Re: [PATCH v10 12/13] drm/mediatek: update DSI sub driver flow for sending commands to panel
Hi CK, On Wed, 2016-11-30 at 15:58 +0800, CK Hu wrote: > Hi, YT: > > some comments inline. > > On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote: > > This patch update enable/disable flow of DSI module. > > Original flow works on there is a bridge chip: DSI -> bridge -> panel. > > In this case: DSI -> panel, the DSI sub driver flow should be updated. > > We need to initialize DSI first so that we can send commands to panel. > > > > Signed-off-by: shaoming chen > > Signed-off-by: YT Shen > > --- > > drivers/gpu/drm/mediatek/mtk_dsi.c | 101 > > + > > 1 file changed, 80 insertions(+), 21 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > > b/drivers/gpu/drm/mediatek/mtk_dsi.c > > index ded4202..0569f2e 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > > @@ -126,6 +126,10 @@ > > #define CLK_HS_POST(0xff << 8) > > #define CLK_HS_EXIT(0xff << 16) > > > > +#define DSI_VM_CMD_CON 0x130 > > +#define VM_CMD_EN BIT(0) > > +#define TS_VFP_EN BIT(5) > > + > > #define DSI_CMDQ0 0x180 > > #define CONFIG (0xff << 0) > > #define SHORT_PACKET 0 > > @@ -249,7 +253,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) > > * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi. > > * we set mipi_ratio is 1.05. > > */ > > - dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10); > > + dsi->data_rate = dsi->vm.pixelclock * 12 * 21; > > + dsi->data_rate /= (dsi->lanes * 1000 * 10); > > This looks like a bug fix that use lanes to calculate data rate. This part add support when dsi->lanes != 4. > > > + DRM_DEBUG_DRIVER("set mipitx's data rate: %dMHz\n", dsi->data_rate); > > > > ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 100); > > if (ret < 0) { > > @@ -333,16 +339,23 @@ static void mtk_dsi_set_mode(struct mtk_dsi *dsi) > > u32 vid_mode = CMD_MODE; > > > > if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { > > - vid_mode = SYNC_PULSE_MODE; > > - > > - if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) && > > - !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) > > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) > > vid_mode = BURST_MODE; > > + else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) > > + vid_mode = SYNC_PULSE_MODE; > > + else > > + vid_mode = SYNC_EVENT_MODE; > > } > > > > writel(vid_mode, dsi->regs + DSI_MODE_CTRL); > > } > > > > +static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi) > > +{ > > + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, VM_CMD_EN, VM_CMD_EN); > > + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, TS_VFP_EN, TS_VFP_EN); > > +} > > + > > static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi) > > { > > struct videomode *vm = &dsi->vm; > > @@ -480,6 +493,16 @@ static void mtk_dsi_start(struct mtk_dsi *dsi) > > writel(1, dsi->regs + DSI_START); > > } > > > > +static void mtk_dsi_stop(struct mtk_dsi *dsi) > > +{ > > + writel(0, dsi->regs + DSI_START); > > +} > > + > > +static void mtk_dsi_set_cmd_mode(struct mtk_dsi *dsi) > > +{ > > + writel(CMD_MODE, dsi->regs + DSI_MODE_CTRL); > > +} > > + > > static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi) > > { > > u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG; > > @@ -538,6 +561,19 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id) > > return IRQ_HANDLED; > > } > > > > +static s32 mtk_dsi_switch_to_cmd_mode(struct mtk_dsi *dsi, u8 irq_flag, > > u32 t) > > +{ > > + mtk_dsi_irq_data_clear(dsi, irq_flag); > > + mtk_dsi_set_cmd_mode(dsi); > > + > > + if (!mtk_dsi_wait_for_irq_done(dsi, irq_flag, t)) { > > + DRM_ERROR("failed to switch cmd mode\n"); > > + return -ETIME; > > + } else { > > + return 0; > > + } > > +} > > + > > static void mtk_dsi_poweroff(struct mtk_dsi *dsi) > > { > > if (WARN_ON(dsi->refcount == 0)) > > @@ -546,11 +582,6 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) > > if (--dsi->refcount != 0) > > return; > > > > - mtk_dsi_lane0_ulp_mode_enter(dsi); > > - mtk_dsi_clk_ulp_mode_enter(dsi); > > - > > - mtk_dsi_disable(dsi); > > - > > clk_disable_unprepare(dsi->engine_clk); > > clk_disable_unprepare(dsi->digital_clk); > > > > @@ -564,13 +595,6 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi) > > if (dsi->enabled) > > return; > > > > - if (dsi->panel) { > > - if (drm_panel_prepare(dsi->panel)) { > > - DRM_ERROR("failed to setup the panel\n"); > > - return; > > - } > > - } > > - > > ret = mtk_dsi_poweron(dsi); > > if (ret < 0) { > >
Re: [PATCH v10 12/13] drm/mediatek: update DSI sub driver flow for sending commands to panel
Hi, YT: some comments inline. On Fri, 2016-11-25 at 18:34 +0800, YT Shen wrote: > This patch update enable/disable flow of DSI module. > Original flow works on there is a bridge chip: DSI -> bridge -> panel. > In this case: DSI -> panel, the DSI sub driver flow should be updated. > We need to initialize DSI first so that we can send commands to panel. > > Signed-off-by: shaoming chen > Signed-off-by: YT Shen > --- > drivers/gpu/drm/mediatek/mtk_dsi.c | 101 > + > 1 file changed, 80 insertions(+), 21 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > b/drivers/gpu/drm/mediatek/mtk_dsi.c > index ded4202..0569f2e 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > @@ -126,6 +126,10 @@ > #define CLK_HS_POST (0xff << 8) > #define CLK_HS_EXIT (0xff << 16) > > +#define DSI_VM_CMD_CON 0x130 > +#define VM_CMD_ENBIT(0) > +#define TS_VFP_ENBIT(5) > + > #define DSI_CMDQ00x180 > #define CONFIG (0xff << 0) > #define SHORT_PACKET 0 > @@ -249,7 +253,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) >* mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi. >* we set mipi_ratio is 1.05. >*/ > - dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10); > + dsi->data_rate = dsi->vm.pixelclock * 12 * 21; > + dsi->data_rate /= (dsi->lanes * 1000 * 10); This looks like a bug fix that use lanes to calculate data rate. > + DRM_DEBUG_DRIVER("set mipitx's data rate: %dMHz\n", dsi->data_rate); > > ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 100); > if (ret < 0) { > @@ -333,16 +339,23 @@ static void mtk_dsi_set_mode(struct mtk_dsi *dsi) > u32 vid_mode = CMD_MODE; > > if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { > - vid_mode = SYNC_PULSE_MODE; > - > - if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) && > - !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) > vid_mode = BURST_MODE; > + else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) > + vid_mode = SYNC_PULSE_MODE; > + else > + vid_mode = SYNC_EVENT_MODE; > } > > writel(vid_mode, dsi->regs + DSI_MODE_CTRL); > } > > +static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi) > +{ > + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, VM_CMD_EN, VM_CMD_EN); > + mtk_dsi_mask(dsi, DSI_VM_CMD_CON, TS_VFP_EN, TS_VFP_EN); > +} > + > static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi) > { > struct videomode *vm = &dsi->vm; > @@ -480,6 +493,16 @@ static void mtk_dsi_start(struct mtk_dsi *dsi) > writel(1, dsi->regs + DSI_START); > } > > +static void mtk_dsi_stop(struct mtk_dsi *dsi) > +{ > + writel(0, dsi->regs + DSI_START); > +} > + > +static void mtk_dsi_set_cmd_mode(struct mtk_dsi *dsi) > +{ > + writel(CMD_MODE, dsi->regs + DSI_MODE_CTRL); > +} > + > static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi) > { > u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG; > @@ -538,6 +561,19 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id) > return IRQ_HANDLED; > } > > +static s32 mtk_dsi_switch_to_cmd_mode(struct mtk_dsi *dsi, u8 irq_flag, u32 > t) > +{ > + mtk_dsi_irq_data_clear(dsi, irq_flag); > + mtk_dsi_set_cmd_mode(dsi); > + > + if (!mtk_dsi_wait_for_irq_done(dsi, irq_flag, t)) { > + DRM_ERROR("failed to switch cmd mode\n"); > + return -ETIME; > + } else { > + return 0; > + } > +} > + > static void mtk_dsi_poweroff(struct mtk_dsi *dsi) > { > if (WARN_ON(dsi->refcount == 0)) > @@ -546,11 +582,6 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) > if (--dsi->refcount != 0) > return; > > - mtk_dsi_lane0_ulp_mode_enter(dsi); > - mtk_dsi_clk_ulp_mode_enter(dsi); > - > - mtk_dsi_disable(dsi); > - > clk_disable_unprepare(dsi->engine_clk); > clk_disable_unprepare(dsi->digital_clk); > > @@ -564,13 +595,6 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi) > if (dsi->enabled) > return; > > - if (dsi->panel) { > - if (drm_panel_prepare(dsi->panel)) { > - DRM_ERROR("failed to setup the panel\n"); > - return; > - } > - } > - > ret = mtk_dsi_poweron(dsi); > if (ret < 0) { > DRM_ERROR("failed to power on dsi\n"); > @@ -578,21 +602,43 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi) > } > > mtk_dsi_rxtx_control(dsi); > + mtk_dsi_ps_control_vact(dsi); > + mtk_dsi_set_vm_cmd(dsi); Even though dsi does not directl