RE: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk
> -Original Message- > From: Felipe Balbi [mailto:felipe.ba...@linux.intel.com] > Sent: Monday, March 14, 2016 12:26 PM > To: Rajesh Bhagat <rajesh.bha...@nxp.com> > Cc: gre...@linuxfoundation.org; linux-...@vger.kernel.org; linux- > ker...@vger.kernel.org; linux-o...@vger.kernel.org; Sriram Dash > <sriram.d...@nxp.com>; Rajesh Bhagat <rajesh.bha...@nxp.com> > Subject: Re: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk > > > Hi, > Hello Felipe, Thanks for the comments. > Rajesh Bhagat <rajesh.bha...@nxp.com> writes: > > [ text/plain ] > > Some freescale QorIQ platforms require to disable receiver detection > > in P3 for correct detection of USB devices. If > > GUSB3PIPECTL(DISRXDETINP3) is set, Core will change PHY power state to > > P2 and then perform receiver detection. After receiver detection, Core > > will change PHY power state to P3. Same quirk would be added in dts file in > > future > patches. > > > > Signed-off-by: Sriram Dash <sriram.d...@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com> > > --- > > drivers/usb/dwc3/core.c |6 ++ > > drivers/usb/dwc3/core.h |2 ++ > > drivers/usb/dwc3/platform_data.h |1 + > > 3 files changed, 9 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > > de5e01f..b2f2b08 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -446,6 +446,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > > if (dwc->u2ss_inp3_quirk) > > reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; > > > > + if (dwc->dis_rxdet_inp3_quirk) > > + reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3; > > + > > if (dwc->req_p1p2p3_quirk) > > reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; > > > > @@ -903,6 +906,8 @@ static int dwc3_probe(struct platform_device *pdev) > > "snps,u2exit_lfps_quirk"); > > dwc->u2ss_inp3_quirk = device_property_read_bool(dev, > > "snps,u2ss_inp3_quirk"); > > + dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, > > + "snps,dis_rxdet_inp3_quirk"); > > not documented under Documentation/devicetree/bindings/usb/dwc3.txt. > Will take care in v2. > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index > > e4f8b90..41cc22c 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -193,6 +193,7 @@ > > /* Global USB3 PIPE Control Register */ > > #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) > > #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) > > +#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) > > #define DWC3_GUSB3PIPECTL_REQP1P2P3(1 << 24) > > #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) > > #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK > DWC3_GUSB3PIPECTL_DEP1P2P3(7) > > @@ -873,6 +874,7 @@ struct dwc3 { > > > > unsignedtx_de_emphasis_quirk:1; > > unsignedtx_de_emphasis:2; > > + unsigneddis_rxdet_inp3_quirk:1; > > _must_ be sorted alphabetically and you _must_ update the kernel doc above > this > structure. > Will take care in v2. > > }; > > > > /* > > -- > > */ diff --git a/drivers/usb/dwc3/platform_data.h > > b/drivers/usb/dwc3/platform_data.h > > index 2bb4d3a..9df1dfb 100644 > > --- a/drivers/usb/dwc3/platform_data.h > > +++ b/drivers/usb/dwc3/platform_data.h > > @@ -46,6 +46,7 @@ struct dwc3_platform_data { > > > > unsigned tx_de_emphasis_quirk:1; > > unsigned tx_de_emphasis:2; > > + unsigned dis_rxdet_inp3_quirk:1; > > likewise. > Will take care in v2. > -- > balbi
RE: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk
> -Original Message- > From: Felipe Balbi [mailto:felipe.ba...@linux.intel.com] > Sent: Monday, March 14, 2016 12:26 PM > To: Rajesh Bhagat > Cc: gre...@linuxfoundation.org; linux-...@vger.kernel.org; linux- > ker...@vger.kernel.org; linux-o...@vger.kernel.org; Sriram Dash > ; Rajesh Bhagat > Subject: Re: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk > > > Hi, > Hello Felipe, Thanks for the comments. > Rajesh Bhagat writes: > > [ text/plain ] > > Some freescale QorIQ platforms require to disable receiver detection > > in P3 for correct detection of USB devices. If > > GUSB3PIPECTL(DISRXDETINP3) is set, Core will change PHY power state to > > P2 and then perform receiver detection. After receiver detection, Core > > will change PHY power state to P3. Same quirk would be added in dts file in > > future > patches. > > > > Signed-off-by: Sriram Dash > > Signed-off-by: Rajesh Bhagat > > --- > > drivers/usb/dwc3/core.c |6 ++ > > drivers/usb/dwc3/core.h |2 ++ > > drivers/usb/dwc3/platform_data.h |1 + > > 3 files changed, 9 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > > de5e01f..b2f2b08 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -446,6 +446,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > > if (dwc->u2ss_inp3_quirk) > > reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; > > > > + if (dwc->dis_rxdet_inp3_quirk) > > + reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3; > > + > > if (dwc->req_p1p2p3_quirk) > > reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; > > > > @@ -903,6 +906,8 @@ static int dwc3_probe(struct platform_device *pdev) > > "snps,u2exit_lfps_quirk"); > > dwc->u2ss_inp3_quirk = device_property_read_bool(dev, > > "snps,u2ss_inp3_quirk"); > > + dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, > > + "snps,dis_rxdet_inp3_quirk"); > > not documented under Documentation/devicetree/bindings/usb/dwc3.txt. > Will take care in v2. > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index > > e4f8b90..41cc22c 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -193,6 +193,7 @@ > > /* Global USB3 PIPE Control Register */ > > #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) > > #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) > > +#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) > > #define DWC3_GUSB3PIPECTL_REQP1P2P3(1 << 24) > > #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) > > #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK > DWC3_GUSB3PIPECTL_DEP1P2P3(7) > > @@ -873,6 +874,7 @@ struct dwc3 { > > > > unsignedtx_de_emphasis_quirk:1; > > unsignedtx_de_emphasis:2; > > + unsigneddis_rxdet_inp3_quirk:1; > > _must_ be sorted alphabetically and you _must_ update the kernel doc above > this > structure. > Will take care in v2. > > }; > > > > /* > > -- > > */ diff --git a/drivers/usb/dwc3/platform_data.h > > b/drivers/usb/dwc3/platform_data.h > > index 2bb4d3a..9df1dfb 100644 > > --- a/drivers/usb/dwc3/platform_data.h > > +++ b/drivers/usb/dwc3/platform_data.h > > @@ -46,6 +46,7 @@ struct dwc3_platform_data { > > > > unsigned tx_de_emphasis_quirk:1; > > unsigned tx_de_emphasis:2; > > + unsigned dis_rxdet_inp3_quirk:1; > > likewise. > Will take care in v2. > -- > balbi
Re: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk
Hi, Rajesh Bhagatwrites: > [ text/plain ] > Some freescale QorIQ platforms require to disable receiver detection > in P3 for correct detection of USB devices. If GUSB3PIPECTL(DISRXDETINP3) > is set, Core will change PHY power state to P2 and then perform receiver > detection. After receiver detection, Core will change PHY power state to > P3. Same quirk would be added in dts file in future patches. > > Signed-off-by: Sriram Dash > Signed-off-by: Rajesh Bhagat > --- > drivers/usb/dwc3/core.c |6 ++ > drivers/usb/dwc3/core.h |2 ++ > drivers/usb/dwc3/platform_data.h |1 + > 3 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index de5e01f..b2f2b08 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -446,6 +446,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > if (dwc->u2ss_inp3_quirk) > reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; > > + if (dwc->dis_rxdet_inp3_quirk) > + reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3; > + > if (dwc->req_p1p2p3_quirk) > reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; > > @@ -903,6 +906,8 @@ static int dwc3_probe(struct platform_device *pdev) > "snps,u2exit_lfps_quirk"); > dwc->u2ss_inp3_quirk = device_property_read_bool(dev, > "snps,u2ss_inp3_quirk"); > + dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, > + "snps,dis_rxdet_inp3_quirk"); not documented under Documentation/devicetree/bindings/usb/dwc3.txt. > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index e4f8b90..41cc22c 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -193,6 +193,7 @@ > /* Global USB3 PIPE Control Register */ > #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) > #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) > +#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) > #define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) > #define DWC3_GUSB3PIPECTL_DEP1P2P3(n)((n) << 19) > #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7) > @@ -873,6 +874,7 @@ struct dwc3 { > > unsignedtx_de_emphasis_quirk:1; > unsignedtx_de_emphasis:2; > + unsigneddis_rxdet_inp3_quirk:1; _must_ be sorted alphabetically and you _must_ update the kernel doc above this structure. > }; > > /* > -- */ > diff --git a/drivers/usb/dwc3/platform_data.h > b/drivers/usb/dwc3/platform_data.h > index 2bb4d3a..9df1dfb 100644 > --- a/drivers/usb/dwc3/platform_data.h > +++ b/drivers/usb/dwc3/platform_data.h > @@ -46,6 +46,7 @@ struct dwc3_platform_data { > > unsigned tx_de_emphasis_quirk:1; > unsigned tx_de_emphasis:2; > + unsigned dis_rxdet_inp3_quirk:1; likewise. -- balbi signature.asc Description: PGP signature
Re: [PATCH] usb: dwc3: add disable receiver detection in P3 quirk
Hi, Rajesh Bhagat writes: > [ text/plain ] > Some freescale QorIQ platforms require to disable receiver detection > in P3 for correct detection of USB devices. If GUSB3PIPECTL(DISRXDETINP3) > is set, Core will change PHY power state to P2 and then perform receiver > detection. After receiver detection, Core will change PHY power state to > P3. Same quirk would be added in dts file in future patches. > > Signed-off-by: Sriram Dash > Signed-off-by: Rajesh Bhagat > --- > drivers/usb/dwc3/core.c |6 ++ > drivers/usb/dwc3/core.h |2 ++ > drivers/usb/dwc3/platform_data.h |1 + > 3 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index de5e01f..b2f2b08 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -446,6 +446,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > if (dwc->u2ss_inp3_quirk) > reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; > > + if (dwc->dis_rxdet_inp3_quirk) > + reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3; > + > if (dwc->req_p1p2p3_quirk) > reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; > > @@ -903,6 +906,8 @@ static int dwc3_probe(struct platform_device *pdev) > "snps,u2exit_lfps_quirk"); > dwc->u2ss_inp3_quirk = device_property_read_bool(dev, > "snps,u2ss_inp3_quirk"); > + dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, > + "snps,dis_rxdet_inp3_quirk"); not documented under Documentation/devicetree/bindings/usb/dwc3.txt. > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index e4f8b90..41cc22c 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -193,6 +193,7 @@ > /* Global USB3 PIPE Control Register */ > #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) > #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) > +#define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) > #define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) > #define DWC3_GUSB3PIPECTL_DEP1P2P3(n)((n) << 19) > #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7) > @@ -873,6 +874,7 @@ struct dwc3 { > > unsignedtx_de_emphasis_quirk:1; > unsignedtx_de_emphasis:2; > + unsigneddis_rxdet_inp3_quirk:1; _must_ be sorted alphabetically and you _must_ update the kernel doc above this structure. > }; > > /* > -- */ > diff --git a/drivers/usb/dwc3/platform_data.h > b/drivers/usb/dwc3/platform_data.h > index 2bb4d3a..9df1dfb 100644 > --- a/drivers/usb/dwc3/platform_data.h > +++ b/drivers/usb/dwc3/platform_data.h > @@ -46,6 +46,7 @@ struct dwc3_platform_data { > > unsigned tx_de_emphasis_quirk:1; > unsigned tx_de_emphasis:2; > + unsigned dis_rxdet_inp3_quirk:1; likewise. -- balbi signature.asc Description: PGP signature