First kernel bug report, sorry if I commit a faux pas. This occurs when I attempt to mount a disc in a Sony DRX-510UL drive connected by USB 2.0.
dbus and hal are running, ivman (automounter) is not running. Turn on the drive, if there is a disc in it remove it. Boot system. Login to KDE. Place a disc in the drive. Open a terminal. Type "mount /dev/sr0" (the drive already exists in fstab). The disc spins up and after a few seconds the system becomes unresponsive. Sometimes the cursor can be moved by the mouse, but it won't interact with the desktop. The only way to "unlock" the system is to push the reset or power button on the CPU. The following were all captured BEFORE the disc was mounted, not possible to capture afterwards. Linux version: Linux version 2.6.10-gentoo-r6L ([EMAIL PROTECTED]) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Fri Jan 21 22:10:36 EST 2005 ver_linux: Linux LNX-Glamdring 2.6.10-gentoo-r6L #1 SMP Fri Jan 21 22:10:36 EST 2005 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux Gnu C 3.3.4 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12p mount 2.12p module-init-tools 3.0 e2fsprogs 1.35 reiserfsprogs 3.6.18 reiser4progs line Linux C Library 2.3.4 Dynamic linker (ldd) 2.3.4 Procps 3.2.3 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded w83781d eeprom i2c_sensor i2c_isa sd_mod snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device 8139too snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd snd_page_alloc i2c_i801 i2c_core ehci_hcd usb_storage uhci_hcd intel_agp agpgart rtc usbcore sr_mod scsi_mod /proc/modules: w83781d 34344 0 - Live 0xe0ef9000 eeprom 6936 0 - Live 0xe0e86000 i2c_sensor 3968 2 w83781d,eeprom, Live 0xe0e84000 i2c_isa 2816 0 - Live 0xe086c000 sd_mod 14848 0 - Live 0xe0e91000 snd_pcm_oss 50212 0 - Live 0xe0eeb000 snd_mixer_oss 18944 1 snd_pcm_oss, Live 0xe0e8b000 snd_seq_oss 33408 0 - Live 0xe0ed1000 snd_seq_midi_event 7296 1 snd_seq_oss, Live 0xe0e81000 snd_seq 51984 4 snd_seq_oss,snd_seq_midi_event, Live 0xe0ec3000 snd_seq_device 7948 2 snd_seq_oss,snd_seq, Live 0xe0e7e000 8139too 22016 0 - Live 0xe0e6a000 snd_intel8x0 29600 0 - Live 0xe0e61000 snd_ac97_codec 74080 1 snd_intel8x0, Live 0xe0eaf000 snd_pcm 86788 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xe0e98000 snd_timer 22532 2 snd_seq,snd_pcm, Live 0xe0e29000 snd 47332 9 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xe0e71000 snd_page_alloc 8580 2 snd_intel8x0,snd_pcm, Live 0xe0826000 i2c_i801 8460 0 - Live 0xe083a000 i2c_core 19456 5 w83781d,eeprom,i2c_sensor,i2c_isa,i2c_i801, Live 0xe0e30000 ehci_hcd 28932 0 - Live 0xe0877000 usb_storage 29184 0 - Live 0xe0863000 uhci_hcd 31504 0 - Live 0xe086e000 intel_agp 20508 1 - Live 0xe085c000 agpgart 29484 1 intel_agp, Live 0xe0853000 rtc 11208 0 - Live 0xe0831000 usbcore 105720 4 ehci_hcd,usb_storage,uhci_hcd, Live 0xe0e0e000 sr_mod 16164 0 - Live 0xe082c000 scsi_mod 75488 3 sd_mod,usb_storage,sr_mod, Live 0xe083f000 /proc/ioports: 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0290-0297 : w83781d 0376-0376 : ide1 03c0-03df : vga+ 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0400-047f : 0000:00:1f.0 0400-0403 : PM1a_EVT_BLK 0404-0405 : PM1a_CNT_BLK 0408-040b : PM_TMR 0428-042f : GPE0_BLK 0480-04bf : 0000:00:1f.0 0500-051f : 0000:00:1f.3 0500-050f : i801-smbus 0cf8-0cff : PCI conf1 9000-9fff : PCI Bus #01 9000-90ff : 0000:01:00.0 a000-a0ff : 0000:02:02.0 a000-a0ff : 8139too b000-b01f : 0000:00:1d.1 b000-b01f : uhci_hcd b400-b41f : 0000:00:1d.2 b400-b41f : uhci_hcd b800-b81f : 0000:00:1d.3 b800-b81f : uhci_hcd bc00-bc1f : 0000:00:1d.0 bc00-bc1f : uhci_hcd c000-c007 : 0000:00:1f.2 c400-c403 : 0000:00:1f.2 c800-c807 : 0000:00:1f.2 cc00-cc03 : 0000:00:1f.2 d000-d00f : 0000:00:1f.2 d800-d8ff : 0000:00:1f.5 d800-d8ff : Intel ICH5 dc00-dc3f : 0000:00:1f.5 dc00-dc3f : Intel ICH5 f000-f00f : 0000:00:1f.1 f000-f007 : ide0 f008-f00f : ide1 lspci -vvv: 0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP- GART64- 64bit- FW- Rate=<none> 0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00009000-00009fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: d0000000-efffffff Expansion ROM at 00009000 [disabled] [size=4K] BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bc00 [size=32] 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b000 [size=32] 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b400 [size=32] 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b800 [size=32] 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fc000000 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at f000 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c000 Region 1: I/O ports at c400 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at d000 [size=16] 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0500 [size=32] 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) Subsystem: ABIT Computer Corp.: Unknown device 100a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at d800 Region 1: I/O ports at dc00 [size=64] Region 2: Memory at fc001000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at fc002000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA]) Subsystem: C.P. Technology Co. Ltd: Unknown device 2064 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0000000 (32-bit, prefetchable) Region 1: I/O ports at 9000 [size=256] Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) Subsystem: C.P. Technology Co. Ltd: Unknown device 2065 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at e0000000 (32-bit, prefetchable) [disabled] Region 1: Memory at f9010000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: ABIT Computer Corp.: Unknown device 1016 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at a000 Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- fstab: # This file is edited by fstab-sync - see 'man fstab-sync' for details # /etc/fstab: static file system information. # $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $ # # noatime turns off atimes for increased performance (atimes normally aren't # needed; notail increases performance of ReiserFS (at the expense of storage # efficiency). It's safe to drop the noatime options if you want and to # switch between notail and tail freely. # <fs> <mountpoint> <type> <opts> <dump/pass> # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. /dev/hda8 /boot ext3 noauto,noatime 1 1 /dev/hda10 / reiserfs noatime,notail 0 1 /dev/hda9 none swap sw 0 0 /dev/hda6 /mnt/win_e vfat user,noatime,uid=rich 0 2 # NOTE: The next line is critical for boot! none /proc proc defaults 0 0 # glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for # POSIX shared memory (shm_open, shm_unlink). # (tmpfs is a dynamically expandable/shrinkable ramdisk, and will # use almost no memory if not populated with files) # Adding the following line to /etc/fstab should take care of this: /dev/hdc /media/cdrw auto exec,user,noauto,managed 0 0 /dev/sr0 /media/dvdr auto exec,user,noauto,managed 0 0 This also occurs with the 2.6.9 kernel (that's the oldest one I still have). That's it! Rich - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/