Re: [PATCH v2 4/4] arm: dts: add 8devices Habanero DVK
On Mon 25 Jan 04:59 CST 2021, Robert Marko wrote: > On Fri, Jan 22, 2021 at 7:56 PM Bjorn Andersson > wrote: > > > On Fri 02 Oct 12:41 CDT 2020, Robert Marko wrote: > > > > > On Wed, Sep 9, 2020 at 9:56 PM Robert Marko > > wrote: > > > > > > > > 8devices Habanero DVK is a dual-band SoM development kit based on > > Qualcomm > > > > IPQ4019 + QCA8075 platform. > > > > > > > > Specs are: > > > > CPU: QCA IPQ4019 > > > > RAM: DDR3L 512MB > > > > Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship > > with it and some without) > > > > WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 > > > > WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 > > > > Ethernet: 5x Gbit LAN (QCA 8075) > > > > USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) > > > > MicroSD slot (Uses SD controller built into IPQ4019) > > > > SDIO3.0/EMMC slot (Uses the same SD controller) > > > > Mini PCI-E Gen 2.0 slot (Built into IPQ4019) > > > > 5x LEDs (4 GPIO controllable) > > > > 2x Pushbutton (1 is connected to GPIO, other to SoC reset) > > > > LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has > > no driver support) > > > > 1x UART 115200 rate on J18 > > > > > > > > 2x breakout development headers > > > > 12V DC Jack for power > > > > DIP switch for bootstrap configuration > > > > > > > > Signed-off-by: Robert Marko > > > > Cc: Luka Perkov > > > > --- > > > > Changes since v1: > > > > * Drop include that does not exist > > > > > > > > arch/arm/boot/dts/Makefile| 1 + > > > > .../boot/dts/qcom-ipq4019-habanero-dvk.dts| 304 ++ > > > > 2 files changed, 305 insertions(+) > > > > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts > > > > > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > > index 246d82fc5fcd..004262e0d699 100644 > > > > --- a/arch/arm/boot/dts/Makefile > > > > +++ b/arch/arm/boot/dts/Makefile > > > > @@ -898,6 +898,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > > > > qcom-ipq4019-ap.dk04.1-c3.dtb \ > > > > qcom-ipq4019-ap.dk07.1-c1.dtb \ > > > > qcom-ipq4019-ap.dk07.1-c2.dtb \ > > > > + qcom-ipq4019-habanero-dvk.dtb \ > > > > qcom-ipq8064-ap148.dtb \ > > > > qcom-ipq8064-rb3011.dtb \ > > > > qcom-msm8660-surf.dtb \ > > > > diff --git a/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts > > b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts [..] > > > > > > Hi, > > > Is there an issue with the patch preventing the review? > > > > > > > Found this in my inbox and I don't know why I never replied to you, > > perhaps because kernel test robot says it doesn't build... > > > > I tried to apply it now but there's no "vqmmc" so it doesn't build :/ > > > > > > If you're still interested in this I'd be happy to merge it if you can > > fix up the vqmmc - and if respinning it I would appreciate if you could > > sort the nodes alphabetically. > > > > Regards, > > Bjorn > > > > Hi, > This patch series depends on: > https://patchwork.kernel.org/patch/11765789/ > https://patchwork.kernel.org/patch/11760437/ > > USB nodes appear to finally be picked for the Qcom tree while the VQMMC LDO > is still pending. > > I am still interested in this and was planning to send the updated versions > anyway soon. > I Will respin these and reorder the nodes. > I've pushed out the vqmmc patch now as well. Looking forward to the respin of this patch. Thank you, Bjorn
Re: [PATCH v2 4/4] arm: dts: add 8devices Habanero DVK
On Fri, Jan 22, 2021 at 7:56 PM Bjorn Andersson
wrote:
>
> On Fri 02 Oct 12:41 CDT 2020, Robert Marko wrote:
>
> > On Wed, Sep 9, 2020 at 9:56 PM Robert Marko wrote:
> > >
> > > 8devices Habanero DVK is a dual-band SoM development kit based on Qualcomm
> > > IPQ4019 + QCA8075 platform.
> > >
> > > Specs are:
> > > CPU: QCA IPQ4019
> > > RAM: DDR3L 512MB
> > > Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship
> > > with it and some without)
> > > WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2
> > > WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2
> > > Ethernet: 5x Gbit LAN (QCA 8075)
> > > USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019)
> > > MicroSD slot (Uses SD controller built into IPQ4019)
> > > SDIO3.0/EMMC slot (Uses the same SD controller)
> > > Mini PCI-E Gen 2.0 slot (Built into IPQ4019)
> > > 5x LEDs (4 GPIO controllable)
> > > 2x Pushbutton (1 is connected to GPIO, other to SoC reset)
> > > LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no
> > > driver support)
> > > 1x UART 115200 rate on J18
> > >
> > > 2x breakout development headers
> > > 12V DC Jack for power
> > > DIP switch for bootstrap configuration
> > >
> > > Signed-off-by: Robert Marko
> > > Cc: Luka Perkov
> > > ---
> > > Changes since v1:
> > > * Drop include that does not exist
> > >
> > > arch/arm/boot/dts/Makefile| 1 +
> > > .../boot/dts/qcom-ipq4019-habanero-dvk.dts| 304 ++
> > > 2 files changed, 305 insertions(+)
> > > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > >
> > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > > index 246d82fc5fcd..004262e0d699 100644
> > > --- a/arch/arm/boot/dts/Makefile
> > > +++ b/arch/arm/boot/dts/Makefile
> > > @@ -898,6 +898,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> > > qcom-ipq4019-ap.dk04.1-c3.dtb \
> > > qcom-ipq4019-ap.dk07.1-c1.dtb \
> > > qcom-ipq4019-ap.dk07.1-c2.dtb \
> > > + qcom-ipq4019-habanero-dvk.dtb \
> > > qcom-ipq8064-ap148.dtb \
> > > qcom-ipq8064-rb3011.dtb \
> > > qcom-msm8660-surf.dtb \
> > > diff --git a/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > > b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > > new file mode 100644
> > > index ..fe054adda0a7
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > > @@ -0,0 +1,304 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > > +/* Copyright (c) 2019, Robert Marko */
> > > +
> > > +#include "qcom-ipq4019.dtsi"
> > > +#include
> > > +#include
> > > +
> > > +/ {
> > > + model = "8devices Habanero DVK";
> > > + compatible = "8dev,habanero-dvk";
> > > +
> > > + keys {
> > > + compatible = "gpio-keys";
> > > +
> > > + reset {
> > > + label = "reset";
> > > + gpios = < 8 GPIO_ACTIVE_LOW>;
> > > + linux,code = ;
> > > + };
> > > + };
> > > +
> > > + leds {
> > > + compatible = "gpio-leds";
> > > +
> > > + led_status: status {
> > > + label = "habanero-dvk:green:status";
> > > + gpios = < 37 GPIO_ACTIVE_HIGH>;
> > > + panic-indicator;
> > > + };
> > > +
> > > + led_upgrade: upgrade {
> > > + label = "habanero-dvk:green:upgrade";
> > > + gpios = < 40 GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > + wlan2g {
> > > + label = "habanero-dvk:green:wlan2g";
> > > + gpios = < 46 GPIO_ACTIVE_HIGH>;
> > > + linux,default-trigger = "phy0tpt";
> > > + };
> > > +
> > > + wlan5g {
> > > + label = "habanero-dvk:green:wlan5g";
> > > + gpios = < 48 GPIO_ACTIVE_HIGH>;
> > > + linux,default-trigger = "phy1tpt";
> > > + };
> > > + };
> > > +};
> > > +
> > > + {
> > > + status = "okay";
> > > +};
> > > +
> > > + {
> > > + status = "okay";
> > > +
> > > + pinctrl-0 = <_pins>;
> > > + pinctrl-names = "default";
> > > + cd-gpios = < 22 GPIO_ACTIVE_LOW>;
> > > + vqmmc-supply = <>;
> > > +};
> > > +
> > > +_bam {
> > > + status = "okay";
> > > +};
> > > +
> > > + {
> > > + mdio_pins: mdio_pinmux {
> > > + mux_1 {
> > > + pins = "gpio6";
> > > + function = "mdio";
> > > + bias-pull-up;
> > > + };
> > > +
> > > + mux_2 {
> > > + pins = "gpio7";
> > > + function = "mdc";
> > > + bias-pull-up;
> > > + };
> > > + };
> > > +
> > > + serial_pins:
Re: [PATCH v2 4/4] arm: dts: add 8devices Habanero DVK
On Fri 02 Oct 12:41 CDT 2020, Robert Marko wrote:
> On Wed, Sep 9, 2020 at 9:56 PM Robert Marko wrote:
> >
> > 8devices Habanero DVK is a dual-band SoM development kit based on Qualcomm
> > IPQ4019 + QCA8075 platform.
> >
> > Specs are:
> > CPU: QCA IPQ4019
> > RAM: DDR3L 512MB
> > Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with
> > it and some without)
> > WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2
> > WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2
> > Ethernet: 5x Gbit LAN (QCA 8075)
> > USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019)
> > MicroSD slot (Uses SD controller built into IPQ4019)
> > SDIO3.0/EMMC slot (Uses the same SD controller)
> > Mini PCI-E Gen 2.0 slot (Built into IPQ4019)
> > 5x LEDs (4 GPIO controllable)
> > 2x Pushbutton (1 is connected to GPIO, other to SoC reset)
> > LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no
> > driver support)
> > 1x UART 115200 rate on J18
> >
> > 2x breakout development headers
> > 12V DC Jack for power
> > DIP switch for bootstrap configuration
> >
> > Signed-off-by: Robert Marko
> > Cc: Luka Perkov
> > ---
> > Changes since v1:
> > * Drop include that does not exist
> >
> > arch/arm/boot/dts/Makefile| 1 +
> > .../boot/dts/qcom-ipq4019-habanero-dvk.dts| 304 ++
> > 2 files changed, 305 insertions(+)
> > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 246d82fc5fcd..004262e0d699 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -898,6 +898,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> > qcom-ipq4019-ap.dk04.1-c3.dtb \
> > qcom-ipq4019-ap.dk07.1-c1.dtb \
> > qcom-ipq4019-ap.dk07.1-c2.dtb \
> > + qcom-ipq4019-habanero-dvk.dtb \
> > qcom-ipq8064-ap148.dtb \
> > qcom-ipq8064-rb3011.dtb \
> > qcom-msm8660-surf.dtb \
> > diff --git a/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > new file mode 100644
> > index ..fe054adda0a7
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> > @@ -0,0 +1,304 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > +/* Copyright (c) 2019, Robert Marko */
> > +
> > +#include "qcom-ipq4019.dtsi"
> > +#include
> > +#include
> > +
> > +/ {
> > + model = "8devices Habanero DVK";
> > + compatible = "8dev,habanero-dvk";
> > +
> > + keys {
> > + compatible = "gpio-keys";
> > +
> > + reset {
> > + label = "reset";
> > + gpios = < 8 GPIO_ACTIVE_LOW>;
> > + linux,code = ;
> > + };
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + led_status: status {
> > + label = "habanero-dvk:green:status";
> > + gpios = < 37 GPIO_ACTIVE_HIGH>;
> > + panic-indicator;
> > + };
> > +
> > + led_upgrade: upgrade {
> > + label = "habanero-dvk:green:upgrade";
> > + gpios = < 40 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + wlan2g {
> > + label = "habanero-dvk:green:wlan2g";
> > + gpios = < 46 GPIO_ACTIVE_HIGH>;
> > + linux,default-trigger = "phy0tpt";
> > + };
> > +
> > + wlan5g {
> > + label = "habanero-dvk:green:wlan5g";
> > + gpios = < 48 GPIO_ACTIVE_HIGH>;
> > + linux,default-trigger = "phy1tpt";
> > + };
> > + };
> > +};
> > +
> > + {
> > + status = "okay";
> > +};
> > +
> > + {
> > + status = "okay";
> > +
> > + pinctrl-0 = <_pins>;
> > + pinctrl-names = "default";
> > + cd-gpios = < 22 GPIO_ACTIVE_LOW>;
> > + vqmmc-supply = <>;
> > +};
> > +
> > +_bam {
> > + status = "okay";
> > +};
> > +
> > + {
> > + mdio_pins: mdio_pinmux {
> > + mux_1 {
> > + pins = "gpio6";
> > + function = "mdio";
> > + bias-pull-up;
> > + };
> > +
> > + mux_2 {
> > + pins = "gpio7";
> > + function = "mdc";
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + serial_pins: serial_pinmux {
> > + mux {
> > + pins = "gpio16", "gpio17";
> > + function = "blsp_uart0";
> > + bias-disable;
> > + };
> > + };
> > +
> > + spi_0_pins: spi_0_pinmux {
> > + pinmux {
> > + function =
Re: [PATCH v2 4/4] arm: dts: add 8devices Habanero DVK
On Wed, Sep 9, 2020 at 9:56 PM Robert Marko wrote:
>
> 8devices Habanero DVK is a dual-band SoM development kit based on Qualcomm
> IPQ4019 + QCA8075 platform.
>
> Specs are:
> CPU: QCA IPQ4019
> RAM: DDR3L 512MB
> Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it
> and some without)
> WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2
> WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2
> Ethernet: 5x Gbit LAN (QCA 8075)
> USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019)
> MicroSD slot (Uses SD controller built into IPQ4019)
> SDIO3.0/EMMC slot (Uses the same SD controller)
> Mini PCI-E Gen 2.0 slot (Built into IPQ4019)
> 5x LEDs (4 GPIO controllable)
> 2x Pushbutton (1 is connected to GPIO, other to SoC reset)
> LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no
> driver support)
> 1x UART 115200 rate on J18
>
> 2x breakout development headers
> 12V DC Jack for power
> DIP switch for bootstrap configuration
>
> Signed-off-by: Robert Marko
> Cc: Luka Perkov
> ---
> Changes since v1:
> * Drop include that does not exist
>
> arch/arm/boot/dts/Makefile| 1 +
> .../boot/dts/qcom-ipq4019-habanero-dvk.dts| 304 ++
> 2 files changed, 305 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 246d82fc5fcd..004262e0d699 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -898,6 +898,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq4019-ap.dk04.1-c3.dtb \
> qcom-ipq4019-ap.dk07.1-c1.dtb \
> qcom-ipq4019-ap.dk07.1-c2.dtb \
> + qcom-ipq4019-habanero-dvk.dtb \
> qcom-ipq8064-ap148.dtb \
> qcom-ipq8064-rb3011.dtb \
> qcom-msm8660-surf.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> new file mode 100644
> index ..fe054adda0a7
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
> @@ -0,0 +1,304 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/* Copyright (c) 2019, Robert Marko */
> +
> +#include "qcom-ipq4019.dtsi"
> +#include
> +#include
> +
> +/ {
> + model = "8devices Habanero DVK";
> + compatible = "8dev,habanero-dvk";
> +
> + keys {
> + compatible = "gpio-keys";
> +
> + reset {
> + label = "reset";
> + gpios = < 8 GPIO_ACTIVE_LOW>;
> + linux,code = ;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_status: status {
> + label = "habanero-dvk:green:status";
> + gpios = < 37 GPIO_ACTIVE_HIGH>;
> + panic-indicator;
> + };
> +
> + led_upgrade: upgrade {
> + label = "habanero-dvk:green:upgrade";
> + gpios = < 40 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wlan2g {
> + label = "habanero-dvk:green:wlan2g";
> + gpios = < 46 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tpt";
> + };
> +
> + wlan5g {
> + label = "habanero-dvk:green:wlan5g";
> + gpios = < 48 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy1tpt";
> + };
> + };
> +};
> +
> + {
> + status = "okay";
> +};
> +
> + {
> + status = "okay";
> +
> + pinctrl-0 = <_pins>;
> + pinctrl-names = "default";
> + cd-gpios = < 22 GPIO_ACTIVE_LOW>;
> + vqmmc-supply = <>;
> +};
> +
> +_bam {
> + status = "okay";
> +};
> +
> + {
> + mdio_pins: mdio_pinmux {
> + mux_1 {
> + pins = "gpio6";
> + function = "mdio";
> + bias-pull-up;
> + };
> +
> + mux_2 {
> + pins = "gpio7";
> + function = "mdc";
> + bias-pull-up;
> + };
> + };
> +
> + serial_pins: serial_pinmux {
> + mux {
> + pins = "gpio16", "gpio17";
> + function = "blsp_uart0";
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pinmux {
> + pinmux {
> + function = "blsp_spi0";
> + pins = "gpio13", "gpio14", "gpio15";
> + drive-strength = <12>;
> + bias-disable;
> + };
> +
> + pinmux_cs {
> + function = "gpio";
> + pins = "gpio12";
> + drive-strength =
