Problem on SCTP
Hi I am setting up a lab where the SCTP traffics from client is passing through a linux router before reaching to the SCTP server running LKSCTP. The linux router did not change the source address of the client, so when it arrived to the SCTP server, the source address is the oriingal one. however, I found that there is no response from the SCTP server, any idea on this? if I connect the client directly to the SCTP server, it do not have any issue. help pls rbk
Re: Problem on SCTP
Hi, On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote: > Hi > > I am setting up a lab where the SCTP traffics from client is passing > through a linux router before reaching to the SCTP server running > LKSCTP. > > The linux router did not change the source address of the client, so > when it arrived to the SCTP server, the source address is the oriingal > one. > > however, I found that there is no response from the SCTP server, any > idea on this? > > if I connect the client directly to the SCTP server, it do not have any issue. This seems to be a routing issue then, specially if you're using rp_filter. Make sure the server can reach that foreign address the client uses. Marcelo > > help pls > > rbk > -- > To unsubscribe from this list: send the line "unsubscribe linux-sctp" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
Re: Problem on SCTP
On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote: > Hi > > I am setting up a lab where the SCTP traffics from client is passing > through a linux router before reaching to the SCTP server running > LKSCTP. > > The linux router did not change the source address of the client, so > when it arrived to the SCTP server, the source address is the oriingal > one. > > however, I found that there is no response from the SCTP server, any > idea on this? > > if I connect the client directly to the SCTP server, it do not have any issue. > > help pls > > rbk > -- > To unsubscribe from this list: send the line "unsubscribe linux-sctp" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Start with a tcpdump on the client and the server and attempt a connection, check to see if the INIT and INIT-ACK chunks are arriving appropriately. Neil
Re: Problem on SCTP
Hi Xin I have used 3.10.0-514.6.2.el7.x86_64 on Centos7 and tessted. the same issue still occur. any idea? On Mon, Feb 27, 2017 at 11:06 PM, Xin Long wrote: > On Mon, Feb 27, 2017 at 5:01 PM, Sun Paul wrote: >> Hi, can I confirm that the problem is on the Linux router itself or on >> both server and client? >> > try with a new kernel in router, like build and install a upstream > kernel on your route machine. > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git > > https://kernelnewbies.org/KernelBuild : > part "Setting up your kernel configuration" and > part "Building the kernel" > >> On Thu, Feb 23, 2017 at 2:07 PM, Xin Long wrote: >>> On Thu, Feb 23, 2017 at 1:30 PM, Sun Paul wrote: does this fixed in RHEL7? >>> yes, I think so. >>> On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: > On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: >> Hi Xin >> >> do you mean we need to patch the kernel? > Yups, pls comment on that bz if it's really needed for your env. > A z-stream kernel may be available for that issue soon. > > Thanks. > >> >> >> >> On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: >>> On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: Hi the router is actually is a linux running on RHEL6.8 (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT forward. >>> https://bugzilla.redhat.com/show_bug.cgi?id=1412038 >>> >>> sctp_manip_pkt->sctp_compute_cksum: >>> struct sctphdr *sh = sctp_hdr(sub); >>> >>> But in rhel6, skb->transport_header is not yet set at that time. >>> This patch should be backported into rhel6. >>> >>> commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 >>> Author: Eric Dumazet >>> Date: Mon Jul 15 20:03:19 2013 -0700 >>> >>> ipv4: set transport header earlier >>> >>> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: > On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >> Hi, >> >> sorry to get back late, the platform is running on KVM. and this >> problem is resolved by moving to VMware environment, however, a new >> problem is coming out, we noticed that the HB REQ is being ABORT from >> client. >> >> >> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from server to sctp router) >> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from sctp router to client) >> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >> [ABORT] (from client to sctp router) >> >> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] >> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] >> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >> [ABORT] >> >> For the above packet flow, 10.165.250.22 is the server and >> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >> SCTP router change the src address before forward the HB REQ to the >> client. >> >> But somehow the client is ABORT the HB REQ, any idea? is it related >> to >> the HEARTBEAT information? or the checksum again>? > The incorrect checksum won't cause ABORT, but the abnormal HB REQ > could be, if HB information was modified when calculating the checksum > on router, the ABORT may be caused in client process. > > is your SCTP router linux ? if yes, what's the kernel version ? > >> >> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >> wrote: On 13 Jan 2017, at 10:43, Michael Tuexen wrote: Your router does NOT change any field in the SCTP packet, but the SCTP checksum was modified from Checksum: 0xbaea49e5 (not verified) to Checksum: 0xa9a86d3f (not verified) At least one of these is wrong. Read the tracefiles in wireshark and enable checksum validation and wireshark will tell you which one is correct. (That is why I asked for .pcap file instead of a .txt). My guess is that the initial checksum is correct and your box middlebox not only changes the destination address and ttl field and header checksum in the IP-header (which is expected) but also incorrectly the SCTP checksum. Since no field in the SCTP packet has changed, the checksum must be the same. >>>
Re: Problem on SCTP
On Wed, Mar 1, 2017 at 12:15 PM, Sun Paul wrote: > Hi Xin > > I have used 3.10.0-514.6.2.el7.x86_64 on Centos7 and tessted. the > same issue still occur. > > any idea? > what I can only see is : 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] this ABORT might be caused by no assoc. can you show more details about your env ? 1. the iptables rule for nat in router (# iptables -L -t nat) 2. the asocs info in client (# cat /proc/net/sctp/assocs) 3. more packet you captured, like 4-shake and some packets right before these 3 packets. 4. conntrack info in router (# cat /proc/net/nf_conntrack) > On Mon, Feb 27, 2017 at 11:06 PM, Xin Long wrote: >> On Mon, Feb 27, 2017 at 5:01 PM, Sun Paul wrote: >>> Hi, can I confirm that the problem is on the Linux router itself or on >>> both server and client? >>> >> try with a new kernel in router, like build and install a upstream >> kernel on your route machine. >> >> git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git >> >> https://kernelnewbies.org/KernelBuild : >> part "Setting up your kernel configuration" and >> part "Building the kernel" >> >>> On Thu, Feb 23, 2017 at 2:07 PM, Xin Long wrote: On Thu, Feb 23, 2017 at 1:30 PM, Sun Paul wrote: > does this fixed in RHEL7? yes, I think so. > > On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: >> On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: >>> Hi Xin >>> >>> do you mean we need to patch the kernel? >> Yups, pls comment on that bz if it's really needed for your env. >> A z-stream kernel may be available for that issue soon. >> >> Thanks. >> >>> >>> >>> >>> On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: > Hi > > the router is actually is a linux running on RHEL6.8 > (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT > forward. https://bugzilla.redhat.com/show_bug.cgi?id=1412038 sctp_manip_pkt->sctp_compute_cksum: struct sctphdr *sh = sctp_hdr(sub); But in rhel6, skb->transport_header is not yet set at that time. This patch should be backported into rhel6. commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 Author: Eric Dumazet Date: Mon Jul 15 20:03:19 2013 -0700 ipv4: set transport header earlier > > On Tue, Feb 21, 2017 at 11:53 PM, Xin Long > wrote: >> On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >>> Hi, >>> >>> sorry to get back late, the platform is running on KVM. and this >>> problem is resolved by moving to VMware environment, however, a new >>> problem is coming out, we noticed that the HB REQ is being ABORT >>> from >>> client. >>> >>> >>> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from server to sctp router) >>> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from sctp router to client) >>> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >>> [ABORT] (from client to sctp router) >>> >>> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp >>> (1) [HB REQ] >>> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] >>> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >>> [ABORT] >>> >>> For the above packet flow, 10.165.250.22 is the server and >>> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >>> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >>> SCTP router change the src address before forward the HB REQ to the >>> client. >>> >>> But somehow the client is ABORT the HB REQ, any idea? is it related >>> to >>> the HEARTBEAT information? or the checksum again>? >> The incorrect checksum won't cause ABORT, but the abnormal HB REQ >> could be, if HB information was modified when calculating the >> checksum >> on router, the ABORT may be caused in client process. >> >> is your SCTP router linux ? if yes, what's the kernel version ? >> >>> >>> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >>> wrote: > On 13 Jan 2017, at 10:43, Michael Tuexen > wrote: > > Your router does NOT change any field in the SCTP packet, but the > SCTP checksum was modifie
Re: Problem on SCTP
Hi, sorry to get back late, the platform is running on KVM. and this problem is resolved by moving to VMware environment, however, a new problem is coming out, we noticed that the HB REQ is being ABORT from client. 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from server to sctp router) 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from sctp router to client) 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] (from client to sctp router) 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] For the above packet flow, 10.165.250.22 is the server and 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the SCTP router change the src address before forward the HB REQ to the client. But somehow the client is ABORT the HB REQ, any idea? is it related to the HEARTBEAT information? or the checksum again>? On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen wrote: >> On 13 Jan 2017, at 10:43, Michael Tuexen >> wrote: >> >> Your router does NOT change any field in the SCTP packet, but the >> SCTP checksum was modified from >> Checksum: 0xbaea49e5 (not verified) >> to >> Checksum: 0xa9a86d3f (not verified) >> At least one of these is wrong. Read the tracefiles in wireshark and >> enable checksum validation and wireshark will tell you which one is >> correct. (That is why I asked for .pcap file instead of a .txt). >> >> My guess is that the initial checksum is correct and your box middlebox >> not only changes the destination address and ttl field and header >> checksum in the IP-header (which is expected) but also incorrectly the >> SCTP checksum. Since no field in the SCTP packet has changed, the checksum >> must be the same. > At the server have a look at the SNMP counters: > cat /proc/net/sctp/snmp > You should find a line staring with > SctpChecksumErrors > If the number reported there is positive, the node received packets > with checksum errors. > > Best regards > Michael >> >> Best regards >> Michael >>> On 13 Jan 2017, at 04:29, Sun Paul wrote: >>> >>> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >>> Encapsulation type: Ethernet (1) >>> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard >>> Time >>> [Time shift for this packet: 0.0 seconds] >>> Epoch Time: 1483692769.662321000 seconds >>> [Time delta from previous captured frame: 0.000179000 seconds] >>> [Time delta from previous displayed frame: 0.000179000 seconds] >>> [Time since reference or first frame: 0.000179000 seconds] >>> Frame Number: 2 >>> Frame Length: 98 bytes (784 bits) >>> Capture Length: 98 bytes (784 bits) >>> [Frame is marked: False] >>> [Frame is ignored: False] >>> [Protocols in frame: eth:ethertype:ip:sctp] >>> Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: >>> Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> ..0. = LG bit: Globally unique >>> address (factory default) >>> ...0 = IG bit: Individual address (unicast) >>> Source: Vmware_81:41:6b (00:50:56:81:41:6b) >>> Address: Vmware_81:41:6b (00:50:56:81:41:6b) >>> ..0. = LG bit: Globally unique >>> address (factory default) >>> ...0 = IG bit: Individual address (unicast) >>> Type: IPv4 (0x0800) >>> Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 >>> 0100 = Version: 4 >>> 0101 = Header Length: 20 bytes (5) >>> Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) >>> 00.. = Differentiated Services Codepoint: Default (0) >>> ..10 = Explicit Congestion Notification: ECN-Capable >>> Transport codepoint '10' (2) >>> Total Length: 84 >>> Identification: 0x (0) >>> Flags: 0x02 (Don't Fragment) >>> 0... = Reserved bit: Not set >>> .1.. = Don't fragment: Set >>> ..0. = More fragments: Not set >>> Fragment offset: 0 >>> Time to live: 63 >>> Protocol: SCTP (132) >>> Header checksum: 0x1d3d [validation disabled] >>> [Good: False] >>> [Bad: False] >>> Source: 192.168.206.83 >>> Destination: 192.168.206.66 >>> [Source GeoIP: Unknown] >>> [Destination GeoIP: Unknown] >>> Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst >>> Port: 3868 (3868) >>> Source port: 50001 >>> Destination port: 3868 >>> Verification tag: 0x >>> [Assocation index: 0] >>> Checksum: 0xa9a86d3f (not verified) >>> >>> INIT chunk (Outbound streams: 3000, inbound streams: 3000) >>>
Re: Problem on SCTP
On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: > Hi, > > sorry to get back late, the platform is running on KVM. and this > problem is resolved by moving to VMware environment, however, a new > problem is coming out, we noticed that the HB REQ is being ABORT from > client. > > > 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from server to sctp router) > 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from sctp router to client) > 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) > [ABORT] (from client to sctp router) > > 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] > 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] > 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] > > For the above packet flow, 10.165.250.22 is the server and > 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to > client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the > SCTP router change the src address before forward the HB REQ to the > client. > > But somehow the client is ABORT the HB REQ, any idea? is it related to > the HEARTBEAT information? or the checksum again>? The incorrect checksum won't cause ABORT, but the abnormal HB REQ could be, if HB information was modified when calculating the checksum on router, the ABORT may be caused in client process. is your SCTP router linux ? if yes, what's the kernel version ? > > On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen > wrote: >>> On 13 Jan 2017, at 10:43, Michael Tuexen >>> wrote: >>> >>> Your router does NOT change any field in the SCTP packet, but the >>> SCTP checksum was modified from >>> Checksum: 0xbaea49e5 (not verified) >>> to >>> Checksum: 0xa9a86d3f (not verified) >>> At least one of these is wrong. Read the tracefiles in wireshark and >>> enable checksum validation and wireshark will tell you which one is >>> correct. (That is why I asked for .pcap file instead of a .txt). >>> >>> My guess is that the initial checksum is correct and your box middlebox >>> not only changes the destination address and ttl field and header >>> checksum in the IP-header (which is expected) but also incorrectly the >>> SCTP checksum. Since no field in the SCTP packet has changed, the checksum >>> must be the same. >> At the server have a look at the SNMP counters: >> cat /proc/net/sctp/snmp >> You should find a line staring with >> SctpChecksumErrors >> If the number reported there is positive, the node received packets >> with checksum errors. >> >> Best regards >> Michael >>> >>> Best regards >>> Michael On 13 Jan 2017, at 04:29, Sun Paul wrote: Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662321000 seconds [Time delta from previous captured frame: 0.000179000 seconds] [Time delta from previous displayed frame: 0.000179000 seconds] [Time since reference or first frame: 0.000179000 seconds] Frame Number: 2 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 63 Protocol: SCTP (132) Header checksum: 0x1d3d [validation disabled] [Good: False] [Bad: False] Source: 192.1
Re: Problem on SCTP
Hi the router is actually is a linux running on RHEL6.8 (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT forward. On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: > On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >> Hi, >> >> sorry to get back late, the platform is running on KVM. and this >> problem is resolved by moving to VMware environment, however, a new >> problem is coming out, we noticed that the HB REQ is being ABORT from >> client. >> >> >> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from server to sctp router) >> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from sctp router to client) >> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >> [ABORT] (from client to sctp router) >> >> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] >> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] >> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] >> >> For the above packet flow, 10.165.250.22 is the server and >> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >> SCTP router change the src address before forward the HB REQ to the >> client. >> >> But somehow the client is ABORT the HB REQ, any idea? is it related to >> the HEARTBEAT information? or the checksum again>? > The incorrect checksum won't cause ABORT, but the abnormal HB REQ > could be, if HB information was modified when calculating the checksum > on router, the ABORT may be caused in client process. > > is your SCTP router linux ? if yes, what's the kernel version ? > >> >> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >> wrote: On 13 Jan 2017, at 10:43, Michael Tuexen wrote: Your router does NOT change any field in the SCTP packet, but the SCTP checksum was modified from Checksum: 0xbaea49e5 (not verified) to Checksum: 0xa9a86d3f (not verified) At least one of these is wrong. Read the tracefiles in wireshark and enable checksum validation and wireshark will tell you which one is correct. (That is why I asked for .pcap file instead of a .txt). My guess is that the initial checksum is correct and your box middlebox not only changes the destination address and ttl field and header checksum in the IP-header (which is expected) but also incorrectly the SCTP checksum. Since no field in the SCTP packet has changed, the checksum must be the same. >>> At the server have a look at the SNMP counters: >>> cat /proc/net/sctp/snmp >>> You should find a line staring with >>> SctpChecksumErrors >>> If the number reported there is positive, the node received packets >>> with checksum errors. >>> >>> Best regards >>> Michael Best regards Michael > On 13 Jan 2017, at 04:29, Sun Paul wrote: > > Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) > Encapsulation type: Ethernet (1) > Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard > Time > [Time shift for this packet: 0.0 seconds] > Epoch Time: 1483692769.662321000 seconds > [Time delta from previous captured frame: 0.000179000 seconds] > [Time delta from previous displayed frame: 0.000179000 seconds] > [Time since reference or first frame: 0.000179000 seconds] > Frame Number: 2 > Frame Length: 98 bytes (784 bits) > Capture Length: 98 bytes (784 bits) > [Frame is marked: False] > [Frame is ignored: False] > [Protocols in frame: eth:ethertype:ip:sctp] > Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: > Vmware_81:a6:a3 (00:50:56:81:a6:a3) > Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) > Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) > Source: Vmware_81:41:6b (00:50:56:81:41:6b) > Address: Vmware_81:41:6b (00:50:56:81:41:6b) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) > Type: IPv4 (0x0800) > Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 > 0100 = Version: 4 > 0101 = Header Length: 20 bytes (5) > Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) > 00.. = Differentiated Services Codepoint: Default (0) > ..10 = Explicit Congestion Notification: ECN-Capable > Transport codepoint '10' (2) > Total Length: 84 > Identification: 0x (0) > Flags: 0x02 (Don't Fragment) > 0... = Reserved bit: N
Re: Problem on SCTP
On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: > Hi > > the router is actually is a linux running on RHEL6.8 > (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT > forward. https://bugzilla.redhat.com/show_bug.cgi?id=1412038 sctp_manip_pkt->sctp_compute_cksum: struct sctphdr *sh = sctp_hdr(sub); But in rhel6, skb->transport_header is not yet set at that time. This patch should be backported into rhel6. commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 Author: Eric Dumazet Date: Mon Jul 15 20:03:19 2013 -0700 ipv4: set transport header earlier > > On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: >> On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >>> Hi, >>> >>> sorry to get back late, the platform is running on KVM. and this >>> problem is resolved by moving to VMware environment, however, a new >>> problem is coming out, we noticed that the HB REQ is being ABORT from >>> client. >>> >>> >>> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from server to sctp router) >>> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from sctp router to client) >>> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >>> [ABORT] (from client to sctp router) >>> >>> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB >>> REQ] >>> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] >>> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] >>> >>> For the above packet flow, 10.165.250.22 is the server and >>> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >>> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >>> SCTP router change the src address before forward the HB REQ to the >>> client. >>> >>> But somehow the client is ABORT the HB REQ, any idea? is it related to >>> the HEARTBEAT information? or the checksum again>? >> The incorrect checksum won't cause ABORT, but the abnormal HB REQ >> could be, if HB information was modified when calculating the checksum >> on router, the ABORT may be caused in client process. >> >> is your SCTP router linux ? if yes, what's the kernel version ? >> >>> >>> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >>> wrote: > On 13 Jan 2017, at 10:43, Michael Tuexen > wrote: > > Your router does NOT change any field in the SCTP packet, but the > SCTP checksum was modified from > Checksum: 0xbaea49e5 (not verified) > to > Checksum: 0xa9a86d3f (not verified) > At least one of these is wrong. Read the tracefiles in wireshark and > enable checksum validation and wireshark will tell you which one is > correct. (That is why I asked for .pcap file instead of a .txt). > > My guess is that the initial checksum is correct and your box middlebox > not only changes the destination address and ttl field and header > checksum in the IP-header (which is expected) but also incorrectly the > SCTP checksum. Since no field in the SCTP packet has changed, the checksum > must be the same. At the server have a look at the SNMP counters: cat /proc/net/sctp/snmp You should find a line staring with SctpChecksumErrors If the number reported there is positive, the node received packets with checksum errors. Best regards Michael > > Best regards > Michael >> On 13 Jan 2017, at 04:29, Sun Paul wrote: >> >> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >> Encapsulation type: Ethernet (1) >> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard >> Time >> [Time shift for this packet: 0.0 seconds] >> Epoch Time: 1483692769.662321000 seconds >> [Time delta from previous captured frame: 0.000179000 seconds] >> [Time delta from previous displayed frame: 0.000179000 seconds] >> [Time since reference or first frame: 0.000179000 seconds] >> Frame Number: 2 >> Frame Length: 98 bytes (784 bits) >> Capture Length: 98 bytes (784 bits) >> [Frame is marked: False] >> [Frame is ignored: False] >> [Protocols in frame: eth:ethertype:ip:sctp] >> Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: >> Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> ..0. = LG bit: Globally unique >> address (factory default) >> ...0 = IG bit: Individual address >> (unicast) >> Source: Vmware_81:41:6b (00:50:56:81:41:6b) >> Address: Vmware_81:41:6b (00:50:56:81:41:6b) >> ..0. = LG bit: Globally unique >> address (factory default) >> ...0 = IG bit: Individual address >> (unic
Re: Problem on SCTP
Hi Xin do you mean we need to patch the kernel? On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: > On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: >> Hi >> >> the router is actually is a linux running on RHEL6.8 >> (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT >> forward. > https://bugzilla.redhat.com/show_bug.cgi?id=1412038 > > sctp_manip_pkt->sctp_compute_cksum: > struct sctphdr *sh = sctp_hdr(sub); > > But in rhel6, skb->transport_header is not yet set at that time. > This patch should be backported into rhel6. > > commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 > Author: Eric Dumazet > Date: Mon Jul 15 20:03:19 2013 -0700 > > ipv4: set transport header earlier > > >> >> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: >>> On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: Hi, sorry to get back late, the platform is running on KVM. and this problem is resolved by moving to VMware environment, however, a new problem is coming out, we noticed that the HB REQ is being ABORT from client. 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from server to sctp router) 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from sctp router to client) 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] (from client to sctp router) 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] For the above packet flow, 10.165.250.22 is the server and 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the SCTP router change the src address before forward the HB REQ to the client. But somehow the client is ABORT the HB REQ, any idea? is it related to the HEARTBEAT information? or the checksum again>? >>> The incorrect checksum won't cause ABORT, but the abnormal HB REQ >>> could be, if HB information was modified when calculating the checksum >>> on router, the ABORT may be caused in client process. >>> >>> is your SCTP router linux ? if yes, what's the kernel version ? >>> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen wrote: >> On 13 Jan 2017, at 10:43, Michael Tuexen >> wrote: >> >> Your router does NOT change any field in the SCTP packet, but the >> SCTP checksum was modified from >> Checksum: 0xbaea49e5 (not verified) >> to >> Checksum: 0xa9a86d3f (not verified) >> At least one of these is wrong. Read the tracefiles in wireshark and >> enable checksum validation and wireshark will tell you which one is >> correct. (That is why I asked for .pcap file instead of a .txt). >> >> My guess is that the initial checksum is correct and your box middlebox >> not only changes the destination address and ttl field and header >> checksum in the IP-header (which is expected) but also incorrectly the >> SCTP checksum. Since no field in the SCTP packet has changed, the >> checksum >> must be the same. > At the server have a look at the SNMP counters: > cat /proc/net/sctp/snmp > You should find a line staring with > SctpChecksumErrors > If the number reported there is positive, the node received packets > with checksum errors. > > Best regards > Michael >> >> Best regards >> Michael >>> On 13 Jan 2017, at 04:29, Sun Paul wrote: >>> >>> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >>> Encapsulation type: Ethernet (1) >>> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula >>> Standard Time >>> [Time shift for this packet: 0.0 seconds] >>> Epoch Time: 1483692769.662321000 seconds >>> [Time delta from previous captured frame: 0.000179000 seconds] >>> [Time delta from previous displayed frame: 0.000179000 seconds] >>> [Time since reference or first frame: 0.000179000 seconds] >>> Frame Number: 2 >>> Frame Length: 98 bytes (784 bits) >>> Capture Length: 98 bytes (784 bits) >>> [Frame is marked: False] >>> [Frame is ignored: False] >>> [Protocols in frame: eth:ethertype:ip:sctp] >>> Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: >>> Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >>> ..0. = LG bit: Globally unique >>> address (factory default) >>> ...0 = IG bit: Individual address >>> (unicast) >>> Source: Vmware_81:41:6b (00:50:56:81:41:6b) >>
Re: Problem on SCTP
On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: > Hi Xin > > do you mean we need to patch the kernel? Yups, pls comment on that bz if it's really needed for your env. A z-stream kernel may be available for that issue soon. Thanks. > > > > On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: >> On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: >>> Hi >>> >>> the router is actually is a linux running on RHEL6.8 >>> (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT >>> forward. >> https://bugzilla.redhat.com/show_bug.cgi?id=1412038 >> >> sctp_manip_pkt->sctp_compute_cksum: >> struct sctphdr *sh = sctp_hdr(sub); >> >> But in rhel6, skb->transport_header is not yet set at that time. >> This patch should be backported into rhel6. >> >> commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 >> Author: Eric Dumazet >> Date: Mon Jul 15 20:03:19 2013 -0700 >> >> ipv4: set transport header earlier >> >> >>> >>> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: > Hi, > > sorry to get back late, the platform is running on KVM. and this > problem is resolved by moving to VMware environment, however, a new > problem is coming out, we noticed that the HB REQ is being ABORT from > client. > > > 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from server to sctp router) > 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from sctp router to client) > 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) > [ABORT] (from client to sctp router) > > 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB > REQ] > 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB > REQ] > 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) > [ABORT] > > For the above packet flow, 10.165.250.22 is the server and > 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to > client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the > SCTP router change the src address before forward the HB REQ to the > client. > > But somehow the client is ABORT the HB REQ, any idea? is it related to > the HEARTBEAT information? or the checksum again>? The incorrect checksum won't cause ABORT, but the abnormal HB REQ could be, if HB information was modified when calculating the checksum on router, the ABORT may be caused in client process. is your SCTP router linux ? if yes, what's the kernel version ? > > On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen > wrote: >>> On 13 Jan 2017, at 10:43, Michael Tuexen >>> wrote: >>> >>> Your router does NOT change any field in the SCTP packet, but the >>> SCTP checksum was modified from >>> Checksum: 0xbaea49e5 (not verified) >>> to >>> Checksum: 0xa9a86d3f (not verified) >>> At least one of these is wrong. Read the tracefiles in wireshark and >>> enable checksum validation and wireshark will tell you which one is >>> correct. (That is why I asked for .pcap file instead of a .txt). >>> >>> My guess is that the initial checksum is correct and your box middlebox >>> not only changes the destination address and ttl field and header >>> checksum in the IP-header (which is expected) but also incorrectly the >>> SCTP checksum. Since no field in the SCTP packet has changed, the >>> checksum >>> must be the same. >> At the server have a look at the SNMP counters: >> cat /proc/net/sctp/snmp >> You should find a line staring with >> SctpChecksumErrors >> If the number reported there is positive, the node received packets >> with checksum errors. >> >> Best regards >> Michael >>> >>> Best regards >>> Michael On 13 Jan 2017, at 04:29, Sun Paul wrote: Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662321000 seconds [Time delta from previous captured frame: 0.000179000 seconds] [Time delta from previous displayed frame: 0.000179000 seconds] [Time since reference or first frame: 0.000179000 seconds] Frame Number: 2 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3)
Re: Problem on SCTP
does this fixed in RHEL7? On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: > On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: >> Hi Xin >> >> do you mean we need to patch the kernel? > Yups, pls comment on that bz if it's really needed for your env. > A z-stream kernel may be available for that issue soon. > > Thanks. > >> >> >> >> On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: >>> On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: Hi the router is actually is a linux running on RHEL6.8 (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT forward. >>> https://bugzilla.redhat.com/show_bug.cgi?id=1412038 >>> >>> sctp_manip_pkt->sctp_compute_cksum: >>> struct sctphdr *sh = sctp_hdr(sub); >>> >>> But in rhel6, skb->transport_header is not yet set at that time. >>> This patch should be backported into rhel6. >>> >>> commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 >>> Author: Eric Dumazet >>> Date: Mon Jul 15 20:03:19 2013 -0700 >>> >>> ipv4: set transport header earlier >>> >>> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: > On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >> Hi, >> >> sorry to get back late, the platform is running on KVM. and this >> problem is resolved by moving to VMware environment, however, a new >> problem is coming out, we noticed that the HB REQ is being ABORT from >> client. >> >> >> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from server to sctp router) >> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >> [HB REQ] (from sctp router to client) >> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >> [ABORT] (from client to sctp router) >> >> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB >> REQ] >> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB >> REQ] >> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >> [ABORT] >> >> For the above packet flow, 10.165.250.22 is the server and >> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >> SCTP router change the src address before forward the HB REQ to the >> client. >> >> But somehow the client is ABORT the HB REQ, any idea? is it related to >> the HEARTBEAT information? or the checksum again>? > The incorrect checksum won't cause ABORT, but the abnormal HB REQ > could be, if HB information was modified when calculating the checksum > on router, the ABORT may be caused in client process. > > is your SCTP router linux ? if yes, what's the kernel version ? > >> >> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >> wrote: On 13 Jan 2017, at 10:43, Michael Tuexen wrote: Your router does NOT change any field in the SCTP packet, but the SCTP checksum was modified from Checksum: 0xbaea49e5 (not verified) to Checksum: 0xa9a86d3f (not verified) At least one of these is wrong. Read the tracefiles in wireshark and enable checksum validation and wireshark will tell you which one is correct. (That is why I asked for .pcap file instead of a .txt). My guess is that the initial checksum is correct and your box middlebox not only changes the destination address and ttl field and header checksum in the IP-header (which is expected) but also incorrectly the SCTP checksum. Since no field in the SCTP packet has changed, the checksum must be the same. >>> At the server have a look at the SNMP counters: >>> cat /proc/net/sctp/snmp >>> You should find a line staring with >>> SctpChecksumErrors >>> If the number reported there is positive, the node received packets >>> with checksum errors. >>> >>> Best regards >>> Michael Best regards Michael > On 13 Jan 2017, at 04:29, Sun Paul wrote: > > Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) > Encapsulation type: Ethernet (1) > Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula > Standard Time > [Time shift for this packet: 0.0 seconds] > Epoch Time: 1483692769.662321000 seconds > [Time delta from previous captured frame: 0.000179000 seconds] > [Time delta from previous displayed frame: 0.000179000 seconds] > [Time since reference or first frame: 0.000179000 seconds] > Frame Number: 2 > Frame Length: 98 bytes (784 bits) > Capture Length: 98 bytes (784 bits) > [Frame is marked: False] > [Frame is ignored: False] > [Protocols in
Re: Problem on SCTP
On Thu, Feb 23, 2017 at 1:30 PM, Sun Paul wrote: > does this fixed in RHEL7? yes, I think so. > > On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: >> On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: >>> Hi Xin >>> >>> do you mean we need to patch the kernel? >> Yups, pls comment on that bz if it's really needed for your env. >> A z-stream kernel may be available for that issue soon. >> >> Thanks. >> >>> >>> >>> >>> On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: > Hi > > the router is actually is a linux running on RHEL6.8 > (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT > forward. https://bugzilla.redhat.com/show_bug.cgi?id=1412038 sctp_manip_pkt->sctp_compute_cksum: struct sctphdr *sh = sctp_hdr(sub); But in rhel6, skb->transport_header is not yet set at that time. This patch should be backported into rhel6. commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 Author: Eric Dumazet Date: Mon Jul 15 20:03:19 2013 -0700 ipv4: set transport header earlier > > On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: >> On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: >>> Hi, >>> >>> sorry to get back late, the platform is running on KVM. and this >>> problem is resolved by moving to VMware environment, however, a new >>> problem is coming out, we noticed that the HB REQ is being ABORT from >>> client. >>> >>> >>> 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from server to sctp router) >>> 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] (from sctp router to client) >>> 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >>> [ABORT] (from client to sctp router) >>> >>> 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) >>> [HB REQ] >>> 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB >>> REQ] >>> 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) >>> [ABORT] >>> >>> For the above packet flow, 10.165.250.22 is the server and >>> 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to >>> client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the >>> SCTP router change the src address before forward the HB REQ to the >>> client. >>> >>> But somehow the client is ABORT the HB REQ, any idea? is it related to >>> the HEARTBEAT information? or the checksum again>? >> The incorrect checksum won't cause ABORT, but the abnormal HB REQ >> could be, if HB information was modified when calculating the checksum >> on router, the ABORT may be caused in client process. >> >> is your SCTP router linux ? if yes, what's the kernel version ? >> >>> >>> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen >>> wrote: > On 13 Jan 2017, at 10:43, Michael Tuexen > wrote: > > Your router does NOT change any field in the SCTP packet, but the > SCTP checksum was modified from > Checksum: 0xbaea49e5 (not verified) > to > Checksum: 0xa9a86d3f (not verified) > At least one of these is wrong. Read the tracefiles in wireshark and > enable checksum validation and wireshark will tell you which one is > correct. (That is why I asked for .pcap file instead of a .txt). > > My guess is that the initial checksum is correct and your box > middlebox > not only changes the destination address and ttl field and header > checksum in the IP-header (which is expected) but also incorrectly the > SCTP checksum. Since no field in the SCTP packet has changed, the > checksum > must be the same. At the server have a look at the SNMP counters: cat /proc/net/sctp/snmp You should find a line staring with SctpChecksumErrors If the number reported there is positive, the node received packets with checksum errors. Best regards Michael > > Best regards > Michael >> On 13 Jan 2017, at 04:29, Sun Paul wrote: >> >> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >> Encapsulation type: Ethernet (1) >> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula >> Standard Time >> [Time shift for this packet: 0.0 seconds] >> Epoch Time: 1483692769.662321000 seconds >> [Time delta from previous captured frame: 0.000179000 seconds] >> [Time delta from previous displayed frame: 0.000179000 seconds] >> [Time since reference or first frame: 0.000179000 seconds] >> Frame Nu
Re: Problem on SCTP
Hi, can I confirm that the problem is on the Linux router itself or on both server and client? On Thu, Feb 23, 2017 at 2:07 PM, Xin Long wrote: > On Thu, Feb 23, 2017 at 1:30 PM, Sun Paul wrote: >> does this fixed in RHEL7? > yes, I think so. > >> >> On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: >>> On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: Hi Xin do you mean we need to patch the kernel? >>> Yups, pls comment on that bz if it's really needed for your env. >>> A z-stream kernel may be available for that issue soon. >>> >>> Thanks. >>> On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: > On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: >> Hi >> >> the router is actually is a linux running on RHEL6.8 >> (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT >> forward. > https://bugzilla.redhat.com/show_bug.cgi?id=1412038 > > sctp_manip_pkt->sctp_compute_cksum: > struct sctphdr *sh = sctp_hdr(sub); > > But in rhel6, skb->transport_header is not yet set at that time. > This patch should be backported into rhel6. > > commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 > Author: Eric Dumazet > Date: Mon Jul 15 20:03:19 2013 -0700 > > ipv4: set transport header earlier > > >> >> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: >>> On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: Hi, sorry to get back late, the platform is running on KVM. and this problem is resolved by moving to VMware environment, however, a new problem is coming out, we noticed that the HB REQ is being ABORT from client. 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from server to sctp router) 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] (from sctp router to client) 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] (from client to sctp router) 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) [HB REQ] 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) [ABORT] For the above packet flow, 10.165.250.22 is the server and 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the SCTP router change the src address before forward the HB REQ to the client. But somehow the client is ABORT the HB REQ, any idea? is it related to the HEARTBEAT information? or the checksum again>? >>> The incorrect checksum won't cause ABORT, but the abnormal HB REQ >>> could be, if HB information was modified when calculating the checksum >>> on router, the ABORT may be caused in client process. >>> >>> is your SCTP router linux ? if yes, what's the kernel version ? >>> On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen wrote: >> On 13 Jan 2017, at 10:43, Michael Tuexen >> wrote: >> >> Your router does NOT change any field in the SCTP packet, but the >> SCTP checksum was modified from >> Checksum: 0xbaea49e5 (not verified) >> to >> Checksum: 0xa9a86d3f (not verified) >> At least one of these is wrong. Read the tracefiles in wireshark and >> enable checksum validation and wireshark will tell you which one is >> correct. (That is why I asked for .pcap file instead of a .txt). >> >> My guess is that the initial checksum is correct and your box >> middlebox >> not only changes the destination address and ttl field and header >> checksum in the IP-header (which is expected) but also incorrectly >> the >> SCTP checksum. Since no field in the SCTP packet has changed, the >> checksum >> must be the same. > At the server have a look at the SNMP counters: > cat /proc/net/sctp/snmp > You should find a line staring with > SctpChecksumErrors > If the number reported there is positive, the node received packets > with checksum errors. > > Best regards > Michael >> >> Best regards >> Michael >>> On 13 Jan 2017, at 04:29, Sun Paul wrote: >>> >>> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >>> Encapsulation type: Ethernet (1) >>> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula >>> Standard Time >>> [Time shift for this packet: 0.0 seconds] >>> Epoch
Re: Problem on SCTP
On Mon, Feb 27, 2017 at 5:01 PM, Sun Paul wrote: > Hi, can I confirm that the problem is on the Linux router itself or on > both server and client? > try with a new kernel in router, like build and install a upstream kernel on your route machine. git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git https://kernelnewbies.org/KernelBuild : part "Setting up your kernel configuration" and part "Building the kernel" > On Thu, Feb 23, 2017 at 2:07 PM, Xin Long wrote: >> On Thu, Feb 23, 2017 at 1:30 PM, Sun Paul wrote: >>> does this fixed in RHEL7? >> yes, I think so. >> >>> >>> On Wed, Feb 22, 2017 at 11:03 AM, Xin Long wrote: On Wed, Feb 22, 2017 at 10:29 AM, Sun Paul wrote: > Hi Xin > > do you mean we need to patch the kernel? Yups, pls comment on that bz if it's really needed for your env. A z-stream kernel may be available for that issue soon. Thanks. > > > > On Wed, Feb 22, 2017 at 10:00 AM, Xin Long wrote: >> On Wed, Feb 22, 2017 at 9:12 AM, Sun Paul wrote: >>> Hi >>> >>> the router is actually is a linux running on RHEL6.8 >>> (2.6.32-642.4.2.el6.x86_64). it uses iptables to do SNAT aand DNAT >>> forward. >> https://bugzilla.redhat.com/show_bug.cgi?id=1412038 >> >> sctp_manip_pkt->sctp_compute_cksum: >> struct sctphdr *sh = sctp_hdr(sub); >> >> But in rhel6, skb->transport_header is not yet set at that time. >> This patch should be backported into rhel6. >> >> commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 >> Author: Eric Dumazet >> Date: Mon Jul 15 20:03:19 2013 -0700 >> >> ipv4: set transport header earlier >> >> >>> >>> On Tue, Feb 21, 2017 at 11:53 PM, Xin Long wrote: On Tue, Feb 21, 2017 at 12:26 PM, Sun Paul wrote: > Hi, > > sorry to get back late, the platform is running on KVM. and this > problem is resolved by moving to VMware environment, however, a new > problem is coming out, we noticed that the HB REQ is being ABORT from > client. > > > 03:32:35.233572 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from server to sctp router) > 03:32:35.233603 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] (from sctp router to client) > 03:32:35.233852 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) > [ABORT] (from client to sctp router) > > 03:32:37.928679 IP 10.165.250.22.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] > 03:32:37.928717 IP 192.168.2.14.3868 > 192.168.2.13.40001: sctp (1) > [HB REQ] > 03:32:37.929247 IP 192.168.2.13.40001 > 192.168.2.14.3868: sctp (1) > [ABORT] > > For the above packet flow, 10.165.250.22 is the server and > 192.168.2.13 is the client, the server 10.165.250.22 sends HB REQ to > client 192.168.2.13 through 192.168.2.14 (the SCTP router), and the > SCTP router change the src address before forward the HB REQ to the > client. > > But somehow the client is ABORT the HB REQ, any idea? is it related to > the HEARTBEAT information? or the checksum again>? The incorrect checksum won't cause ABORT, but the abnormal HB REQ could be, if HB information was modified when calculating the checksum on router, the ABORT may be caused in client process. is your SCTP router linux ? if yes, what's the kernel version ? > > On Fri, Jan 13, 2017 at 9:19 PM, Michael Tuexen > wrote: >>> On 13 Jan 2017, at 10:43, Michael Tuexen >>> wrote: >>> >>> Your router does NOT change any field in the SCTP packet, but the >>> SCTP checksum was modified from >>> Checksum: 0xbaea49e5 (not verified) >>> to >>> Checksum: 0xa9a86d3f (not verified) >>> At least one of these is wrong. Read the tracefiles in wireshark and >>> enable checksum validation and wireshark will tell you which one is >>> correct. (That is why I asked for .pcap file instead of a .txt). >>> >>> My guess is that the initial checksum is correct and your box >>> middlebox >>> not only changes the destination address and ttl field and header >>> checksum in the IP-header (which is expected) but also incorrectly >>> the >>> SCTP checksum. Since no field in the SCTP packet has changed, the >>> checksum >>> must be the same. >> At the server have a look at the SNMP counters: >> cat /proc/net/sctp/snmp >> You should find a line staring with >> SctpChecksumErrors >> If the number reported there is positive, the node received packets >> with checksum errors. >> >> Best regards >>
Re: Problem on SCTP
On Fri, Jan 13, 2017 at 10:43:39AM +0100, Michael Tuexen wrote: > Your router does NOT change any field in the SCTP packet, but the > SCTP checksum was modified from >Checksum: 0xbaea49e5 (not verified) > to >Checksum: 0xa9a86d3f (not verified) Sun, which operating system is your router running? Marcelo
Re: Problem on SCTP
yes. whenever the INIT packet send to 192.168.206.65, it will forward to 192.168.206.66. My question is when this packet arrive to 192.168.206.66, why LKSCTP never pass to user level. On Tue, Jan 10, 2017 at 10:33 PM, Neil Horman wrote: > On Tue, Jan 10, 2017 at 09:30:39AM +0800, Sun Paul wrote: >> Packet received (From client) >> == >> >> No. Time SourceSPort >> Destination Protocol DPort Length Info >> DSCP >> 1 2017-01-06 08:52:49.662142192.168.206.8350001 >> 192.168.206.65SCTP 3868 98 INIT >> CS0 >> >> Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >> Encapsulation type: Ethernet (1) >> Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard >> Time >> [Time shift for this packet: 0.0 seconds] >> Epoch Time: 1483692769.662142000 seconds >> [Time delta from previous captured frame: 0.0 seconds] >> [Time delta from previous displayed frame: 0.0 seconds] >> [Time since reference or first frame: 0.0 seconds] >> Frame Number: 1 >> Frame Length: 98 bytes (784 bits) >> Capture Length: 98 bytes (784 bits) >> [Frame is marked: False] >> [Frame is ignored: False] >> [Protocols in frame: eth:ethertype:ip:sctp] >> Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: >> Vmware_81:41:6b (00:50:56:81:41:6b) >> Destination: Vmware_81:41:6b (00:50:56:81:41:6b) >> Address: Vmware_81:41:6b (00:50:56:81:41:6b) >> ..0. = LG bit: Globally unique >> address (factory default) >> ...0 = IG bit: Individual address (unicast) >> Source: RealtekU_54:81:87 (52:54:00:54:81:87) >> Address: RealtekU_54:81:87 (52:54:00:54:81:87) >> ..1. = LG bit: Locally administered >> address (this is NOT the factory default) >> ...0 = IG bit: Individual address (unicast) >> Type: IPv4 (0x0800) >> Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 >> 0100 = Version: 4 >> 0101 = Header Length: 20 bytes (5) >> Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) >> 00.. = Differentiated Services Codepoint: Default (0) >> ..10 = Explicit Congestion Notification: ECN-Capable >> Transport codepoint '10' (2) >> Total Length: 84 >> Identification: 0x (0) >> Flags: 0x02 (Don't Fragment) >> 0... = Reserved bit: Not set >> .1.. = Don't fragment: Set >> ..0. = More fragments: Not set >> Fragment offset: 0 >> Time to live: 64 >> Protocol: SCTP (132) >> Header checksum: 0x1c3e [validation disabled] >> [Good: False] >> [Bad: False] >> Source: 192.168.206.83 >> Destination: 192.168.206.65 >> [Source GeoIP: Unknown] >> [Destination GeoIP: Unknown] >> Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst >> Port: 3868 (3868) >> Source port: 50001 >> Destination port: 3868 >> Verification tag: 0x >> [Assocation index: 0] >> Checksum: 0xbaea49e5 (not verified) >> INIT chunk (Outbound streams: 3000, inbound streams: 3000) >> Chunk type: INIT (1) >> 0... = Bit: Stop processing of the packet >> .0.. = Bit: Do not report >> Chunk flags: 0x00 >> Chunk length: 52 >> Initiate tag: 0xe79f40cb >> Advertised receiver window credit (a_rwnd): 62464 >> Number of outbound streams: 3000 >> Number of inbound streams: 3000 >> Initial TSN: 176990880 >> IPv4 address parameter (Address: 192.168.206.83) >> Parameter type: IPv4 address (0x0005) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >> IP Version 4 address: 192.168.206.83 >> IPv4 address parameter (Address: 192.168.1.83) >> Parameter type: IPv4 address (0x0005) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >> IP Version 4 address: 192.168.1.83 >> Supported address types parameter (Supported types: IPv6, IPv4) >> Parameter type: Supported address types (0x000c) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >> Supported address type: IPv6 address (6) >> Supported address type: IPv4 address (5) >> ECN parameter >> Parameter type: ECN (0x8000) >> 1... ..
Re: Problem on SCTP
On Wed, Jan 11, 2017 at 04:39:29PM +0800, Sun Paul wrote: > yes. whenever the INIT packet send to 192.168.206.65, it will forward > to 192.168.206.66. My question is when this packet arrive to > 192.168.206.66, why LKSCTP never pass to user level. > Yessoo, unlike what you said before, there is some address translation to take into account here. You need to be prepared for that: https://docs.google.com/viewer?url=http://www.sigcomm.org/sites/default/files/ccr/papers/2009/January/1496091-1496095.pdf Neil > On Tue, Jan 10, 2017 at 10:33 PM, Neil Horman wrote: > > On Tue, Jan 10, 2017 at 09:30:39AM +0800, Sun Paul wrote: > >> Packet received (From client) > >> == > >> > >> No. Time SourceSPort > >> Destination Protocol DPort Length Info > >> DSCP > >> 1 2017-01-06 08:52:49.662142192.168.206.8350001 > >> 192.168.206.65SCTP 3868 98 INIT > >> CS0 > >> > >> Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) > >> Encapsulation type: Ethernet (1) > >> Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard > >> Time > >> [Time shift for this packet: 0.0 seconds] > >> Epoch Time: 1483692769.662142000 seconds > >> [Time delta from previous captured frame: 0.0 seconds] > >> [Time delta from previous displayed frame: 0.0 seconds] > >> [Time since reference or first frame: 0.0 seconds] > >> Frame Number: 1 > >> Frame Length: 98 bytes (784 bits) > >> Capture Length: 98 bytes (784 bits) > >> [Frame is marked: False] > >> [Frame is ignored: False] > >> [Protocols in frame: eth:ethertype:ip:sctp] > >> Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: > >> Vmware_81:41:6b (00:50:56:81:41:6b) > >> Destination: Vmware_81:41:6b (00:50:56:81:41:6b) > >> Address: Vmware_81:41:6b (00:50:56:81:41:6b) > >> ..0. = LG bit: Globally unique > >> address (factory default) > >> ...0 = IG bit: Individual address > >> (unicast) > >> Source: RealtekU_54:81:87 (52:54:00:54:81:87) > >> Address: RealtekU_54:81:87 (52:54:00:54:81:87) > >> ..1. = LG bit: Locally administered > >> address (this is NOT the factory default) > >> ...0 = IG bit: Individual address > >> (unicast) > >> Type: IPv4 (0x0800) > >> Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 > >> 0100 = Version: 4 > >> 0101 = Header Length: 20 bytes (5) > >> Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) > >> 00.. = Differentiated Services Codepoint: Default (0) > >> ..10 = Explicit Congestion Notification: ECN-Capable > >> Transport codepoint '10' (2) > >> Total Length: 84 > >> Identification: 0x (0) > >> Flags: 0x02 (Don't Fragment) > >> 0... = Reserved bit: Not set > >> .1.. = Don't fragment: Set > >> ..0. = More fragments: Not set > >> Fragment offset: 0 > >> Time to live: 64 > >> Protocol: SCTP (132) > >> Header checksum: 0x1c3e [validation disabled] > >> [Good: False] > >> [Bad: False] > >> Source: 192.168.206.83 > >> Destination: 192.168.206.65 > >> [Source GeoIP: Unknown] > >> [Destination GeoIP: Unknown] > >> Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst > >> Port: 3868 (3868) > >> Source port: 50001 > >> Destination port: 3868 > >> Verification tag: 0x > >> [Assocation index: 0] > >> Checksum: 0xbaea49e5 (not verified) > >> INIT chunk (Outbound streams: 3000, inbound streams: 3000) > >> Chunk type: INIT (1) > >> 0... = Bit: Stop processing of the packet > >> .0.. = Bit: Do not report > >> Chunk flags: 0x00 > >> Chunk length: 52 > >> Initiate tag: 0xe79f40cb > >> Advertised receiver window credit (a_rwnd): 62464 > >> Number of outbound streams: 3000 > >> Number of inbound streams: 3000 > >> Initial TSN: 176990880 > >> IPv4 address parameter (Address: 192.168.206.83) > >> Parameter type: IPv4 address (0x0005) > >> 0... = Bit: Stop processing of chunk > >> .0.. = Bit: Do not report > >> Parameter length: 8 > >> IP Version 4 address: 192.168.206.83 > >> IPv4 address parameter (Address: 192.168.1.83) > >> Parameter type: IPv4 address (0x0005) > >> 0... = Bit: Stop processing of chunk > >> .0.. = Bit: Do not report > >> Parameter length: 8 > >> IP Version 4 address
Re: Problem on SCTP
HI Let me clear the understanding. below is the flow. 1. Client sends to Linux Router: 192.168.206.83 -> 192.168.206.56, 2. Linux router sends to SERVER where the source IP is unchanged: 192.168.206.83 -> 192.168.206.66 My question here is why SERVER cannot response this INIT chunk? On Wed, Jan 11, 2017 at 8:57 PM, Neil Horman wrote: > On Wed, Jan 11, 2017 at 04:39:29PM +0800, Sun Paul wrote: >> yes. whenever the INIT packet send to 192.168.206.65, it will forward >> to 192.168.206.66. My question is when this packet arrive to >> 192.168.206.66, why LKSCTP never pass to user level. >> > > Yessoo, unlike what you said before, there is some address translation to > take into account here. You need to be prepared for that: > > https://docs.google.com/viewer?url=http://www.sigcomm.org/sites/default/files/ccr/papers/2009/January/1496091-1496095.pdf > > Neil > >> On Tue, Jan 10, 2017 at 10:33 PM, Neil Horman wrote: >> > On Tue, Jan 10, 2017 at 09:30:39AM +0800, Sun Paul wrote: >> >> Packet received (From client) >> >> == >> >> >> >> No. Time SourceSPort >> >> Destination Protocol DPort Length Info >> >> DSCP >> >> 1 2017-01-06 08:52:49.662142192.168.206.8350001 >> >> 192.168.206.65SCTP 3868 98 INIT >> >> CS0 >> >> >> >> Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >> >> Encapsulation type: Ethernet (1) >> >> Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula >> >> Standard Time >> >> [Time shift for this packet: 0.0 seconds] >> >> Epoch Time: 1483692769.662142000 seconds >> >> [Time delta from previous captured frame: 0.0 seconds] >> >> [Time delta from previous displayed frame: 0.0 seconds] >> >> [Time since reference or first frame: 0.0 seconds] >> >> Frame Number: 1 >> >> Frame Length: 98 bytes (784 bits) >> >> Capture Length: 98 bytes (784 bits) >> >> [Frame is marked: False] >> >> [Frame is ignored: False] >> >> [Protocols in frame: eth:ethertype:ip:sctp] >> >> Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: >> >> Vmware_81:41:6b (00:50:56:81:41:6b) >> >> Destination: Vmware_81:41:6b (00:50:56:81:41:6b) >> >> Address: Vmware_81:41:6b (00:50:56:81:41:6b) >> >> ..0. = LG bit: Globally unique >> >> address (factory default) >> >> ...0 = IG bit: Individual address >> >> (unicast) >> >> Source: RealtekU_54:81:87 (52:54:00:54:81:87) >> >> Address: RealtekU_54:81:87 (52:54:00:54:81:87) >> >> ..1. = LG bit: Locally administered >> >> address (this is NOT the factory default) >> >> ...0 = IG bit: Individual address >> >> (unicast) >> >> Type: IPv4 (0x0800) >> >> Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 >> >> 0100 = Version: 4 >> >> 0101 = Header Length: 20 bytes (5) >> >> Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) >> >> 00.. = Differentiated Services Codepoint: Default (0) >> >> ..10 = Explicit Congestion Notification: ECN-Capable >> >> Transport codepoint '10' (2) >> >> Total Length: 84 >> >> Identification: 0x (0) >> >> Flags: 0x02 (Don't Fragment) >> >> 0... = Reserved bit: Not set >> >> .1.. = Don't fragment: Set >> >> ..0. = More fragments: Not set >> >> Fragment offset: 0 >> >> Time to live: 64 >> >> Protocol: SCTP (132) >> >> Header checksum: 0x1c3e [validation disabled] >> >> [Good: False] >> >> [Bad: False] >> >> Source: 192.168.206.83 >> >> Destination: 192.168.206.65 >> >> [Source GeoIP: Unknown] >> >> [Destination GeoIP: Unknown] >> >> Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst >> >> Port: 3868 (3868) >> >> Source port: 50001 >> >> Destination port: 3868 >> >> Verification tag: 0x >> >> [Assocation index: 0] >> >> Checksum: 0xbaea49e5 (not verified) >> >> INIT chunk (Outbound streams: 3000, inbound streams: 3000) >> >> Chunk type: INIT (1) >> >> 0... = Bit: Stop processing of the packet >> >> .0.. = Bit: Do not report >> >> Chunk flags: 0x00 >> >> Chunk length: 52 >> >> Initiate tag: 0xe79f40cb >> >> Advertised receiver window credit (a_rwnd): 62464 >> >> Number of outbound streams: 3000 >> >> Number of inbound streams: 3000 >> >> Initial TSN: 176990880 >> >> IPv4 address parameter (Address: 192.168.206.83) >> >> Parameter type: IPv4 address (0x0005) >> >> 0... = Bit: Stop processing of chunk >> >> .0.. .
RE: Problem on SCTP
From: Sun Paul [mailto:paul...@gmail.com] > Sent: 12 January 2017 09:31 > Let me clear the understanding. below is the flow. > > 1. Client sends to Linux Router: 192.168.206.83 -> 192.168.206.56, > 2. Linux router sends to SERVER where the source IP is unchanged: > 192.168.206.83 -> 192.168.206.66 > > My question here is why SERVER cannot response this INIT chunk? Probably because the IP addresses embedded in the SCTP packet don't match the ones in the IP header. David
Re: Problem on SCTP
> On 12 Jan 2017, at 10:51, David Laight wrote: > > From: Sun Paul [mailto:paul...@gmail.com] >> Sent: 12 January 2017 09:31 >> Let me clear the understanding. below is the flow. >> >> 1. Client sends to Linux Router: 192.168.206.83 -> 192.168.206.56, >> 2. Linux router sends to SERVER where the source IP is unchanged: >> 192.168.206.83 -> 192.168.206.66 >> >> My question here is why SERVER cannot response this INIT chunk? > > Probably because the IP addresses embedded in the SCTP packet > don't match the ones in the IP header. I don't know if it matters on the linux implementation, but it shouldn't. An SCTP endpoint should consider the source address of the packet containing the INIT chunk and all the addresses listed in the INIT chunk as valid peer addresses. Could we get a .pcap file of the packet containing the INIT chunk captured at the server? I would expect an INIT-ACK or and ABORT. If that is not sent, the checksum was wrong or some kind of packet filtering is active on the server... Best regards Michael > > David > > N§ēæėrļyúčØbēXŽķĮ§vØ^)Þš{.nĮ+·Ĩ{ąąËi{ayšĘÚë,jĒfĢĒ·hāzđŪwĨĒļ > Ē·Ķj:+vĻwčjØmķĸūŦęįzZ+ųÝĒj"ú!
Re: Problem on SCTP
Hi All below is the packet trace in text format. Packet received (From client to router) [ Source IP: 192.168.206.83, Destination IP: 192.168.206.65. the IPv4 address parameter is 192.168.206.83 and 192.168.1.83 ] == No. Time SourceSPort Destination Protocol DPort Length Info DSCP 1 2017-01-06 08:52:49.662142192.168.206.8350001 192.168.206.65SCTP 3868 98 INIT CS0 Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662142000 seconds [Time delta from previous captured frame: 0.0 seconds] [Time delta from previous displayed frame: 0.0 seconds] [Time since reference or first frame: 0.0 seconds] Frame Number: 1 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: Vmware_81:41:6b (00:50:56:81:41:6b) Destination: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: RealtekU_54:81:87 (52:54:00:54:81:87) Address: RealtekU_54:81:87 (52:54:00:54:81:87) ..1. = LG bit: Locally administered address (this is NOT the factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 64 Protocol: SCTP (132) Header checksum: 0x1c3e [validation disabled] [Good: False] [Bad: False] Source: 192.168.206.83 Destination: 192.168.206.65 [Source GeoIP: Unknown] [Destination GeoIP: Unknown] Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst Port: 3868 (3868) Source port: 50001 Destination port: 3868 Verification tag: 0x [Assocation index: 0] Checksum: 0xbaea49e5 (not verified) INIT chunk (Outbound streams: 3000, inbound streams: 3000) Chunk type: INIT (1) 0... = Bit: Stop processing of the packet .0.. = Bit: Do not report Chunk flags: 0x00 Chunk length: 52 Initiate tag: 0xe79f40cb Advertised receiver window credit (a_rwnd): 62464 Number of outbound streams: 3000 Number of inbound streams: 3000 Initial TSN: 176990880 IPv4 address parameter (Address: 192.168.206.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.206.83 IPv4 address parameter (Address: 192.168.1.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.1.83 Supported address types parameter (Supported types: IPv6, IPv4) Parameter type: Supported address types (0x000c) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 Supported address type: IPv6 address (6) Supported address type: IPv4 address (5) ECN parameter Parameter type: ECN (0x8000) 1... = Bit: Skip parameter and continue processing of the chunk .0.. = Bit: Do not report Parameter length: 4 Forward TSN supported parameter Parameter type: Forward TSN supported (0xc000) 1... = Bit: Skip parameter and continue processing of the chunk .1.. = Bit: Do report
Re: Problem on SCTP
Packet to SERVER (from router to SERVER)[ Source IP: 192.168.206.83, Destination IP: 192.168.206.66. the IPv4 address parameter is 192.168.206.83 and 192.168.1.83 ] No. Time SourceSPort Destination Protocol DPort Length Info DSCP 2 2017-01-06 08:52:49.662321192.168.206.8350001 192.168.206.66SCTP 3868 98 INIT CS0 Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662321000 seconds [Time delta from previous captured frame: 0.000179000 seconds] [Time delta from previous displayed frame: 0.000179000 seconds] [Time since reference or first frame: 0.000179000 seconds] Frame Number: 2 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 63 Protocol: SCTP (132) Header checksum: 0x1d3d [validation disabled] [Good: False] [Bad: False] Source: 192.168.206.83 Destination: 192.168.206.66 [Source GeoIP: Unknown] [Destination GeoIP: Unknown] Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst Port: 3868 (3868) Source port: 50001 Destination port: 3868 Verification tag: 0x [Assocation index: 0] Checksum: 0xa9a86d3f (not verified) On Fri, Jan 13, 2017 at 11:27 AM, Sun Paul wrote: > Hi All > > below is the packet trace in text format. > > > Packet received (From client to router) [ Source IP: 192.168.206.83, > Destination IP: 192.168.206.65. the IPv4 address parameter is > 192.168.206.83 and 192.168.1.83 ] > == > > No. Time SourceSPort > Destination Protocol DPort Length Info > DSCP > 1 2017-01-06 08:52:49.662142192.168.206.8350001 > 192.168.206.65SCTP 3868 98 INIT > CS0 > > Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) > Encapsulation type: Ethernet (1) > Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard > Time > [Time shift for this packet: 0.0 seconds] > Epoch Time: 1483692769.662142000 seconds > [Time delta from previous captured frame: 0.0 seconds] > [Time delta from previous displayed frame: 0.0 seconds] > [Time since reference or first frame: 0.0 seconds] > Frame Number: 1 > Frame Length: 98 bytes (784 bits) > Capture Length: 98 bytes (784 bits) > [Frame is marked: False] > [Frame is ignored: False] > [Protocols in frame: eth:ethertype:ip:sctp] > Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: > Vmware_81:41:6b (00:50:56:81:41:6b) > Destination: Vmware_81:41:6b (00:50:56:81:41:6b) > Address: Vmware_81:41:6b (00:50:56:81:41:6b) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) > Source: RealtekU_54:81:87 (52:54:00:54:81:87) > Address: RealtekU_54:81:87 (52:54:00:54:81:87) > ..1. = LG bit: Locally administered > address (this is NOT the factory default) > ...0 = IG bit: Individual address (unicast) > Typ
Re: Problem on SCTP
Packet to SERVER (From router to SERVER) [ Source IP: 192.168.206.83, Destination IP: 192.168.206.66. the IPv4 address parameter is 192.168.206.83 and 192.168.1.83 ] No. Time SourceSPort Destination Protocol DPort Length Info DSCP 2 2017-01-06 08:52:49.662321192.168.206.8350001 192.168.206.66SCTP 3868 98 INIT CS0 Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662321000 seconds [Time delta from previous captured frame: 0.000179000 seconds] [Time delta from previous displayed frame: 0.000179000 seconds] [Time since reference or first frame: 0.000179000 seconds] Frame Number: 2 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 63 Protocol: SCTP (132) Header checksum: 0x1d3d [validation disabled] [Good: False] [Bad: False] Source: 192.168.206.83 Destination: 192.168.206.66 [Source GeoIP: Unknown] [Destination GeoIP: Unknown] Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst Port: 3868 (3868) Source port: 50001 Destination port: 3868 Verification tag: 0x [Assocation index: 0] Checksum: 0xa9a86d3f (not verified) INIT chunk (Outbound streams: 3000, inbound streams: 3000) Chunk type: INIT (1) 0... = Bit: Stop processing of the packet .0.. = Bit: Do not report Chunk flags: 0x00 Chunk length: 52 Initiate tag: 0xe79f40cb Advertised receiver window credit (a_rwnd): 62464 Number of outbound streams: 3000 Number of inbound streams: 3000 Initial TSN: 176990880 IPv4 address parameter (Address: 192.168.206.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.206.83 IPv4 address parameter (Address: 192.168.1.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.1.83 Supported address types parameter (Supported types: IPv6, IPv4) Parameter type: Supported address types (0x000c) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 Supported address type: IPv6 address (6) Supported address type: IPv4 address (5) ECN parameter Parameter type: ECN (0x8000) 1... = Bit: Skip parameter and continue processing of the chunk .0.. = Bit: Do not report Parameter length: 4 Forward TSN supported parameter Parameter type: Forward TSN supported (0xc000) 1... = Bit: Skip parameter and continue processing of the chunk .1.. = Bit: Do report Parameter length: 4 On Fri, Jan 13, 2017 at 11:27 AM, Sun Paul wrote: > Hi All
Re: Problem on SCTP
Your router does NOT change any field in the SCTP packet, but the SCTP checksum was modified from Checksum: 0xbaea49e5 (not verified) to Checksum: 0xa9a86d3f (not verified) At least one of these is wrong. Read the tracefiles in wireshark and enable checksum validation and wireshark will tell you which one is correct. (That is why I asked for .pcap file instead of a .txt). My guess is that the initial checksum is correct and your box middlebox not only changes the destination address and ttl field and header checksum in the IP-header (which is expected) but also incorrectly the SCTP checksum. Since no field in the SCTP packet has changed, the checksum must be the same. Best regards Michael > On 13 Jan 2017, at 04:29, Sun Paul wrote: > > Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >Encapsulation type: Ethernet (1) >Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time >[Time shift for this packet: 0.0 seconds] >Epoch Time: 1483692769.662321000 seconds >[Time delta from previous captured frame: 0.000179000 seconds] >[Time delta from previous displayed frame: 0.000179000 seconds] >[Time since reference or first frame: 0.000179000 seconds] >Frame Number: 2 >Frame Length: 98 bytes (784 bits) >Capture Length: 98 bytes (784 bits) >[Frame is marked: False] >[Frame is ignored: False] >[Protocols in frame: eth:ethertype:ip:sctp] > Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: > Vmware_81:a6:a3 (00:50:56:81:a6:a3) >Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) >Source: Vmware_81:41:6b (00:50:56:81:41:6b) >Address: Vmware_81:41:6b (00:50:56:81:41:6b) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) >Type: IPv4 (0x0800) > Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 >0100 = Version: 4 > 0101 = Header Length: 20 bytes (5) >Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) > 00.. = Differentiated Services Codepoint: Default (0) > ..10 = Explicit Congestion Notification: ECN-Capable > Transport codepoint '10' (2) >Total Length: 84 >Identification: 0x (0) >Flags: 0x02 (Don't Fragment) >0... = Reserved bit: Not set >.1.. = Don't fragment: Set >..0. = More fragments: Not set >Fragment offset: 0 >Time to live: 63 >Protocol: SCTP (132) >Header checksum: 0x1d3d [validation disabled] >[Good: False] >[Bad: False] >Source: 192.168.206.83 >Destination: 192.168.206.66 >[Source GeoIP: Unknown] >[Destination GeoIP: Unknown] > Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst > Port: 3868 (3868) >Source port: 50001 >Destination port: 3868 >Verification tag: 0x >[Assocation index: 0] >Checksum: 0xa9a86d3f (not verified) > >INIT chunk (Outbound streams: 3000, inbound streams: 3000) >Chunk type: INIT (1) >0... = Bit: Stop processing of the packet >.0.. = Bit: Do not report >Chunk flags: 0x00 >Chunk length: 52 >Initiate tag: 0xe79f40cb >Advertised receiver window credit (a_rwnd): 62464 >Number of outbound streams: 3000 >Number of inbound streams: 3000 >Initial TSN: 176990880 >IPv4 address parameter (Address: 192.168.206.83) >Parameter type: IPv4 address (0x0005) >0... = Bit: Stop processing of chunk >.0.. = Bit: Do not report >Parameter length: 8 >IP Version 4 address: 192.168.206.83 >IPv4 address parameter (Address: 192.168.1.83) >Parameter type: IPv4 address (0x0005) >0... = Bit: Stop processing of chunk >.0.. = Bit: Do not report >Parameter length: 8 >IP Version 4 address: 192.168.1.83 >Supported address types parameter (Supported types: IPv6, IPv4) >Parameter type: Supported address types (0x000c) >0... = Bit: Stop processing of chunk >.0.. = Bit: Do not report >Parameter length: 8 >Supported address type: IPv6 address (6) >Supported address type: IPv4 address (5) >ECN parameter >Parameter type: ECN (0x8000) >1... = Bit: Skip parameter and continue > processing of the chunk >.0.. = Bit: Do not report >Par
Re: Problem on SCTP
> On 13 Jan 2017, at 10:43, Michael Tuexen > wrote: > > Your router does NOT change any field in the SCTP packet, but the > SCTP checksum was modified from > Checksum: 0xbaea49e5 (not verified) > to > Checksum: 0xa9a86d3f (not verified) > At least one of these is wrong. Read the tracefiles in wireshark and > enable checksum validation and wireshark will tell you which one is > correct. (That is why I asked for .pcap file instead of a .txt). > > My guess is that the initial checksum is correct and your box middlebox > not only changes the destination address and ttl field and header > checksum in the IP-header (which is expected) but also incorrectly the > SCTP checksum. Since no field in the SCTP packet has changed, the checksum > must be the same. At the server have a look at the SNMP counters: cat /proc/net/sctp/snmp You should find a line staring with SctpChecksumErrors If the number reported there is positive, the node received packets with checksum errors. Best regards Michael > > Best regards > Michael >> On 13 Jan 2017, at 04:29, Sun Paul wrote: >> >> Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) >> Encapsulation type: Ethernet (1) >> Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time >> [Time shift for this packet: 0.0 seconds] >> Epoch Time: 1483692769.662321000 seconds >> [Time delta from previous captured frame: 0.000179000 seconds] >> [Time delta from previous displayed frame: 0.000179000 seconds] >> [Time since reference or first frame: 0.000179000 seconds] >> Frame Number: 2 >> Frame Length: 98 bytes (784 bits) >> Capture Length: 98 bytes (784 bits) >> [Frame is marked: False] >> [Frame is ignored: False] >> [Protocols in frame: eth:ethertype:ip:sctp] >> Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: >> Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) >> ..0. = LG bit: Globally unique >> address (factory default) >> ...0 = IG bit: Individual address (unicast) >> Source: Vmware_81:41:6b (00:50:56:81:41:6b) >> Address: Vmware_81:41:6b (00:50:56:81:41:6b) >> ..0. = LG bit: Globally unique >> address (factory default) >> ...0 = IG bit: Individual address (unicast) >> Type: IPv4 (0x0800) >> Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 >> 0100 = Version: 4 >> 0101 = Header Length: 20 bytes (5) >> Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) >> 00.. = Differentiated Services Codepoint: Default (0) >> ..10 = Explicit Congestion Notification: ECN-Capable >> Transport codepoint '10' (2) >> Total Length: 84 >> Identification: 0x (0) >> Flags: 0x02 (Don't Fragment) >> 0... = Reserved bit: Not set >> .1.. = Don't fragment: Set >> ..0. = More fragments: Not set >> Fragment offset: 0 >> Time to live: 63 >> Protocol: SCTP (132) >> Header checksum: 0x1d3d [validation disabled] >> [Good: False] >> [Bad: False] >> Source: 192.168.206.83 >> Destination: 192.168.206.66 >> [Source GeoIP: Unknown] >> [Destination GeoIP: Unknown] >> Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst >> Port: 3868 (3868) >> Source port: 50001 >> Destination port: 3868 >> Verification tag: 0x >> [Assocation index: 0] >> Checksum: 0xa9a86d3f (not verified) >> >> INIT chunk (Outbound streams: 3000, inbound streams: 3000) >> Chunk type: INIT (1) >> 0... = Bit: Stop processing of the packet >> .0.. = Bit: Do not report >> Chunk flags: 0x00 >> Chunk length: 52 >> Initiate tag: 0xe79f40cb >> Advertised receiver window credit (a_rwnd): 62464 >> Number of outbound streams: 3000 >> Number of inbound streams: 3000 >> Initial TSN: 176990880 >> IPv4 address parameter (Address: 192.168.206.83) >> Parameter type: IPv4 address (0x0005) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >> IP Version 4 address: 192.168.206.83 >> IPv4 address parameter (Address: 192.168.1.83) >> Parameter type: IPv4 address (0x0005) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >> IP Version 4 address: 192.168.1.83 >> Supported address types parameter (Supported types: IPv6, IPv4) >> Parameter type: Supported address types (0x000c) >> 0... = Bit: Stop processing of chunk >> .0.. = Bit: Do not report >> Parameter length: 8 >>
Re: Problem on SCTP
Hi I actually have set the rp_filter to 2 already but still the same. On Fri, Jan 6, 2017 at 7:43 PM, Marcelo Ricardo Leitner wrote: > Hi, > > On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote: >> Hi >> >> I am setting up a lab where the SCTP traffics from client is passing >> through a linux router before reaching to the SCTP server running >> LKSCTP. >> >> The linux router did not change the source address of the client, so >> when it arrived to the SCTP server, the source address is the oriingal >> one. >> >> however, I found that there is no response from the SCTP server, any >> idea on this? >> >> if I connect the client directly to the SCTP server, it do not have any >> issue. > > This seems to be a routing issue then, specially if you're using > rp_filter. Make sure the server can reach that foreign address the > client uses. > > Marcelo > >> >> help pls >> >> rbk >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >>
Re: Problem on SCTP
Hi the INIT chunk arrive on the SERVER, but then no response. the application that using in SERVER is the same as the other test. I noticed one thing in Ethernet frame of the incoming packet on the SERVER compared to the one captured from the client is the LG bit on the source address. The LG bit is set to 0 on the request packet received in the SERVER,but it is 0 from the one originated on the client. willl it be the root cause? On Fri, Jan 6, 2017 at 8:37 PM, Neil Horman wrote: > On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote: >> Hi >> >> I am setting up a lab where the SCTP traffics from client is passing >> through a linux router before reaching to the SCTP server running >> LKSCTP. >> >> The linux router did not change the source address of the client, so >> when it arrived to the SCTP server, the source address is the oriingal >> one. >> >> however, I found that there is no response from the SCTP server, any >> idea on this? >> >> if I connect the client directly to the SCTP server, it do not have any >> issue. >> >> help pls >> >> rbk >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > Start with a tcpdump on the client and the server and attempt a connection, > check to see if the INIT and INIT-ACK chunks are arriving appropriately. > > Neil >
Re: Problem on SCTP
OK. I actually verified the connectivity using SSH to port 22. it works. so I do not have any idea why it has problem on SCTP. need more help on this. is there anyway to enable debug? the version that I am using is lksctp-tools-1.0.10-7 On Mon, Jan 9, 2017 at 10:08 AM, Sun Paul wrote: > Hi > > the INIT chunk arrive on the SERVER, but then no response. the > application that using in SERVER is the same as the other test. > > I noticed one thing in Ethernet frame of the incoming packet on the > SERVER compared to the one captured from the client is the LG bit on > the source address. > > The LG bit is set to 0 on the request packet received in the > SERVER,but it is 0 from the one originated on the client. willl it be > the root cause? > > > > On Fri, Jan 6, 2017 at 8:37 PM, Neil Horman wrote: >> On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote: >>> Hi >>> >>> I am setting up a lab where the SCTP traffics from client is passing >>> through a linux router before reaching to the SCTP server running >>> LKSCTP. >>> >>> The linux router did not change the source address of the client, so >>> when it arrived to the SCTP server, the source address is the oriingal >>> one. >>> >>> however, I found that there is no response from the SCTP server, any >>> idea on this? >>> >>> if I connect the client directly to the SCTP server, it do not have any >>> issue. >>> >>> help pls >>> >>> rbk >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in >>> the body of a message to majord...@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> >> Start with a tcpdump on the client and the server and attempt a connection, >> check to see if the INIT and INIT-ACK chunks are arriving appropriately. >> >> Neil >>
RE: Problem on SCTP
From: Sun Paul > Sent: 09 January 2017 02:08 > >> I am setting up a lab where the SCTP traffics from client is passing > >> through a linux router before reaching to the SCTP server running > >> LKSCTP. > >> > >> The linux router did not change the source address of the client, so > >> when it arrived to the SCTP server, the source address is the oriingal > >> one. > > the INIT chunk arrive on the SERVER, but then no response. the > application that using in SERVER is the same as the other test. > > I noticed one thing in Ethernet frame of the incoming packet on the > SERVER compared to the one captured from the client is the LG bit on > the source address. > > The LG bit is set to 0 on the request packet received in the > SERVER,but it is 0 from the one originated on the client. willl it be > the root cause? Which addresses are you talking about, and what do you mean by the LG bit? Is your linux 'router' just routing (ie IP forwarding) or is it doing NAT? If it is changing the IP addresses then the addresses inside some SCTP chunks also need changing. David
Re: Problem on SCTP
Hi the linux router just change the destination, so it can arrive on the the SERVER. On Mon, Jan 9, 2017 at 5:51 PM, David Laight wrote: > From: Sun Paul >> Sent: 09 January 2017 02:08 > >> >> I am setting up a lab where the SCTP traffics from client is passing >> >> through a linux router before reaching to the SCTP server running >> >> LKSCTP. >> >> >> >> The linux router did not change the source address of the client, so >> >> when it arrived to the SCTP server, the source address is the oriingal >> >> one. >> >> the INIT chunk arrive on the SERVER, but then no response. the >> application that using in SERVER is the same as the other test. >> >> I noticed one thing in Ethernet frame of the incoming packet on the >> SERVER compared to the one captured from the client is the LG bit on >> the source address. >> >> The LG bit is set to 0 on the request packet received in the >> SERVER,but it is 0 from the one originated on the client. willl it be >> the root cause? > > Which addresses are you talking about, and what do you mean by the LG bit? > > Is your linux 'router' just routing (ie IP forwarding) or is it doing NAT? > If it is changing the IP addresses then the addresses inside some SCTP > chunks also need changing. > > David >
Re: Problem on SCTP
On Mon, Jan 09, 2017 at 06:00:36PM +0800, Sun Paul wrote: > Hi > > the linux router just change the destination, so it can arrive on the > the SERVER. > Please post the relevant snippets from the client and server tcpdump operations Neil > On Mon, Jan 9, 2017 at 5:51 PM, David Laight wrote: > > From: Sun Paul > >> Sent: 09 January 2017 02:08 > > > >> >> I am setting up a lab where the SCTP traffics from client is passing > >> >> through a linux router before reaching to the SCTP server running > >> >> LKSCTP. > >> >> > >> >> The linux router did not change the source address of the client, so > >> >> when it arrived to the SCTP server, the source address is the oriingal > >> >> one. > >> > >> the INIT chunk arrive on the SERVER, but then no response. the > >> application that using in SERVER is the same as the other test. > >> > >> I noticed one thing in Ethernet frame of the incoming packet on the > >> SERVER compared to the one captured from the client is the LG bit on > >> the source address. > >> > >> The LG bit is set to 0 on the request packet received in the > >> SERVER,but it is 0 from the one originated on the client. willl it be > >> the root cause? > > > > Which addresses are you talking about, and what do you mean by the LG bit? > > > > Is your linux 'router' just routing (ie IP forwarding) or is it doing NAT? > > If it is changing the IP addresses then the addresses inside some SCTP > > chunks also need changing. > > > > David > > >
Re: Problem on SCTP
what kind of information do you need? the whole INIT packet? On Mon, Jan 9, 2017 at 8:25 PM, Neil Horman wrote: > On Mon, Jan 09, 2017 at 06:00:36PM +0800, Sun Paul wrote: >> Hi >> >> the linux router just change the destination, so it can arrive on the >> the SERVER. >> > Please post the relevant snippets from the client and server tcpdump > operations > > Neil > >> On Mon, Jan 9, 2017 at 5:51 PM, David Laight wrote: >> > From: Sun Paul >> >> Sent: 09 January 2017 02:08 >> > >> >> >> I am setting up a lab where the SCTP traffics from client is passing >> >> >> through a linux router before reaching to the SCTP server running >> >> >> LKSCTP. >> >> >> >> >> >> The linux router did not change the source address of the client, so >> >> >> when it arrived to the SCTP server, the source address is the oriingal >> >> >> one. >> >> >> >> the INIT chunk arrive on the SERVER, but then no response. the >> >> application that using in SERVER is the same as the other test. >> >> >> >> I noticed one thing in Ethernet frame of the incoming packet on the >> >> SERVER compared to the one captured from the client is the LG bit on >> >> the source address. >> >> >> >> The LG bit is set to 0 on the request packet received in the >> >> SERVER,but it is 0 from the one originated on the client. willl it be >> >> the root cause? >> > >> > Which addresses are you talking about, and what do you mean by the LG bit? >> > >> > Is your linux 'router' just routing (ie IP forwarding) or is it doing NAT? >> > If it is changing the IP addresses then the addresses inside some SCTP >> > chunks also need changing. >> > >> > David >> > >>
Re: Problem on SCTP
On Tue, Jan 10, 2017 at 12:31:01AM +0800, Sun Paul wrote: > what kind of information do you need? the whole INIT packet? > That would be ideal. > On Mon, Jan 9, 2017 at 8:25 PM, Neil Horman wrote: > > On Mon, Jan 09, 2017 at 06:00:36PM +0800, Sun Paul wrote: > >> Hi > >> > >> the linux router just change the destination, so it can arrive on the > >> the SERVER. > >> > > Please post the relevant snippets from the client and server tcpdump > > operations > > > > Neil > > > >> On Mon, Jan 9, 2017 at 5:51 PM, David Laight > >> wrote: > >> > From: Sun Paul > >> >> Sent: 09 January 2017 02:08 > >> > > >> >> >> I am setting up a lab where the SCTP traffics from client is passing > >> >> >> through a linux router before reaching to the SCTP server running > >> >> >> LKSCTP. > >> >> >> > >> >> >> The linux router did not change the source address of the client, so > >> >> >> when it arrived to the SCTP server, the source address is the > >> >> >> oriingal > >> >> >> one. > >> >> > >> >> the INIT chunk arrive on the SERVER, but then no response. the > >> >> application that using in SERVER is the same as the other test. > >> >> > >> >> I noticed one thing in Ethernet frame of the incoming packet on the > >> >> SERVER compared to the one captured from the client is the LG bit on > >> >> the source address. > >> >> > >> >> The LG bit is set to 0 on the request packet received in the > >> >> SERVER,but it is 0 from the one originated on the client. willl it be > >> >> the root cause? > >> > > >> > Which addresses are you talking about, and what do you mean by the LG > >> > bit? > >> > > >> > Is your linux 'router' just routing (ie IP forwarding) or is it doing > >> > NAT? > >> > If it is changing the IP addresses then the addresses inside some SCTP > >> > chunks also need changing. > >> > > >> > David > >> > > >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-sctp" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
Re: Problem on SCTP
Packet received (From client) == No. Time SourceSPort Destination Protocol DPort Length Info DSCP 1 2017-01-06 08:52:49.662142192.168.206.8350001 192.168.206.65SCTP 3868 98 INIT CS0 Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662142000 seconds [Time delta from previous captured frame: 0.0 seconds] [Time delta from previous displayed frame: 0.0 seconds] [Time since reference or first frame: 0.0 seconds] Frame Number: 1 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: Vmware_81:41:6b (00:50:56:81:41:6b) Destination: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: RealtekU_54:81:87 (52:54:00:54:81:87) Address: RealtekU_54:81:87 (52:54:00:54:81:87) ..1. = LG bit: Locally administered address (this is NOT the factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 64 Protocol: SCTP (132) Header checksum: 0x1c3e [validation disabled] [Good: False] [Bad: False] Source: 192.168.206.83 Destination: 192.168.206.65 [Source GeoIP: Unknown] [Destination GeoIP: Unknown] Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst Port: 3868 (3868) Source port: 50001 Destination port: 3868 Verification tag: 0x [Assocation index: 0] Checksum: 0xbaea49e5 (not verified) INIT chunk (Outbound streams: 3000, inbound streams: 3000) Chunk type: INIT (1) 0... = Bit: Stop processing of the packet .0.. = Bit: Do not report Chunk flags: 0x00 Chunk length: 52 Initiate tag: 0xe79f40cb Advertised receiver window credit (a_rwnd): 62464 Number of outbound streams: 3000 Number of inbound streams: 3000 Initial TSN: 176990880 IPv4 address parameter (Address: 192.168.206.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.206.83 IPv4 address parameter (Address: 192.168.1.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.1.83 Supported address types parameter (Supported types: IPv6, IPv4) Parameter type: Supported address types (0x000c) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 Supported address type: IPv6 address (6) Supported address type: IPv4 address (5) ECN parameter Parameter type: ECN (0x8000) 1... = Bit: Skip parameter and continue processing of the chunk .0.. = Bit: Do not report Parameter length: 4 Forward TSN supported parameter Parameter type: Forward TSN supported (0xc000) 1... = Bit: Skip parameter and continue processing of the chunk .1.. = Bit: Do report Parameter length: 4 On Tue, Jan 10, 2017 at 3:18 AM, Neil Horman wrote: > On Tue, Jan 10, 2017 at 12:31:01AM +0800, Sun Paul wrote: >> what kind of information do you need? the whole
Re: Problem on SCTP
Packet to SERVER No. Time SourceSPort Destination Protocol DPort Length Info DSCP 2 2017-01-06 08:52:49.662321192.168.206.8350001 192.168.206.66SCTP 3868 98 INIT CS0 Frame 2: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) Encapsulation type: Ethernet (1) Arrival Time: Jan 6, 2017 16:52:49.662321000 Malay Peninsula Standard Time [Time shift for this packet: 0.0 seconds] Epoch Time: 1483692769.662321000 seconds [Time delta from previous captured frame: 0.000179000 seconds] [Time delta from previous displayed frame: 0.000179000 seconds] [Time since reference or first frame: 0.000179000 seconds] Frame Number: 2 Frame Length: 98 bytes (784 bits) Capture Length: 98 bytes (784 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:ethertype:ip:sctp] Ethernet II, Src: Vmware_81:41:6b (00:50:56:81:41:6b), Dst: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Destination: Vmware_81:a6:a3 (00:50:56:81:a6:a3) Address: Vmware_81:a6:a3 (00:50:56:81:a6:a3) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Source: Vmware_81:41:6b (00:50:56:81:41:6b) Address: Vmware_81:41:6b (00:50:56:81:41:6b) ..0. = LG bit: Globally unique address (factory default) ...0 = IG bit: Individual address (unicast) Type: IPv4 (0x0800) Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.66 0100 = Version: 4 0101 = Header Length: 20 bytes (5) Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) 00.. = Differentiated Services Codepoint: Default (0) ..10 = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) Total Length: 84 Identification: 0x (0) Flags: 0x02 (Don't Fragment) 0... = Reserved bit: Not set .1.. = Don't fragment: Set ..0. = More fragments: Not set Fragment offset: 0 Time to live: 63 Protocol: SCTP (132) Header checksum: 0x1d3d [validation disabled] [Good: False] [Bad: False] Source: 192.168.206.83 Destination: 192.168.206.66 [Source GeoIP: Unknown] [Destination GeoIP: Unknown] Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst Port: 3868 (3868) Source port: 50001 Destination port: 3868 Verification tag: 0x [Assocation index: 0] Checksum: 0xa9a86d3f (not verified) INIT chunk (Outbound streams: 3000, inbound streams: 3000) Chunk type: INIT (1) 0... = Bit: Stop processing of the packet .0.. = Bit: Do not report Chunk flags: 0x00 Chunk length: 52 Initiate tag: 0xe79f40cb Advertised receiver window credit (a_rwnd): 62464 Number of outbound streams: 3000 Number of inbound streams: 3000 Initial TSN: 176990880 IPv4 address parameter (Address: 192.168.206.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.206.83 IPv4 address parameter (Address: 192.168.1.83) Parameter type: IPv4 address (0x0005) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 IP Version 4 address: 192.168.1.83 Supported address types parameter (Supported types: IPv6, IPv4) Parameter type: Supported address types (0x000c) 0... = Bit: Stop processing of chunk .0.. = Bit: Do not report Parameter length: 8 Supported address type: IPv6 address (6) Supported address type: IPv4 address (5) ECN parameter Parameter type: ECN (0x8000) 1... = Bit: Skip parameter and continue processing of the chunk .0.. = Bit: Do not report Parameter length: 4 Forward TSN supported parameter Parameter type: Forward TSN supported (0xc000) 1... = Bit: Skip parameter and continue processing of the chunk .1.. = Bit: Do report Parameter length: 4 On Tue, Jan 10, 2017 at 9:30 AM, Sun Paul wrote: > Packet received (From client) > == > > No. Time SourceSPort > Destination Protocol
Re: Problem on SCTP
On Tue, Jan 10, 2017 at 09:30:39AM +0800, Sun Paul wrote: > Packet received (From client) > == > > No. Time SourceSPort > Destination Protocol DPort Length Info > DSCP > 1 2017-01-06 08:52:49.662142192.168.206.8350001 > 192.168.206.65SCTP 3868 98 INIT > CS0 > > Frame 1: 98 bytes on wire (784 bits), 98 bytes captured (784 bits) > Encapsulation type: Ethernet (1) > Arrival Time: Jan 6, 2017 16:52:49.662142000 Malay Peninsula Standard > Time > [Time shift for this packet: 0.0 seconds] > Epoch Time: 1483692769.662142000 seconds > [Time delta from previous captured frame: 0.0 seconds] > [Time delta from previous displayed frame: 0.0 seconds] > [Time since reference or first frame: 0.0 seconds] > Frame Number: 1 > Frame Length: 98 bytes (784 bits) > Capture Length: 98 bytes (784 bits) > [Frame is marked: False] > [Frame is ignored: False] > [Protocols in frame: eth:ethertype:ip:sctp] > Ethernet II, Src: RealtekU_54:81:87 (52:54:00:54:81:87), Dst: > Vmware_81:41:6b (00:50:56:81:41:6b) > Destination: Vmware_81:41:6b (00:50:56:81:41:6b) > Address: Vmware_81:41:6b (00:50:56:81:41:6b) > ..0. = LG bit: Globally unique > address (factory default) > ...0 = IG bit: Individual address (unicast) > Source: RealtekU_54:81:87 (52:54:00:54:81:87) > Address: RealtekU_54:81:87 (52:54:00:54:81:87) > ..1. = LG bit: Locally administered > address (this is NOT the factory default) > ...0 = IG bit: Individual address (unicast) > Type: IPv4 (0x0800) > Internet Protocol Version 4, Src: 192.168.206.83, Dst: 192.168.206.65 > 0100 = Version: 4 > 0101 = Header Length: 20 bytes (5) > Differentiated Services Field: 0x02 (DSCP: CS0, ECN: ECT(0)) > 00.. = Differentiated Services Codepoint: Default (0) > ..10 = Explicit Congestion Notification: ECN-Capable > Transport codepoint '10' (2) > Total Length: 84 > Identification: 0x (0) > Flags: 0x02 (Don't Fragment) > 0... = Reserved bit: Not set > .1.. = Don't fragment: Set > ..0. = More fragments: Not set > Fragment offset: 0 > Time to live: 64 > Protocol: SCTP (132) > Header checksum: 0x1c3e [validation disabled] > [Good: False] > [Bad: False] > Source: 192.168.206.83 > Destination: 192.168.206.65 > [Source GeoIP: Unknown] > [Destination GeoIP: Unknown] > Stream Control Transmission Protocol, Src Port: 50001 (50001), Dst > Port: 3868 (3868) > Source port: 50001 > Destination port: 3868 > Verification tag: 0x > [Assocation index: 0] > Checksum: 0xbaea49e5 (not verified) > INIT chunk (Outbound streams: 3000, inbound streams: 3000) > Chunk type: INIT (1) > 0... = Bit: Stop processing of the packet > .0.. = Bit: Do not report > Chunk flags: 0x00 > Chunk length: 52 > Initiate tag: 0xe79f40cb > Advertised receiver window credit (a_rwnd): 62464 > Number of outbound streams: 3000 > Number of inbound streams: 3000 > Initial TSN: 176990880 > IPv4 address parameter (Address: 192.168.206.83) > Parameter type: IPv4 address (0x0005) > 0... = Bit: Stop processing of chunk > .0.. = Bit: Do not report > Parameter length: 8 > IP Version 4 address: 192.168.206.83 > IPv4 address parameter (Address: 192.168.1.83) > Parameter type: IPv4 address (0x0005) > 0... = Bit: Stop processing of chunk > .0.. = Bit: Do not report > Parameter length: 8 > IP Version 4 address: 192.168.1.83 > Supported address types parameter (Supported types: IPv6, IPv4) > Parameter type: Supported address types (0x000c) > 0... = Bit: Stop processing of chunk > .0.. = Bit: Do not report > Parameter length: 8 > Supported address type: IPv6 address (6) > Supported address type: IPv4 address (5) > ECN parameter > Parameter type: ECN (0x8000) > 1... = Bit: Skip parameter and continue > processing of the chunk > .0.. = Bit: Do not report > Parameter length: 4 > Forward TSN supported parameter > Parameter type: Forward TSN supported (0xc000) > 1... = Bit: Skip parameter and continue >