Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
On Mon, Sep 21, 2015 at 06:27:40PM +0800, Yakir Yang wrote:
> Hi Thierry,
>
> Thanks for your suggest :)
>
> On 09/21/2015 05:15 PM, Thierry Reding wrote:
> >On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote:
> >>Hi Heiko,
> >>
> >>On 09/02/2015 10:15 AM, Yakir Yang wrote:
> >>>Hi Heiko,
> >>>
> >>>在 09/02/2015 05:47 AM, Heiko Stuebner 写道:
> Hi Yakir,
>
> Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang:
> >The Samsung Exynos eDP controller and Rockchip RK3288 eDP
> >controller
> >share the same IP, so a lot of parts can be re-used. I split the common
> >code into bridge directory, then rk3288 and exynos only need to keep
> >some platform code. Cause I can't find the exact IP name of exynos dp
> >controller, so I decide to name dp core driver with "analogix" which I
> >find in rk3288 eDP TRM ;)
> >
> >Beyond that, there are three light registers setting differents bewteen
> >exynos and rk3288.
> >1. RK3288 have five special pll resigters which not indicata in exynos
> >dp controller.
> >2. The address of DP_PHY_PD(dp phy power manager register) are
> >different
> >between rk3288 and exynos.
> >3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
> >debug
> >register).
> >
> >I have verified this series on two kinds of rockchip platform board,
> >one
> >is rk3288 sdk board which connect with a 2K display port monitor, the
> >other
> >is google jerry chromebook which connect with a eDP screen
> >"cnm,n116bgeea2",
> >both of them works rightlly.
> it looks like during the rebase something did go wrong and I found some
> issues
> I mentioned in the replies to individual patches.
>
> I did prepare a branch based on mainline [0] with both the old and the
> new edp
> driver - rk3288_veyron_defconfig build both drivers into the image.
>
> While the old driver still works, I wasn't able to make the new one work
> yet
> ... the drm core does find the connector, but not that anything is
> connected
> to it. I'll try to dig deeper tomorrow, but maybe you'll see anything
> interesting before then.
> >>>Many thanks for your comment and debug, I would rebase on your
> >>>"edp-with-veyron" branch and fix the broken, make sure v6 would
> >>>work rightly at least in your side and my side.
> >>Just like we talk off line, I guess there are two tricky questions which
> >>make analogix_dp just crash/failed on rockchip platform:
> >>
> >>- One is how to reach a agreement with the common way to register
> >>connector. There would be a conflict with Exynos & IMX & Rockchip.
> >> On analogix_dp thread, Exynos want to register connector when that
> >>connector is ready.
> >> On dw_hdmi thread, IMX want to register connector when all component
> >> is
> >>already.
> >> So Exynos & IMX & Rockchip should reach a common way to register
> >>connector to fix this issue.
> >>
> >>- The other is atomic API.
> >> The rockchip drm haven't implemented the atomic API, but the original
> >>exynos_dp have used the atomic API on connector helper function. That's why
> >>analogix_dp just keep crash on your side.
> >There's really no reason not to convert Rockchip to atomic. It will have
> >to happen eventually anyway.
>
> Do agree on this point, and I see Tomasz Figa have done some WIP
> works on implementing the atomic_commit, maybe would upstream
> in further.(https://chromium-review.googlesource.com/#/c/284560/1)
>
>
> >That said, there's another option that would allow you to side-step both
> >of the above problems at the same time. If you turn the common code into
> >a helper library that should give you enough flexibility to integrate it
> >into all existing users. For example you could leave out the connector
> >registration and let the drivers do that. Similarly since the helpers
> >are only hooked up at registration time you could probably find a way to
> >share the low-level code but again leave it up to the drivers to glue it
> >all together at registration time (drivers could wrap the low-level code
> >with atomic or non-atomic callbacks).
>
> Wow, sounds good, but I'm not sure I understand this rightly. Do you
> mean that I could support two kinds of callbacks in analogix_dp_core
> driver, and export them out. And move the connector registration code
> into the helper driver (like exynos_dp.c), so helper driver could chose to
> use the atomic or non-atomic callbacks. like:
>
> -- analogix_dp_core.c
>
> ...
> struct drm_connector_funcs analogix_dp_connector_atomic_funcs = {
> .dpms = drm_atomic_helper_connector_dpms,
> .fill_modes = drm_helper_probe_single_connector_modes,
> .detect = analogix_dp_detect,
> .destroy = analogix_dp_connector_destroy,
> .reset =
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Thierry,
Thanks for your suggest :)
On 09/21/2015 05:15 PM, Thierry Reding wrote:
On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote:
Hi Heiko,
On 09/02/2015 10:15 AM, Yakir Yang wrote:
Hi Heiko,
在 09/02/2015 05:47 AM, Heiko Stuebner 写道:
Hi Yakir,
Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang:
The Samsung Exynos eDP controller and Rockchip RK3288 eDP
controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM ;)
Beyond that, there are three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are
different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
debug
register).
I have verified this series on two kinds of rockchip platform board,
one
is rk3288 sdk board which connect with a 2K display port monitor, the
other
is google jerry chromebook which connect with a eDP screen
"cnm,n116bgeea2",
both of them works rightlly.
it looks like during the rebase something did go wrong and I found some
issues
I mentioned in the replies to individual patches.
I did prepare a branch based on mainline [0] with both the old and the
new edp
driver - rk3288_veyron_defconfig build both drivers into the image.
While the old driver still works, I wasn't able to make the new one work
yet
... the drm core does find the connector, but not that anything is
connected
to it. I'll try to dig deeper tomorrow, but maybe you'll see anything
interesting before then.
Many thanks for your comment and debug, I would rebase on your
"edp-with-veyron" branch and fix the broken, make sure v6 would
work rightly at least in your side and my side.
Just like we talk off line, I guess there are two tricky questions which
make analogix_dp just crash/failed on rockchip platform:
- One is how to reach a agreement with the common way to register
connector. There would be a conflict with Exynos & IMX & Rockchip.
On analogix_dp thread, Exynos want to register connector when that
connector is ready.
On dw_hdmi thread, IMX want to register connector when all component is
already.
So Exynos & IMX & Rockchip should reach a common way to register
connector to fix this issue.
- The other is atomic API.
The rockchip drm haven't implemented the atomic API, but the original
exynos_dp have used the atomic API on connector helper function. That's why
analogix_dp just keep crash on your side.
There's really no reason not to convert Rockchip to atomic. It will have
to happen eventually anyway.
Do agree on this point, and I see Tomasz Figa have done some WIP
works on implementing the atomic_commit, maybe would upstream
in further.(https://chromium-review.googlesource.com/#/c/284560/1)
That said, there's another option that would allow you to side-step both
of the above problems at the same time. If you turn the common code into
a helper library that should give you enough flexibility to integrate it
into all existing users. For example you could leave out the connector
registration and let the drivers do that. Similarly since the helpers
are only hooked up at registration time you could probably find a way to
share the low-level code but again leave it up to the drivers to glue it
all together at registration time (drivers could wrap the low-level code
with atomic or non-atomic callbacks).
Wow, sounds good, but I'm not sure I understand this rightly. Do you
mean that I could support two kinds of callbacks in analogix_dp_core
driver, and export them out. And move the connector registration code
into the helper driver (like exynos_dp.c), so helper driver could chose to
use the atomic or non-atomic callbacks. like:
-- analogix_dp_core.c
...
struct drm_connector_funcs analogix_dp_connector_atomic_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = analogix_dp_detect,
.destroy = analogix_dp_connector_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state =
drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
EXPORT_SYMBOL(analogix_dp_connector_atomic_funcs);
struct drm_connector_funcs analogix_dp_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = analogix_dp_detect,
.destroy = analogix_dp_connector_destroy,
};
EXPORT_SYMBOL(analogix_dp_connector_funcs);
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote: > Hi Heiko, > > On 09/02/2015 10:15 AM, Yakir Yang wrote: > >Hi Heiko, > > > >在 09/02/2015 05:47 AM, Heiko Stuebner 写道: > >>Hi Yakir, > >> > >>Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: > >>>The Samsung Exynos eDP controller and Rockchip RK3288 eDP > >>>controller > >>>share the same IP, so a lot of parts can be re-used. I split the common > >>>code into bridge directory, then rk3288 and exynos only need to keep > >>>some platform code. Cause I can't find the exact IP name of exynos dp > >>>controller, so I decide to name dp core driver with "analogix" which I > >>>find in rk3288 eDP TRM ;) > >>> > >>>Beyond that, there are three light registers setting differents bewteen > >>>exynos and rk3288. > >>>1. RK3288 have five special pll resigters which not indicata in exynos > >>>dp controller. > >>>2. The address of DP_PHY_PD(dp phy power manager register) are > >>>different > >>>between rk3288 and exynos. > >>>3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp > >>>debug > >>>register). > >>> > >>>I have verified this series on two kinds of rockchip platform board, > >>>one > >>>is rk3288 sdk board which connect with a 2K display port monitor, the > >>>other > >>>is google jerry chromebook which connect with a eDP screen > >>>"cnm,n116bgeea2", > >>>both of them works rightlly. > >>it looks like during the rebase something did go wrong and I found some > >>issues > >>I mentioned in the replies to individual patches. > >> > >>I did prepare a branch based on mainline [0] with both the old and the > >>new edp > >>driver - rk3288_veyron_defconfig build both drivers into the image. > >> > >>While the old driver still works, I wasn't able to make the new one work > >>yet > >>... the drm core does find the connector, but not that anything is > >>connected > >>to it. I'll try to dig deeper tomorrow, but maybe you'll see anything > >>interesting before then. > > > >Many thanks for your comment and debug, I would rebase on your > >"edp-with-veyron" branch and fix the broken, make sure v6 would > >work rightly at least in your side and my side. > > Just like we talk off line, I guess there are two tricky questions which > make analogix_dp just crash/failed on rockchip platform: > > - One is how to reach a agreement with the common way to register > connector. There would be a conflict with Exynos & IMX & Rockchip. > On analogix_dp thread, Exynos want to register connector when that > connector is ready. > On dw_hdmi thread, IMX want to register connector when all component is > already. > So Exynos & IMX & Rockchip should reach a common way to register > connector to fix this issue. > > - The other is atomic API. > The rockchip drm haven't implemented the atomic API, but the original > exynos_dp have used the atomic API on connector helper function. That's why > analogix_dp just keep crash on your side. There's really no reason not to convert Rockchip to atomic. It will have to happen eventually anyway. That said, there's another option that would allow you to side-step both of the above problems at the same time. If you turn the common code into a helper library that should give you enough flexibility to integrate it into all existing users. For example you could leave out the connector registration and let the drivers do that. Similarly since the helpers are only hooked up at registration time you could probably find a way to share the low-level code but again leave it up to the drivers to glue it all together at registration time (drivers could wrap the low-level code with atomic or non-atomic callbacks). This option may also have the benefit of loosening the coupling between DRM drivers and the helper code for this IP, which may be handy in case the drivers diverge again in the future, or ease transitions to new API. Thierry signature.asc Description: PGP signature
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Thierry,
Thanks for your suggest :)
On 09/21/2015 05:15 PM, Thierry Reding wrote:
On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote:
Hi Heiko,
On 09/02/2015 10:15 AM, Yakir Yang wrote:
Hi Heiko,
在 09/02/2015 05:47 AM, Heiko Stuebner 写道:
Hi Yakir,
Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang:
The Samsung Exynos eDP controller and Rockchip RK3288 eDP
controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM ;)
Beyond that, there are three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are
different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
debug
register).
I have verified this series on two kinds of rockchip platform board,
one
is rk3288 sdk board which connect with a 2K display port monitor, the
other
is google jerry chromebook which connect with a eDP screen
"cnm,n116bgeea2",
both of them works rightlly.
it looks like during the rebase something did go wrong and I found some
issues
I mentioned in the replies to individual patches.
I did prepare a branch based on mainline [0] with both the old and the
new edp
driver - rk3288_veyron_defconfig build both drivers into the image.
While the old driver still works, I wasn't able to make the new one work
yet
... the drm core does find the connector, but not that anything is
connected
to it. I'll try to dig deeper tomorrow, but maybe you'll see anything
interesting before then.
Many thanks for your comment and debug, I would rebase on your
"edp-with-veyron" branch and fix the broken, make sure v6 would
work rightly at least in your side and my side.
Just like we talk off line, I guess there are two tricky questions which
make analogix_dp just crash/failed on rockchip platform:
- One is how to reach a agreement with the common way to register
connector. There would be a conflict with Exynos & IMX & Rockchip.
On analogix_dp thread, Exynos want to register connector when that
connector is ready.
On dw_hdmi thread, IMX want to register connector when all component is
already.
So Exynos & IMX & Rockchip should reach a common way to register
connector to fix this issue.
- The other is atomic API.
The rockchip drm haven't implemented the atomic API, but the original
exynos_dp have used the atomic API on connector helper function. That's why
analogix_dp just keep crash on your side.
There's really no reason not to convert Rockchip to atomic. It will have
to happen eventually anyway.
Do agree on this point, and I see Tomasz Figa have done some WIP
works on implementing the atomic_commit, maybe would upstream
in further.(https://chromium-review.googlesource.com/#/c/284560/1)
That said, there's another option that would allow you to side-step both
of the above problems at the same time. If you turn the common code into
a helper library that should give you enough flexibility to integrate it
into all existing users. For example you could leave out the connector
registration and let the drivers do that. Similarly since the helpers
are only hooked up at registration time you could probably find a way to
share the low-level code but again leave it up to the drivers to glue it
all together at registration time (drivers could wrap the low-level code
with atomic or non-atomic callbacks).
Wow, sounds good, but I'm not sure I understand this rightly. Do you
mean that I could support two kinds of callbacks in analogix_dp_core
driver, and export them out. And move the connector registration code
into the helper driver (like exynos_dp.c), so helper driver could chose to
use the atomic or non-atomic callbacks. like:
-- analogix_dp_core.c
...
struct drm_connector_funcs analogix_dp_connector_atomic_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = analogix_dp_detect,
.destroy = analogix_dp_connector_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state =
drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
EXPORT_SYMBOL(analogix_dp_connector_atomic_funcs);
struct drm_connector_funcs analogix_dp_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = analogix_dp_detect,
.destroy = analogix_dp_connector_destroy,
};
EXPORT_SYMBOL(analogix_dp_connector_funcs);
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
On Mon, Sep 21, 2015 at 06:27:40PM +0800, Yakir Yang wrote:
> Hi Thierry,
>
> Thanks for your suggest :)
>
> On 09/21/2015 05:15 PM, Thierry Reding wrote:
> >On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote:
> >>Hi Heiko,
> >>
> >>On 09/02/2015 10:15 AM, Yakir Yang wrote:
> >>>Hi Heiko,
> >>>
> >>>在 09/02/2015 05:47 AM, Heiko Stuebner 写道:
> Hi Yakir,
>
> Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang:
> >The Samsung Exynos eDP controller and Rockchip RK3288 eDP
> >controller
> >share the same IP, so a lot of parts can be re-used. I split the common
> >code into bridge directory, then rk3288 and exynos only need to keep
> >some platform code. Cause I can't find the exact IP name of exynos dp
> >controller, so I decide to name dp core driver with "analogix" which I
> >find in rk3288 eDP TRM ;)
> >
> >Beyond that, there are three light registers setting differents bewteen
> >exynos and rk3288.
> >1. RK3288 have five special pll resigters which not indicata in exynos
> >dp controller.
> >2. The address of DP_PHY_PD(dp phy power manager register) are
> >different
> >between rk3288 and exynos.
> >3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
> >debug
> >register).
> >
> >I have verified this series on two kinds of rockchip platform board,
> >one
> >is rk3288 sdk board which connect with a 2K display port monitor, the
> >other
> >is google jerry chromebook which connect with a eDP screen
> >"cnm,n116bgeea2",
> >both of them works rightlly.
> it looks like during the rebase something did go wrong and I found some
> issues
> I mentioned in the replies to individual patches.
>
> I did prepare a branch based on mainline [0] with both the old and the
> new edp
> driver - rk3288_veyron_defconfig build both drivers into the image.
>
> While the old driver still works, I wasn't able to make the new one work
> yet
> ... the drm core does find the connector, but not that anything is
> connected
> to it. I'll try to dig deeper tomorrow, but maybe you'll see anything
> interesting before then.
> >>>Many thanks for your comment and debug, I would rebase on your
> >>>"edp-with-veyron" branch and fix the broken, make sure v6 would
> >>>work rightly at least in your side and my side.
> >>Just like we talk off line, I guess there are two tricky questions which
> >>make analogix_dp just crash/failed on rockchip platform:
> >>
> >>- One is how to reach a agreement with the common way to register
> >>connector. There would be a conflict with Exynos & IMX & Rockchip.
> >> On analogix_dp thread, Exynos want to register connector when that
> >>connector is ready.
> >> On dw_hdmi thread, IMX want to register connector when all component
> >> is
> >>already.
> >> So Exynos & IMX & Rockchip should reach a common way to register
> >>connector to fix this issue.
> >>
> >>- The other is atomic API.
> >> The rockchip drm haven't implemented the atomic API, but the original
> >>exynos_dp have used the atomic API on connector helper function. That's why
> >>analogix_dp just keep crash on your side.
> >There's really no reason not to convert Rockchip to atomic. It will have
> >to happen eventually anyway.
>
> Do agree on this point, and I see Tomasz Figa have done some WIP
> works on implementing the atomic_commit, maybe would upstream
> in further.(https://chromium-review.googlesource.com/#/c/284560/1)
>
>
> >That said, there's another option that would allow you to side-step both
> >of the above problems at the same time. If you turn the common code into
> >a helper library that should give you enough flexibility to integrate it
> >into all existing users. For example you could leave out the connector
> >registration and let the drivers do that. Similarly since the helpers
> >are only hooked up at registration time you could probably find a way to
> >share the low-level code but again leave it up to the drivers to glue it
> >all together at registration time (drivers could wrap the low-level code
> >with atomic or non-atomic callbacks).
>
> Wow, sounds good, but I'm not sure I understand this rightly. Do you
> mean that I could support two kinds of callbacks in analogix_dp_core
> driver, and export them out. And move the connector registration code
> into the helper driver (like exynos_dp.c), so helper driver could chose to
> use the atomic or non-atomic callbacks. like:
>
> -- analogix_dp_core.c
>
> ...
> struct drm_connector_funcs analogix_dp_connector_atomic_funcs = {
> .dpms = drm_atomic_helper_connector_dpms,
> .fill_modes = drm_helper_probe_single_connector_modes,
> .detect = analogix_dp_detect,
> .destroy = analogix_dp_connector_destroy,
> .reset =
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
On Mon, Sep 21, 2015 at 04:45:44PM +0800, Yakir Yang wrote: > Hi Heiko, > > On 09/02/2015 10:15 AM, Yakir Yang wrote: > >Hi Heiko, > > > >在 09/02/2015 05:47 AM, Heiko Stuebner 写道: > >>Hi Yakir, > >> > >>Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: > >>>The Samsung Exynos eDP controller and Rockchip RK3288 eDP > >>>controller > >>>share the same IP, so a lot of parts can be re-used. I split the common > >>>code into bridge directory, then rk3288 and exynos only need to keep > >>>some platform code. Cause I can't find the exact IP name of exynos dp > >>>controller, so I decide to name dp core driver with "analogix" which I > >>>find in rk3288 eDP TRM ;) > >>> > >>>Beyond that, there are three light registers setting differents bewteen > >>>exynos and rk3288. > >>>1. RK3288 have five special pll resigters which not indicata in exynos > >>>dp controller. > >>>2. The address of DP_PHY_PD(dp phy power manager register) are > >>>different > >>>between rk3288 and exynos. > >>>3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp > >>>debug > >>>register). > >>> > >>>I have verified this series on two kinds of rockchip platform board, > >>>one > >>>is rk3288 sdk board which connect with a 2K display port monitor, the > >>>other > >>>is google jerry chromebook which connect with a eDP screen > >>>"cnm,n116bgeea2", > >>>both of them works rightlly. > >>it looks like during the rebase something did go wrong and I found some > >>issues > >>I mentioned in the replies to individual patches. > >> > >>I did prepare a branch based on mainline [0] with both the old and the > >>new edp > >>driver - rk3288_veyron_defconfig build both drivers into the image. > >> > >>While the old driver still works, I wasn't able to make the new one work > >>yet > >>... the drm core does find the connector, but not that anything is > >>connected > >>to it. I'll try to dig deeper tomorrow, but maybe you'll see anything > >>interesting before then. > > > >Many thanks for your comment and debug, I would rebase on your > >"edp-with-veyron" branch and fix the broken, make sure v6 would > >work rightly at least in your side and my side. > > Just like we talk off line, I guess there are two tricky questions which > make analogix_dp just crash/failed on rockchip platform: > > - One is how to reach a agreement with the common way to register > connector. There would be a conflict with Exynos & IMX & Rockchip. > On analogix_dp thread, Exynos want to register connector when that > connector is ready. > On dw_hdmi thread, IMX want to register connector when all component is > already. > So Exynos & IMX & Rockchip should reach a common way to register > connector to fix this issue. > > - The other is atomic API. > The rockchip drm haven't implemented the atomic API, but the original > exynos_dp have used the atomic API on connector helper function. That's why > analogix_dp just keep crash on your side. There's really no reason not to convert Rockchip to atomic. It will have to happen eventually anyway. That said, there's another option that would allow you to side-step both of the above problems at the same time. If you turn the common code into a helper library that should give you enough flexibility to integrate it into all existing users. For example you could leave out the connector registration and let the drivers do that. Similarly since the helpers are only hooked up at registration time you could probably find a way to share the low-level code but again leave it up to the drivers to glue it all together at registration time (drivers could wrap the low-level code with atomic or non-atomic callbacks). This option may also have the benefit of loosening the coupling between DRM drivers and the helper code for this IP, which may be handy in case the drivers diverge again in the future, or ease transitions to new API. Thierry signature.asc Description: PGP signature
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Heiko, 在 09/02/2015 05:47 AM, Heiko Stuebner 写道: Hi Yakir, Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller share the same IP, so a lot of parts can be re-used. I split the common code into bridge directory, then rk3288 and exynos only need to keep some platform code. Cause I can't find the exact IP name of exynos dp controller, so I decide to name dp core driver with "analogix" which I find in rk3288 eDP TRM ;) Beyond that, there are three light registers setting differents bewteen exynos and rk3288. 1. RK3288 have five special pll resigters which not indicata in exynos dp controller. 2. The address of DP_PHY_PD(dp phy power manager register) are different between rk3288 and exynos. 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug register). I have verified this series on two kinds of rockchip platform board, one is rk3288 sdk board which connect with a 2K display port monitor, the other is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2", both of them works rightlly. it looks like during the rebase something did go wrong and I found some issues I mentioned in the replies to individual patches. I did prepare a branch based on mainline [0] with both the old and the new edp driver - rk3288_veyron_defconfig build both drivers into the image. While the old driver still works, I wasn't able to make the new one work yet ... the drm core does find the connector, but not that anything is connected to it. I'll try to dig deeper tomorrow, but maybe you'll see anything interesting before then. Many thanks for your comment and debug, I would rebase on your "edp-with-veyron" branch and fix the broken, make sure v6 would work rightly at least in your side and my side. - Yakir Heiko [0] https://github.com/mmind/linux-rockchip/tree/tmp/edp-with-veyron -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Yakir, Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: >The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller > share the same IP, so a lot of parts can be re-used. I split the common > code into bridge directory, then rk3288 and exynos only need to keep > some platform code. Cause I can't find the exact IP name of exynos dp > controller, so I decide to name dp core driver with "analogix" which I > find in rk3288 eDP TRM ;) > > Beyond that, there are three light registers setting differents bewteen > exynos and rk3288. > 1. RK3288 have five special pll resigters which not indicata in exynos >dp controller. > 2. The address of DP_PHY_PD(dp phy power manager register) are different >between rk3288 and exynos. > 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug >register). > > I have verified this series on two kinds of rockchip platform board, one > is rk3288 sdk board which connect with a 2K display port monitor, the other > is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2", > both of them works rightlly. it looks like during the rebase something did go wrong and I found some issues I mentioned in the replies to individual patches. I did prepare a branch based on mainline [0] with both the old and the new edp driver - rk3288_veyron_defconfig build both drivers into the image. While the old driver still works, I wasn't able to make the new one work yet ... the drm core does find the connector, but not that anything is connected to it. I'll try to dig deeper tomorrow, but maybe you'll see anything interesting before then. Heiko [0] https://github.com/mmind/linux-rockchip/tree/tmp/edp-with-veyron -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Heiko, 在 09/02/2015 05:47 AM, Heiko Stuebner 写道: Hi Yakir, Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller share the same IP, so a lot of parts can be re-used. I split the common code into bridge directory, then rk3288 and exynos only need to keep some platform code. Cause I can't find the exact IP name of exynos dp controller, so I decide to name dp core driver with "analogix" which I find in rk3288 eDP TRM ;) Beyond that, there are three light registers setting differents bewteen exynos and rk3288. 1. RK3288 have five special pll resigters which not indicata in exynos dp controller. 2. The address of DP_PHY_PD(dp phy power manager register) are different between rk3288 and exynos. 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug register). I have verified this series on two kinds of rockchip platform board, one is rk3288 sdk board which connect with a 2K display port monitor, the other is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2", both of them works rightlly. it looks like during the rebase something did go wrong and I found some issues I mentioned in the replies to individual patches. I did prepare a branch based on mainline [0] with both the old and the new edp driver - rk3288_veyron_defconfig build both drivers into the image. While the old driver still works, I wasn't able to make the new one work yet ... the drm core does find the connector, but not that anything is connected to it. I'll try to dig deeper tomorrow, but maybe you'll see anything interesting before then. Many thanks for your comment and debug, I would rebase on your "edp-with-veyron" branch and fix the broken, make sure v6 would work rightly at least in your side and my side. - Yakir Heiko [0] https://github.com/mmind/linux-rockchip/tree/tmp/edp-with-veyron -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v4 0/16] Add Analogix Core Display Port Driver
Hi Yakir, Am Dienstag, 1. September 2015, 13:46:11 schrieb Yakir Yang: >The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller > share the same IP, so a lot of parts can be re-used. I split the common > code into bridge directory, then rk3288 and exynos only need to keep > some platform code. Cause I can't find the exact IP name of exynos dp > controller, so I decide to name dp core driver with "analogix" which I > find in rk3288 eDP TRM ;) > > Beyond that, there are three light registers setting differents bewteen > exynos and rk3288. > 1. RK3288 have five special pll resigters which not indicata in exynos >dp controller. > 2. The address of DP_PHY_PD(dp phy power manager register) are different >between rk3288 and exynos. > 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug >register). > > I have verified this series on two kinds of rockchip platform board, one > is rk3288 sdk board which connect with a 2K display port monitor, the other > is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2", > both of them works rightlly. it looks like during the rebase something did go wrong and I found some issues I mentioned in the replies to individual patches. I did prepare a branch based on mainline [0] with both the old and the new edp driver - rk3288_veyron_defconfig build both drivers into the image. While the old driver still works, I wasn't able to make the new one work yet ... the drm core does find the connector, but not that anything is connected to it. I'll try to dig deeper tomorrow, but maybe you'll see anything interesting before then. Heiko [0] https://github.com/mmind/linux-rockchip/tree/tmp/edp-with-veyron -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
