Re: USB Storage problem (usb hangs)
Sebastian, Try upgrading to 2.6.11-rc2-mm4 or newer, I've had better luck with my USB/Firewire external case on there. Just make sure you don't turn on usb-storage logging, it's way too verbose for general use! John - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
USB Storage problem (usb hangs)
Hi. The device is: USB2.0 to IDE 3.5" hard disk enclosure. Producer: Seven. Part of /var/log/messages with USB debug enabled in kernel is attached to this email. Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log). Distribution: Gentoo. I'm not subscribed to the list, pleas CC me. -- Regards Sebastian Fabrycki [EMAIL PROTECTED] Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected Jan 10 23:34:30 globtel usb-storage: -- associate_dev Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002 Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE Jan 10 23:34:30 globtel usb-storage: Transport: Bulk Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value= index=00 len=1 Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0 Jan 10 23:34:30 globtel usb-storage: *** thread sleeping. Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices Jan 10 23:34:30 globtel usb-storage: queuecommand called Jan 10 23:34:30 globtel usb-storage: *** thread awakened. Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0 Jan 10 23:34:30 globtel usb-storage: *** thread sleeping. Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002 Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02 Jan 10 23:34:30 globtel usb-storage: queuecommand called Jan 10 23:34:30 globtel usb-storage: *** thread awakened. Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes) Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00 Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31 Jan 10 23:34:30 globtel usb-storage: -- transfer complete Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0 Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW... Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci:00/:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist Jan 10 23:35:00 globtel usb-storage: command_abort called Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called Jan 10 23:35:00 globtel usb-storage: -- cancelling URB Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13 Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4 Jan 10 23:35:00 globtel usb-storage: -- command was aborted Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value= index=00 len=0 Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104 Jan 10 23:35:20 globtel usb-storage: scsi command aborted Jan 10 23:35:20 globtel usb-storage: *** thread sleeping. Jan 10 23:35:20 globtel usb-storage: queuecommand called Jan 10 23:35:20 globtel usb-storage: *** thread awakened. Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes) Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00 Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31 Jan 10 23:35:20 globtel usb-storage: -- transfer complete Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0 Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW... Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Jan 10 23:35:30 globtel usb-storage: command_abort called Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called Jan 10 23:35:30 globtel usb-storage: -- cancelling URB Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13 Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4 Jan 10 23:35:30 globtel usb-storage: -- command was aborted Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value= index=00 len=0 Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104 Jan 10 23:35:50 globtel usb-storage: scsi command aborted Jan 10 23:35:50 globtel usb-storage: *** thread sleeping. Jan 10 23:35:50 globtel usb-storage: device_reset call
Re: USB Storage problem (usb hangs)
> "John" == John Stoffel <[EMAIL PROTECTED]> writes: me> Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log). me> Distribution: Gentoo. John> Try upgrading to 2.6.11-rc2-mm2 or newer, I've found that usb-storage John> works a bit better here, though I haven't confirmed this without debug John> enabled in the usb-storage driver yet. John> Maybe later tonight if I get a chance to reboot. Just another note, 2.6.11-rc2-mm2 without USB-STORAGE debugging turned on passes an 'iozone -a' test on my 40gb WD firewire/USB enclosure under USB 2.0 interface. Now to swap in the problematic 120gb WD drive and see if that works under USB as well as firewire too. John - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: USB Storage problem (usb hangs)
me> The device is: USB2.0 to IDE 3.5" hard disk enclosure. me> Producer: Seven. me> Part of /var/log/messages with USB debug enabled in kernel is me> attached to this email. me> Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log). me> Distribution: Gentoo. Try upgrading to 2.6.11-rc2-mm2 or newer, I've found that usb-storage works a bit better here, though I haven't confirmed this without debug enabled in the usb-storage driver yet. Maybe later tonight if I get a chance to reboot. John - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
USB Storage problem (usb hangs)
Hi. The device is: USB2.0 to IDE 3.5" hard disk enclosure. Producer: Seven. Part of /var/log/messages with USB debug enabled in kernel is attached to this email. Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log). Distribution: Gentoo. I'm not subscribed to the list, pleas CC me. -- Regards Sebastian Fabrycki [EMAIL PROTECTED] -- Sprawdz NOWE parametry hostingu! >> http://link.interia.pl/f1857 << Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected Jan 10 23:34:30 globtel usb-storage: -- associate_dev Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002 Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE Jan 10 23:34:30 globtel usb-storage: Transport: Bulk Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value= index=00 len=1 Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0 Jan 10 23:34:30 globtel usb-storage: *** thread sleeping. Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices Jan 10 23:34:30 globtel usb-storage: queuecommand called Jan 10 23:34:30 globtel usb-storage: *** thread awakened. Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0 Jan 10 23:34:30 globtel usb-storage: *** thread sleeping. Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002 Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02 Jan 10 23:34:30 globtel usb-storage: queuecommand called Jan 10 23:34:30 globtel usb-storage: *** thread awakened. Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes) Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00 Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31 Jan 10 23:34:30 globtel usb-storage: -- transfer complete Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0 Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW... Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci:00/:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist Jan 10 23:35:00 globtel usb-storage: command_abort called Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called Jan 10 23:35:00 globtel usb-storage: -- cancelling URB Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13 Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4 Jan 10 23:35:00 globtel usb-storage: -- command was aborted Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value= index=00 len=0 Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104 Jan 10 23:35:20 globtel usb-storage: scsi command aborted Jan 10 23:35:20 globtel usb-storage: *** thread sleeping. Jan 10 23:35:20 globtel usb-storage: queuecommand called Jan 10 23:35:20 globtel usb-storage: *** thread awakened. Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes) Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00 Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31 Jan 10 23:35:20 globtel usb-storage: -- transfer complete Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0 Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW... Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Jan 10 23:35:30 globtel usb-storage: command_abort called Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called Jan 10 23:35:30 globtel usb-storage: -- cancelling URB Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13 Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4 Jan 10 23:35:30 globtel usb-storage: -- command was aborted Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value= index=00 len=0 Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104 Jan 10 23:35:50 globtel usb-stora
