Apr 2001, [iso-8859-1] Jörn Engel wrote: I don't necessarily believe its the hpt366, as you do. See below: (note: I've also had it running on a stock 2.4.2 kernel for a while) > 00:08.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 > (rev 01) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 6100 > Region 1: I/O ports at 6200 > Region 4: I/O ports at 6300 > > 00:08.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 > (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 6400 > Region 1: I/O ports at 6500 > Region 4: I/O ports at 6600 00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Bugreport: Kernel 2.4.x crash
1. Kernel crash w/out error message or logfile entry 2. A Fileserver with an ABIT Hotrod 66 (htp366) controller will crash within 5-60 minutes after boot with a 2.4.x kernel. 2.2.x works fine. No other exotic hardware. Another possibility might be Reiserfs, which I use for all partitions except /. I have no experience with kernel debugging, but so far, I have found no log entry giving me a hint and the screen is blank after the crash. There might have been some output before, but the machine is in the basement and too important for excessive testing. I have tried 2.4.2 and 2.4.3 once each. 3. ide, hpt366 4. 2.4.2, 2.4.3 5. - 6. - 7. All this information is taken from the running 2.2.18 Kernel. 7.1. sh /usr/src/linux/scripts/ver_linux -- Versions installed: (if some fields are empty or look -- unusual then possibly you have very old versions) Linux belfast 2.2.18 #1 Fri Feb 23 14:47:14 CET 2001 i586 unknown Kernel modules 2.4.2 Gnu C 2.95.3 Gnu Make 3.79.1 Binutils 2.11.90.0.1 Linux C Library2.2.2 Dynamic linker ldd (GNU libc) 2.2.2 Procps 2.0.7 Mount 2.11b Net-tools 2.05 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded sb uart401 sound soundcore 7.2. cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 5 model : 4 model name : Pentium MMX stepping: 3 cpu MHz : 200.459 fdiv_bug: no hlt_bug : no sep_bug : no f00f_bug: yes coma_bug: no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 mmx bogomips: 399.76 7.3 cat /var/log/ksymoops/20010401164317.modules (2.4.3) sb 2128 0 (unused) sb_lib 33936 0 [sb] uart401 6352 0 [sb_lib] sound 56400 0 [sb_lib uart401] soundcore 3792 5 [sb_lib sound] raid1 12784 0 (unused) raid0 3520 0 (unused) md 41056 0 [raid1 raid0] 7.4. cat /proc/ioports -001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 0220-022f : soundblaster 02f8-02ff : serial(set) 0330-0333 : MPU-401 UART 03c0-03df : vga+ 03e8-03ef : serial(auto) 03f6-03f6 : ide0 03f8-03ff : serial(set) 6100-6107 : ide2 6202-6202 : ide2 6400-6407 : ide3 6502-6502 : ide3 6700-677f : eth0 f000-f007 : ide0 f008-f00f : ide1 7.5 lspci -vvv 00:00.0 Host bridge: Intel Corporation 430HX - 82439HX TXC [Triton II] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
