Re: PCI failures during boot

2007-03-12 Thread Francis Moreau 

On 3/12/07, Francis Moreau <[EMAIL PROTECTED]> wrote:

I updated my kernel to 2.6.19-1.2911.6.5.fc6 and unfortunately it
doesn't help, I still have these errors.

I attached the new dmesg, if anybody can give me some hints that would be great.


oops sent it too fast...

with the dmesg this time.
--
Francis
Linux version 2.6.19-1.2911.6.5.fc6 ([EMAIL PROTECTED]) (gcc version 4.1.1 
20070105 (Red Hat 4.1.1-51)) #1 SMP Sun Mar 4 16:05:34 EST 2007
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
 BIOS-e820:  - 0009f800 (usable)
 BIOS-e820: 0009f800 - 000a (reserved)
 BIOS-e820: 000e - 0010 (reserved)
 BIOS-e820: 0010 - 3fe8 (usable)
 BIOS-e820: 3fe8 - 3ff0 (ACPI NVS)
 BIOS-e820: 3ff0 - 4000 (reserved)
 BIOS-e820: e000 - f000 (reserved)
 BIOS-e820: fec0 - fec1 (reserved)
 BIOS-e820: fed0 - fed00400 (reserved)
 BIOS-e820: fed14000 - fed1a000 (reserved)
 BIOS-e820: fed1c000 - fed9 (reserved)
 BIOS-e820: fee0 - fee01000 (reserved)
 BIOS-e820: ff00 - 0001 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261760) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f64e0
ACPI: RSDT (v001 PTLTD  Capell00 0x0604  LTP 0x) @ 
0x3fe85369
ACPI: FADT (v001 Acer   Grape0x0604 LOHR 0x005a) @ 
0x3fe8ce20
ACPI: MADT (v001 Acer   Grape0x0604 LOHR 0x005a) @ 
0x3fe8ce94
ACPI: HPET (v001 Acer   Grape0x0604 LOHR 0x005a) @ 
0x3fe8cefc
ACPI: MCFG (v001 Acer   Grape0x0604 LOHR 0x005a) @ 
0x3fe8cf34
ACPI: MADT (v001 PTLTD   APIC   0x0604  LTP 0x) @ 
0x3fe8cf70
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x0604  LTP 0x0001) @ 
0x3fe8cfd8
ACPI: SSDT (v001 SataRe  SataPri 0x1000 INTL 0x20050228) @ 
0x3fe86a3b
ACPI: SSDT (v001 SataRe  SataSec 0x1000 INTL 0x20050228) @ 
0x3fe863a9
ACPI: SSDT (v001  PmRef  Cpu0Tst 0x3000 INTL 0x20050228) @ 
0x3fe85945
ACPI: SSDT (v001  PmRef  Cpu1Tst 0x3000 INTL 0x20050228) @ 
0x3fe8589f
ACPI: SSDT (v001  PmRefCpuPm 0x3000 INTL 0x20050228) @ 
0x3fe853b9
ACPI: DSDT (v001 Acer   CALISTGA 0x0604 INTL 0x20050228) @ 
0x
No NUMA configuration found
Faking a node at -3fe8
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261760) 1 entries of 3200 used
Bootmem setup node 0 -3fe8
Zone PFN ranges:
  DMA 0 -> 4096
  DMA324096 ->  1048576
  Normal1048576 ->  1048576
early_node_map[2] active PFN ranges
0:0 ->  159
0:  256 ->   261760
On node 0 totalpages: 261663
  DMA zone: 64 pages used for memmap
  DMA zone: 1447 pages reserved
  DMA zone: 2488 pages, LIFO batch:0
  DMA32 zone: 4026 pages used for memmap
  DMA32 zone: 253638 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee0
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec0, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed0
Using ACPI (MADT) for SMP configuration information
Nosave address range: 0009f000 - 000a
Nosave address range: 000a - 000e
Nosave address range: 000e - 0010
Allocating PCI resources starting at 5000 (gap: 4000:a000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 43264 bytes of per cpu data
Built 1 zonelists.  Total pages: 256126
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1020168k/1047040k available (2469k kernel code, 26484k reserved, 1938k 
data, 312k init)
Calibrating delay using timer specific routine.. 3329.48 BogoMIPS (lpj=16647

Re: PCI failures during boot

2007-03-12 Thread Francis Moreau 

Hi,

On 3/9/07, Jim van Wel <[EMAIL PROTECTED]> wrote:

Hi there,

Please try first a newer kernel of FC6.

2.6.19-1.2911.6.5.fc6

That's 2.6.19.7.

That's the newest one.



I updated my kernel to 2.6.19-1.2911.6.5.fc6 and unfortunately it
doesn't help, I still have these errors.

I attached the new dmesg, if anybody can give me some hints that would be great.
--
Francis
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Re: PCI failures during boot

2007-03-09 Thread Jim van Wel 
Hi there,

Please try first a newer kernel of FC6.

2.6.19-1.2911.6.5.fc6

That's 2.6.19.7.

That's the newest one.

Greetings,
Jim,

> Hi,
>
> I just bought a brand new notebook and wanted to install FC6 on it.
Unfornately there are some issues reported by the console during boot.
Here are some reported errors, I attached the full dmesg and other
information just in case.
>
> ACPI: bus type pci registered
> PCI: Using MMCONFIG at e000
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller :00:1f.2
> Boot video device is :01:00.0
> PCI: Transparent bridge - :00:1e.0
> PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try
'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
>
> and later:
>
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report
> PCI: Cannot allocate resource region 7 of bridge :00:1c.0
> PCI: Cannot allocate resource region 8 of bridge :00:1c.0
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
>
> I currently can't update my kernel version and I'm running a
> 2.6.18-1.2798.fc6 kernel.
>
> Could anybody give me some advices please ?
> --
> Francis
>



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/