Re: [PATCH v2 00/49] PCI: Resource allocation cleanup for v4.3

2015-07-16 Thread Yinghai Lu
On Thu, Jul 16, 2015 at 6:51 PM, Wei Yang  wrote:
> Yinghai,
>
> Tested your latest for for-pci-v4.3-next branch, it works fine on my P8
> machine.

Thanks for testing.

>
> BTW, the SRIOV works fine too. Previously failure is based on my mistake, I
> have disabled SRIOV :-(

Good.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


Re: [PATCH v2 00/49] PCI: Resource allocation cleanup for v4.3

2015-07-16 Thread Wei Yang
Yinghai,

Tested your latest for for-pci-v4.3-next branch, it works fine on my P8
machine.

BTW, the SRIOV works fine too. Previously failure is based on my mistake, I
have disabled SRIOV :-(

On Tue, Jul 14, 2015 at 03:46:31PM -0700, Yinghai Lu wrote:
>Hi,
>
>After 5b28541552ef (PCI: Restrict 64-bit prefetchable bridge windows
>to 64-bit resources), we have several reports on resource allocation
>failure, and we try to fix the problem with resource clip, and get
>more problems.
>
>One is realloc fail with two graphics cards above 4G.
>One is from sparc that have problem with clip as we don't parse
>mem64 for it.
>
>Other report is about pci remove/rescan does not work on some setup
>when BIOS tend to allocate small bus size.
>
>This patchset enhance resource allocation to address those problems.
>1. optimize bus mmio alignment calculation.
>2. optimize bus mmio optional alignment calculation.
>3. add support for alt size to prefer small bus size to small bus alignment.
>   when we have small resource window on parent bridges.
>4. treat ROM bar as optional resource.
>5. during allocation, will pick up just fit resource.
>6. parse MEM64 for sparc and other system with OF.
>7. treat non-pref mmio64 if parent bridges are all pcie.
>8. restore old pref allocation logic if hostbridge does not support mmio64 
>really.
>9. don't realloc resource if device firmware does not support bar change.
>10. add pci=assign_pref_bars to clear and assign pref bars.
>11. don't clear resource when allocation fails.
>
>I put latest copy at:
>  git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git 
> for-pci-v4.3-next
>
>That is based on kind of v4.2-rc2.
>
>v2:
>- fix resource_disabled allocation from powerpc
>- other warnings that were found by Fengguang's build robot.
>- io port alignment clean up.
>- rebased to v4.2-rc2
>- better for two alt_size support.
>
>Thanks
>
>Yinghai
>
>Yinghai Lu (49):
>  PCI: Cleanup res_to_dev_res() printout for addon resources
>  PCI: Reuse res_to_dev_res in reassign_resources_sorted
>  PCI: Use correct align for optional only resources during sorting
>  PCI: Optimize bus align/size calculation during sizing
>  PCI: Optimize bus align/size calculation for optional during sizing
>  PCI: Don't add too much optional size for hotplug bridge mmio
>  PCI: Reorder resources list for must/optional resources
>  PCI: Remove duplicated code for resource sorting
>  PCI: Rename pdev_sort_resources to pdev_check_resources
>  PCI: Treat ROM resource as optional during realloc
>  PCI: Add debug printout during releasing partial assigned resources
>  PCI: Simplify res reference using in __assign_resourcs_sorted
>  PCI: Separate realloc list checking after allocation
>  PCI: Add __add_to_list()
>  PCI: Cache window alignment value
>  PCI: Check if resource is allocated before pci_assign
>  PCI: Separate out save_resources/restore_resource
>  PCI: Move comment to pci_need_to_release()
>  PCI: Separate must+optional assigning to another function
>  PCI: Skip must+optional if there is no optional addon
>  PCI: Move saved required resource list out of must+optional assigning
>  PCI: Add alt_size allocation support
>  PCI: Add support for more than two alt_size under same bridge
>  PCI: Better support for two alt_size
>  PCI: Don't add too much optional size for hotplug bridge io
>  PCI: Move ISA ioport align out of calculate_iosize
>  PCI: Unifiy calculate_size for io port and mmio
>  PCI: Allow optional only io resource must size to be 0
>  PCI: Unify skip_ioresource_align()
>  PCI: Kill macro checking for bus io port sizing
>  resources: Split out __allocate_resource()
>  resources: Make allocate_resource return just fit resource
>  PCI: Check pref compatible bit for mem64 resource of pcie device
>  PCI: Only treat non-pef mmio64 as pref if all bridges has MEM_64
>  PCI: Add has_mem64 for host_bridge
>  PCI: Only treat non-pef mmio64 as pref if host-bridge has_mem64
>  PCI: Restore pref mmio allocation logic for hostbridge without mmio64
>  sparc/PCI: Add mem64 resource parsing for root bus
>  sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in of parsing
>  powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in of parsing
>  of/PCI: Add IORESOURCE_MEM_64 for 64-bit resource
>  PCI: Treat optional as must in first try for bridge rescan
>  PCI: Get new realloc size for bridge for last try
>  PCI: Don't release sibiling bridge resources during hotplug
>  PCI: Don't release fixed resource for realloc
>  PCI: Set resource to FIXED for lsi devices
>  PCI, x86: Add pci=assign_pref_bars to re-allocate pref bars
>  PCI: Introduce resource_disabled()
>  PCI: Don't set flags to 0 when assign resource fail
>
> arch/alpha/kernel/pci.c   |2 +-
> arch/ia64/pci/pci.c   |4 +-
> arch/microblaze/pci/pci-common.c  |   23 +-
> arch/mn10300/unit-asb2305/pci-asb2305.c   |4 +-
> arch/mn10300/unit-asb2305/pci.c   |4 +-
> 

Re: [PATCH v2 00/49] PCI: Resource allocation cleanup for v4.3

2015-07-16 Thread Wei Yang
Yinghai,

Tested your latest for for-pci-v4.3-next branch, it works fine on my P8
machine.

BTW, the SRIOV works fine too. Previously failure is based on my mistake, I
have disabled SRIOV :-(

On Tue, Jul 14, 2015 at 03:46:31PM -0700, Yinghai Lu wrote:
Hi,

After 5b28541552ef (PCI: Restrict 64-bit prefetchable bridge windows
to 64-bit resources), we have several reports on resource allocation
failure, and we try to fix the problem with resource clip, and get
more problems.

One is realloc fail with two graphics cards above 4G.
One is from sparc that have problem with clip as we don't parse
mem64 for it.

Other report is about pci remove/rescan does not work on some setup
when BIOS tend to allocate small bus size.

This patchset enhance resource allocation to address those problems.
1. optimize bus mmio alignment calculation.
2. optimize bus mmio optional alignment calculation.
3. add support for alt size to prefer small bus size to small bus alignment.
   when we have small resource window on parent bridges.
4. treat ROM bar as optional resource.
5. during allocation, will pick up just fit resource.
6. parse MEM64 for sparc and other system with OF.
7. treat non-pref mmio64 if parent bridges are all pcie.
8. restore old pref allocation logic if hostbridge does not support mmio64 
really.
9. don't realloc resource if device firmware does not support bar change.
10. add pci=assign_pref_bars to clear and assign pref bars.
11. don't clear resource when allocation fails.

I put latest copy at:
  git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git 
 for-pci-v4.3-next

That is based on kind of v4.2-rc2.

v2:
- fix resource_disabled allocation from powerpc
- other warnings that were found by Fengguang's build robot.
- io port alignment clean up.
- rebased to v4.2-rc2
- better for two alt_size support.

Thanks

Yinghai

Yinghai Lu (49):
  PCI: Cleanup res_to_dev_res() printout for addon resources
  PCI: Reuse res_to_dev_res in reassign_resources_sorted
  PCI: Use correct align for optional only resources during sorting
  PCI: Optimize bus align/size calculation during sizing
  PCI: Optimize bus align/size calculation for optional during sizing
  PCI: Don't add too much optional size for hotplug bridge mmio
  PCI: Reorder resources list for must/optional resources
  PCI: Remove duplicated code for resource sorting
  PCI: Rename pdev_sort_resources to pdev_check_resources
  PCI: Treat ROM resource as optional during realloc
  PCI: Add debug printout during releasing partial assigned resources
  PCI: Simplify res reference using in __assign_resourcs_sorted
  PCI: Separate realloc list checking after allocation
  PCI: Add __add_to_list()
  PCI: Cache window alignment value
  PCI: Check if resource is allocated before pci_assign
  PCI: Separate out save_resources/restore_resource
  PCI: Move comment to pci_need_to_release()
  PCI: Separate must+optional assigning to another function
  PCI: Skip must+optional if there is no optional addon
  PCI: Move saved required resource list out of must+optional assigning
  PCI: Add alt_size allocation support
  PCI: Add support for more than two alt_size under same bridge
  PCI: Better support for two alt_size
  PCI: Don't add too much optional size for hotplug bridge io
  PCI: Move ISA ioport align out of calculate_iosize
  PCI: Unifiy calculate_size for io port and mmio
  PCI: Allow optional only io resource must size to be 0
  PCI: Unify skip_ioresource_align()
  PCI: Kill macro checking for bus io port sizing
  resources: Split out __allocate_resource()
  resources: Make allocate_resource return just fit resource
  PCI: Check pref compatible bit for mem64 resource of pcie device
  PCI: Only treat non-pef mmio64 as pref if all bridges has MEM_64
  PCI: Add has_mem64 for host_bridge
  PCI: Only treat non-pef mmio64 as pref if host-bridge has_mem64
  PCI: Restore pref mmio allocation logic for hostbridge without mmio64
  sparc/PCI: Add mem64 resource parsing for root bus
  sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in of parsing
  powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in of parsing
  of/PCI: Add IORESOURCE_MEM_64 for 64-bit resource
  PCI: Treat optional as must in first try for bridge rescan
  PCI: Get new realloc size for bridge for last try
  PCI: Don't release sibiling bridge resources during hotplug
  PCI: Don't release fixed resource for realloc
  PCI: Set resource to FIXED for lsi devices
  PCI, x86: Add pci=assign_pref_bars to re-allocate pref bars
  PCI: Introduce resource_disabled()
  PCI: Don't set flags to 0 when assign resource fail

 arch/alpha/kernel/pci.c   |2 +-
 arch/ia64/pci/pci.c   |4 +-
 arch/microblaze/pci/pci-common.c  |   23 +-
 arch/mn10300/unit-asb2305/pci-asb2305.c   |4 +-
 arch/mn10300/unit-asb2305/pci.c   |4 +-
 arch/powerpc/kernel/pci-common.c  |   27 +-
 arch/powerpc/kernel/pci_of_scan.c |4 +-
 

Re: [PATCH v2 00/49] PCI: Resource allocation cleanup for v4.3

2015-07-16 Thread Yinghai Lu
On Thu, Jul 16, 2015 at 6:51 PM, Wei Yang weiy...@linux.vnet.ibm.com wrote:
 Yinghai,

 Tested your latest for for-pci-v4.3-next branch, it works fine on my P8
 machine.

Thanks for testing.


 BTW, the SRIOV works fine too. Previously failure is based on my mistake, I
 have disabled SRIOV :-(

Good.
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/