Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
by the way. this big fat kernel warning exists in all operation modes unless anything else but aes-128 ccmp is used. since the chipset is capable of doing gcmp etc. as well it would be nice if this issue can be fixed. otherwise encryption support can be defined as "broken" for mt7615 Am 06.06.2019 um 18:19 schrieb Lorenzo Bianconi: i tested your patch against a qca 9984 chipset using SAE and without encryption. both did not work. the devices are connecting, but no data connection is possible Hi Sebastian, I tested Ryder's patch using mt76x2 as mesh peer and it works fine for me. Could you please provide some more info? Regards, Lorenzo Sebastian Am 03.06.2019 um 08:08 schrieb Ryder Lee: Enable NL80211_IFTYPE_MESH_POINT and update its path. Signed-off-by: Ryder Lee --- Changes since v3 - fix a wrong expression Changes since v2 - remove unused definitions --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++ drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 -- 4 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index 59f604f3161f..f860af6a42da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = { { .max = MT7615_MAX_INTERFACES, .types = BIT(NL80211_IFTYPE_AP) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_STATION) } }; @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev) dev->mt76.antenna_mask = 0xf; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_AP); ret = mt76_register_device(>mt76, true, mt7615_rates, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index b0bb7cc12385..585e67fa2728 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask) switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: /* ap use hw bssid 0 and ext bssid */ if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 43f70195244c..e82297048449 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, switch (vif->type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: tx_wlan_idx = mvif->sta.wcid.idx; conn_type = CONNECTION_INFRA_AP; break; @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif, .rx_wtbl = { .tag = cpu_to_le16(WTBL_RX), .len = cpu_to_le16(sizeof(struct wtbl_rx)), - .rca1 = vif->type != NL80211_IFTYPE_AP, + .rca1 = vif->type == NL80211_IFTYPE_STATION, .rca2 = 1, .rv = 1, }, @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type) { switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: if (conn_type) *conn_type = CONNECTION_INFRA_STA; break; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h index e96efb13fa4d..0915cb735699 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h @@ -105,25 +105,19 @@ enum { #define STA_TYPE_STABIT(0) #define STA_TYPE_AP BIT(1) #define STA_TYPE_ADHOC BIT(2) -#define STA_TYPE_TDLSBIT(3) #define STA_TYPE_WDSBIT(4) #define STA_TYPE_BC BIT(5) #define NETWORK_INFRA BIT(16) #define NETWORK_P2P BIT(17) #define NETWORK_IBSSBIT(18) -#define NETWORK_MESH BIT(19) -#define NETWORK_BOW BIT(20) #define NETWORK_WDS BIT(21) #define CONNECTION_INFRA_STA(STA_TYPE_STA | NETWORK_INFRA) #define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA)
Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
Am 06.06.2019 um 18:19 schrieb Lorenzo Bianconi: i tested your patch against a qca 9984 chipset using SAE and without encryption. both did not work. the devices are connecting, but no data connection is possible Hi Sebastian, I tested Ryder's patch using mt76x2 as mesh peer and it works fine for me. Could you please provide some more info? the peer was a QCA9984 chipset running ath10k. the following wpa supplicant config was used and encryption clearly cannot work since mt76_wcid_key_setup does trigger a bug since i_get_key_rx_seq does not accept tid as argument != 0 for aes_cmac (which is used for sae) consider the same setup works with ath5k, 9k and 10k perfect with no issues. in my test setup i also connected now 3 devices. 2 9984 and 1 mt7615 to ensure that all is working. the qca 9984 devices can ping each other, only the mt7615 does not work. the setups are all identical (except for ips) fast_reauth=1 eapol_version=1 sae_groups=19 20 21 network={ disable_ht40=1 ssid="mt7615-24" mode=5 frequency=2452 htmode=HT20 scan_ssid=1 key_mgmt=SAE ieee80211w=2 noscan=1 pairwise=CCMP group=CCMP proto=RSN sae_password="12345678" } and the bug again WARNING: CPU: 2 PID: 22086 at /home/seg/DEV/mt7621/src/router/private/compat-wireless-2017-09-03/net/mac80211/key.c:1096 mt76_wcid_key_setup+0x58/0x9c [mt76] Modules linked in: shortcut_fe gcm ghash_generic ctr gf128mul mt7615e mt76 mac80211 compat CPU: 2 PID: 22086 Comm: wpa_supplicant Tainted: G W 4.14.123 #106 Stack : 87c2d000 8007d8b4 8048 80482b9c 8061 805a4390 8057e2b4 87c4b99c 870a59dc 805e4767 80578288 0001 87c4b940 805e9f78 8064 81147bb8 06ce 0007 8065 8065 20202020 8000 8061 872b9fe0 872a2b14 0448 87c2d000 0010 8022d660 0008 80640008 ... Call Trace: [<800153e0>] show_stack+0x58/0x100 [<8042e83c>] dump_stack+0x9c/0xe0 [<800349f0>] __warn+0xe4/0x144 [<8003468c>] warn_slowpath_null+0x1c/0x30 [<872b9fe0>] mt76_wcid_key_setup+0x58/0x9c [mt76] [<87611690>] mt7615_eeprom_init+0x7b4/0xe9c [mt7615e] ---[ end trace e24aeb4b542e0df9 ]--- Regards, Lorenzo Sebastian Am 03.06.2019 um 08:08 schrieb Ryder Lee: Enable NL80211_IFTYPE_MESH_POINT and update its path. Signed-off-by: Ryder Lee --- Changes since v3 - fix a wrong expression Changes since v2 - remove unused definitions --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++ drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 -- 4 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index 59f604f3161f..f860af6a42da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = { { .max = MT7615_MAX_INTERFACES, .types = BIT(NL80211_IFTYPE_AP) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_STATION) } }; @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev) dev->mt76.antenna_mask = 0xf; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_AP); ret = mt76_register_device(>mt76, true, mt7615_rates, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index b0bb7cc12385..585e67fa2728 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask) switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: /* ap use hw bssid 0 and ext bssid */ if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 43f70195244c..e82297048449 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, switch (vif->type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: tx_wlan_idx = mvif->sta.wcid.idx; conn_type = CONNECTION_INFRA_AP; break;
Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
> > i tested your patch against a qca 9984 chipset using SAE and without > encryption. both did not work. the devices are connecting, but no data > connection is possible Hi Sebastian, I tested Ryder's patch using mt76x2 as mesh peer and it works fine for me. Could you please provide some more info? Regards, Lorenzo > > > Sebastian > > Am 03.06.2019 um 08:08 schrieb Ryder Lee: > > Enable NL80211_IFTYPE_MESH_POINT and update its path. > > > > Signed-off-by: Ryder Lee > > --- > > Changes since v3 - fix a wrong expression > > Changes since v2 - remove unused definitions > > --- > > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++ > > drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + > > drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++- > > drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 -- > > 4 files changed, 10 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > index 59f604f3161f..f860af6a42da 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = > > { > > { > > .max = MT7615_MAX_INTERFACES, > > .types = BIT(NL80211_IFTYPE_AP) | > > +#ifdef CONFIG_MAC80211_MESH > > + BIT(NL80211_IFTYPE_MESH_POINT) | > > +#endif > >BIT(NL80211_IFTYPE_STATION) > > } > > }; > > @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev) > > dev->mt76.antenna_mask = 0xf; > > > > wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | > > +#ifdef CONFIG_MAC80211_MESH > > + BIT(NL80211_IFTYPE_MESH_POINT) | > > +#endif > >BIT(NL80211_IFTYPE_AP); > > > > ret = mt76_register_device(>mt76, true, mt7615_rates, > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c > > b/drivers/net/wireless/mediatek/mt76/mt7615/main.c > > index b0bb7cc12385..585e67fa2728 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c > > @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 > > mask) > > > > switch (type) { > > case NL80211_IFTYPE_AP: > > + case NL80211_IFTYPE_MESH_POINT: > > /* ap use hw bssid 0 and ext bssid */ > > if (~mask & BIT(HW_BSSID_0)) > > return HW_BSSID_0; > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c > > b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c > > index 43f70195244c..e82297048449 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c > > @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, > > > > switch (vif->type) { > > case NL80211_IFTYPE_AP: > > + case NL80211_IFTYPE_MESH_POINT: > > tx_wlan_idx = mvif->sta.wcid.idx; > > conn_type = CONNECTION_INFRA_AP; > > break; > > @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct > > ieee80211_vif *vif, > > .rx_wtbl = { > > .tag = cpu_to_le16(WTBL_RX), > > .len = cpu_to_le16(sizeof(struct wtbl_rx)), > > - .rca1 = vif->type != NL80211_IFTYPE_AP, > > + .rca1 = vif->type == NL80211_IFTYPE_STATION, > > .rca2 = 1, > > .rv = 1, > > }, > > @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum > > nl80211_iftype type, u32 *conn_type) > > { > > switch (type) { > > case NL80211_IFTYPE_AP: > > + case NL80211_IFTYPE_MESH_POINT: > > if (conn_type) > > *conn_type = CONNECTION_INFRA_STA; > > break; > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h > > b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h > > index e96efb13fa4d..0915cb735699 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h > > @@ -105,25 +105,19 @@ enum { > > #define STA_TYPE_STABIT(0) > > #define STA_TYPE_AP BIT(1) > > #define STA_TYPE_ADHOC BIT(2) > > -#define STA_TYPE_TDLSBIT(3) > > #define STA_TYPE_WDSBIT(4) > > #define STA_TYPE_BC BIT(5) > > > > #define NETWORK_INFRA BIT(16) > > #define NETWORK_P2P BIT(17) > > #define NETWORK_IBSSBIT(18) > > -#define NETWORK_MESH BIT(19) > > -#define NETWORK_BOW BIT(20) > > #define NETWORK_WDS BIT(21) > > > > #define CONNECTION_INFRA_STA(STA_TYPE_STA | NETWORK_INFRA) > > #define
Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
On Thu, 2019-06-06 at 12:14 +0200, Sebastian Gottschall wrote: > in addition you should take care about this problem which is raised up > if SAE is used. since AES-CMAC required tid to be non zero > > WARNING: CPU: 2 PID: 15324 at > /home/seg/DEV/mt7621/src/router/private/compat-wireless-2017-09-03/net/mac80211/key.c:1096 > > mt76_wcid_key_setup+0x58/0x9c [mt76] > Modules linked in: shortcut_fe gcm ghash_generic ctr gf128mul mt7615e > mt76 mac80211 compat > CPU: 2 PID: 15324 Comm: wpa_supplicant Tainted: GW 4.14.123 #106 > Stack : 87c2d000 8007d8b4 8048 80482b9c 8061 > 805a4390 > 8057e2b4 854fb99c 87ed045c 805e4767 80578288 0001 854fb940 > 805e9f78 > 8064 81147bb8 0584 0007 > > 8065 8065 20202020 8000 8061 > 872b9fe0 > 872a2b14 0448 87c2d000 0010 8022d660 0008 > 80640008 > ... > Call Trace: > [<800153e0>] show_stack+0x58/0x100 > [<8042e83c>] dump_stack+0x9c/0xe0 > [<800349f0>] __warn+0xe4/0x144 > [<8003468c>] warn_slowpath_null+0x1c/0x30 > [<872b9fe0>] mt76_wcid_key_setup+0x58/0x9c [mt76] > [<87611690>] mt7615_eeprom_init+0x7b4/0xe9c [mt7615e] > ---[ end trace e24aeb4b542e0dea ]--- This is fixed by Lorenzo's patch - https://patchwork.kernel.org/patch/10976191/ Thanks. Ryder
Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
in addition you should take care about this problem which is raised up if SAE is used. since AES-CMAC required tid to be non zero WARNING: CPU: 2 PID: 15324 at /home/seg/DEV/mt7621/src/router/private/compat-wireless-2017-09-03/net/mac80211/key.c:1096 mt76_wcid_key_setup+0x58/0x9c [mt76] Modules linked in: shortcut_fe gcm ghash_generic ctr gf128mul mt7615e mt76 mac80211 compat CPU: 2 PID: 15324 Comm: wpa_supplicant Tainted: G W 4.14.123 #106 Stack : 87c2d000 8007d8b4 8048 80482b9c 8061 805a4390 8057e2b4 854fb99c 87ed045c 805e4767 80578288 0001 854fb940 805e9f78 8064 81147bb8 0584 0007 8065 8065 20202020 8000 8061 872b9fe0 872a2b14 0448 87c2d000 0010 8022d660 0008 80640008 ... Call Trace: [<800153e0>] show_stack+0x58/0x100 [<8042e83c>] dump_stack+0x9c/0xe0 [<800349f0>] __warn+0xe4/0x144 [<8003468c>] warn_slowpath_null+0x1c/0x30 [<872b9fe0>] mt76_wcid_key_setup+0x58/0x9c [mt76] [<87611690>] mt7615_eeprom_init+0x7b4/0xe9c [mt7615e] ---[ end trace e24aeb4b542e0dea ]--- Am 03.06.2019 um 08:08 schrieb Ryder Lee: Enable NL80211_IFTYPE_MESH_POINT and update its path. Signed-off-by: Ryder Lee --- Changes since v3 - fix a wrong expression Changes since v2 - remove unused definitions --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++ drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 -- 4 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index 59f604f3161f..f860af6a42da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = { { .max = MT7615_MAX_INTERFACES, .types = BIT(NL80211_IFTYPE_AP) | +#ifdef CONFIG_MAC80211_MESH +BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_STATION) } }; @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev) dev->mt76.antenna_mask = 0xf; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | +#ifdef CONFIG_MAC80211_MESH +BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_AP); ret = mt76_register_device(>mt76, true, mt7615_rates, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index b0bb7cc12385..585e67fa2728 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask) switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: /* ap use hw bssid 0 and ext bssid */ if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 43f70195244c..e82297048449 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, switch (vif->type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: tx_wlan_idx = mvif->sta.wcid.idx; conn_type = CONNECTION_INFRA_AP; break; @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif, .rx_wtbl = { .tag = cpu_to_le16(WTBL_RX), .len = cpu_to_le16(sizeof(struct wtbl_rx)), - .rca1 = vif->type != NL80211_IFTYPE_AP, + .rca1 = vif->type == NL80211_IFTYPE_STATION, .rca2 = 1, .rv = 1, }, @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type) { switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: if (conn_type) *conn_type = CONNECTION_INFRA_STA; break; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h index e96efb13fa4d..0915cb735699 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h @@ -105,25 +105,19 @@ enum { #define STA_TYPE_STA BIT(0) #define STA_TYPE_AP BIT(1) #define STA_TYPE_ADHOC
Re: [PATCH v3 1/2] mt76: mt7615: enable support for mesh
i tested your patch against a qca 9984 chipset using SAE and without encryption. both did not work. the devices are connecting, but no data connection is possible Sebastian Am 03.06.2019 um 08:08 schrieb Ryder Lee: Enable NL80211_IFTYPE_MESH_POINT and update its path. Signed-off-by: Ryder Lee --- Changes since v3 - fix a wrong expression Changes since v2 - remove unused definitions --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++ drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 + drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 -- 4 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index 59f604f3161f..f860af6a42da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = { { .max = MT7615_MAX_INTERFACES, .types = BIT(NL80211_IFTYPE_AP) | +#ifdef CONFIG_MAC80211_MESH +BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_STATION) } }; @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev) dev->mt76.antenna_mask = 0xf; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | +#ifdef CONFIG_MAC80211_MESH +BIT(NL80211_IFTYPE_MESH_POINT) | +#endif BIT(NL80211_IFTYPE_AP); ret = mt76_register_device(>mt76, true, mt7615_rates, diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index b0bb7cc12385..585e67fa2728 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask) switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: /* ap use hw bssid 0 and ext bssid */ if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 43f70195244c..e82297048449 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, switch (vif->type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: tx_wlan_idx = mvif->sta.wcid.idx; conn_type = CONNECTION_INFRA_AP; break; @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif, .rx_wtbl = { .tag = cpu_to_le16(WTBL_RX), .len = cpu_to_le16(sizeof(struct wtbl_rx)), - .rca1 = vif->type != NL80211_IFTYPE_AP, + .rca1 = vif->type == NL80211_IFTYPE_STATION, .rca2 = 1, .rv = 1, }, @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type) { switch (type) { case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: if (conn_type) *conn_type = CONNECTION_INFRA_STA; break; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h index e96efb13fa4d..0915cb735699 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h @@ -105,25 +105,19 @@ enum { #define STA_TYPE_STA BIT(0) #define STA_TYPE_AP BIT(1) #define STA_TYPE_ADHOCBIT(2) -#define STA_TYPE_TDLS BIT(3) #define STA_TYPE_WDS BIT(4) #define STA_TYPE_BC BIT(5) #define NETWORK_INFRA BIT(16) #define NETWORK_P2P BIT(17) #define NETWORK_IBSS BIT(18) -#define NETWORK_MESH BIT(19) -#define NETWORK_BOWBIT(20) #define NETWORK_WDS BIT(21) #define CONNECTION_INFRA_STA (STA_TYPE_STA | NETWORK_INFRA) #define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA) #define CONNECTION_P2P_GC (STA_TYPE_STA | NETWORK_P2P) #define CONNECTION_P2P_GO (STA_TYPE_AP | NETWORK_P2P) -#define CONNECTION_MESH_STA(STA_TYPE_STA | NETWORK_MESH) -#define CONNECTION_MESH_AP (STA_TYPE_AP | NETWORK_MESH) #define CONNECTION_IBSS_ADHOC (STA_TYPE_ADHOC | NETWORK_IBSS) -#define CONNECTION_TDLS(STA_TYPE_STA | NETWORK_INFRA | STA_TYPE_TDLS) #define CONNECTION_WDS(STA_TYPE_WDS | NETWORK_WDS) #define