Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
On Saturday 08 September 2007, Sergei Shtylyov wrote: > Hello, I wrote: > Sergei Shtylyov wrote: > > >The patch was 4/4 of course. :-< > > Probably I was too esctatic about the code. ;-) > > Or rarher me. :-) > > >> The Marvell bridge chips used on HighPoint SATA cards do not seem to > >> support > >> the MWDMA modes (at least that caould be seen in their so-called > >> drivers :-), > >> so the driver needs to account for this -- to achieve this: > > >> - add mdma_filter() method from the original patch by Bartlomiej > >> Zolnierkewicz > >> with his consent, also adding the method callout to ide_rate_filter(); > > >> - installed the method for all chips to only return empty mask if a > >> SATA drive > >> is detected onHPT372{AN]/374 chips... > > >> Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> I pushed all your bugfix patches that were in IDE tree to Linus so (after "the pull") please resync and resend the outstanding patches. > >> --- > >> This patch against the current Linus' tree and unfortunately I was > >> able to only > >> compile test it since that tree gives MODPOST warning and dies early > >> on bootup. > >> Will hopefully try to test if/when I have time... :-) > > And it was still the same -- I'd bisected if I had time... :( > >> Index: linux-2.6/drivers/ide/pci/hpt366.c > >> === > >> --- linux-2.6.orig/drivers/ide/pci/hpt366.c > >> +++ linux-2.6/drivers/ide/pci/hpt366.c > >> @@ -1,5 +1,5 @@ > >> /* > >> - * linux/drivers/ide/pci/hpt366.cVersion 1.12Aug 25, 2007 > >> + * linux/drivers/ide/pci/hpt366.cVersion 1.13Aug 22, 2007 > > >Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ > > Hehe, thanks. Those versions turned to be quite PITA a to keep. I think we should get rid of these "old-style" versions and convert all IDE host drivers to use "new-style" versions (DRV_VERSION define + MODULE_VERSION(DRV_VERSION)). Any volunteers? :) Thanks, Bart - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
On Saturday 08 September 2007, Sergei Shtylyov wrote: Hello, I wrote: Sergei Shtylyov wrote: The patch was 4/4 of course. :- Probably I was too esctatic about the code. ;-) Or rarher me. :-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov [EMAIL PROTECTED] I pushed all your bugfix patches that were in IDE tree to Linus so (after the pull) please resync and resend the outstanding patches. --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) And it was still the same -- I'd bisected if I had time... :( Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.cVersion 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.cVersion 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ Hehe, thanks. Those versions turned to be quite PITA a to keep. I think we should get rid of these old-style versions and convert all IDE host drivers to use new-style versions (DRV_VERSION define + MODULE_VERSION(DRV_VERSION)). Any volunteers? :) Thanks, Bart - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
Hello, I wrote: Sergei Shtylyov wrote: The patch was 4/4 of course. :-< Probably I was too esctatic about the code. ;-) Or rarher me. :-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) And it was still the same -- I'd bisected if I had time... Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.cVersion 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.cVersion 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ Hehe, thanks. Those versions turned to be quite PITA a to keep. MBR, Sergei - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
Hello, I wrote: Sergei Shtylyov wrote: The patch was 4/4 of course. :- Probably I was too esctatic about the code. ;-) Or rarher me. :-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov [EMAIL PROTECTED] --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) And it was still the same -- I'd bisected if I had time... Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.cVersion 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.cVersion 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ Hehe, thanks. Those versions turned to be quite PITA a to keep. MBR, Sergei - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
On Sunday 02 September 2007, Sergei Shtylyov wrote: > Hello, I wrote: > > The patch was 4/4 of course. :-< > Probably I was too esctatic about the code. ;-) > > > The Marvell bridge chips used on HighPoint SATA cards do not seem to support > > the MWDMA modes (at least that caould be seen in their so-called drivers > > :-), > > so the driver needs to account for this -- to achieve this: > > > - add mdma_filter() method from the original patch by Bartlomiej > > Zolnierkewicz > > with his consent, also adding the method callout to ide_rate_filter(); > > > - installed the method for all chips to only return empty mask if a SATA > > drive > > is detected onHPT372{AN]/374 chips... > > > Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> > > > --- > > This patch against the current Linus' tree and unfortunately I was able to > > only > > compile test it since that tree gives MODPOST warning and dies early on > > bootup. > > Will hopefully try to test if/when I have time... :-) > > > Index: linux-2.6/drivers/ide/pci/hpt366.c > > === > > --- linux-2.6.orig/drivers/ide/pci/hpt366.c > > +++ linux-2.6/drivers/ide/pci/hpt366.c > > @@ -1,5 +1,5 @@ > > /* > > - * linux/drivers/ide/pci/hpt366.c Version 1.12Aug 25, 2007 > > + * linux/drivers/ide/pci/hpt366.c Version 1.13Aug 22, 2007 > > Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ and we have ATA_MWDMA2 define in _vanilla_ kernel now :) Bart - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
On Sunday 02 September 2007, Sergei Shtylyov wrote: Hello, I wrote: The patch was 4/4 of course. :- Probably I was too esctatic about the code. ;-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov [EMAIL PROTECTED] --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ and we have ATA_MWDMA2 define in _vanilla_ kernel now :) Bart - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
Hello, I wrote: The patch was 4/4 of course. :-< Probably I was too esctatic about the code. ;-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ MBR, Sergei - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 2/4] hpt366: MWDMA filter for SATA cards
Hello, I wrote: The patch was 4/4 of course. :- Probably I was too esctatic about the code. ;-) The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkewicz with his consent, also adding the method callout to ide_rate_filter(); - installed the method for all chips to only return empty mask if a SATA drive is detected onHPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov [EMAIL PROTECTED] --- This patch against the current Linus' tree and unfortunately I was able to only compile test it since that tree gives MODPOST warning and dies early on bootup. Will hopefully try to test if/when I have time... :-) Index: linux-2.6/drivers/ide/pci/hpt366.c === --- linux-2.6.orig/drivers/ide/pci/hpt366.c +++ linux-2.6/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.12Aug 25, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.13Aug 22, 2007 Errr... and version shuold Aug 02 -- thought I've fixed that. :-/ MBR, Sergei - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/