Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Sonntag 18 Februar 2007 schrieb Prakash Punnoor: > Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: > > Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: > > > Hi, > > > > > > I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card > > > connected via cf to IDE adapteer to onboard ide of nforce c51. I am > > > usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped > > > to pio4: > > > > > > ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > > ata3.00: (BMDMA stat 0x65) > > > ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data > > > 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM > > > violation) ata3: soft resetting port > > > ata3.00: simplex DMA is claimed by other device, disabling DMA > > > ata3.00: configured for PIO4 > > > ata3: EH complete > > > SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) > > > sdb: Write Protect is off > > > sdb: Mode Sense: 00 3a 00 00 > > > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't > > > support DPO or FUA > > [...] > > > The ide driver worked better - for a short time and then this happens: > > > > hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } > > ide: failed opcode was: unknown > > hda: DMA disabled > > I connected the cf to ide adapter to an ide to sata adapter and using this > combination on sata_nv makes no troubkes whatsoever. So what goues wrong > with pata_amd/amd ide driver? BTW, I found specs for the cf card on the > sandisk website. Perhaps someone wants to check whether the amd drivers > deal corretcly with the true ide mode implemented in the cf card? > > http://www.sandisk.com/Assets/File/OEM/Manuals/ProdManCFlashv11.0.pdf For what it's worth: I tried the cd-ide adapter with the sandisk cf on another machine with ide uli/ali driver and here I don't have any problems as well. So everything points to amd driver... -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpb8koZZyXqc.pgp Description: PGP signature
Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Sonntag 18 Februar 2007 schrieb Prakash Punnoor: Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: Hi, I tried a cat /dev/sdb1 /dev/null from a Sandisk Extreme III CF card connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [...] The ide driver worked better - for a short time and then this happens: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: DMA disabled I connected the cf to ide adapter to an ide to sata adapter and using this combination on sata_nv makes no troubkes whatsoever. So what goues wrong with pata_amd/amd ide driver? BTW, I found specs for the cf card on the sandisk website. Perhaps someone wants to check whether the amd drivers deal corretcly with the true ide mode implemented in the cf card? http://www.sandisk.com/Assets/File/OEM/Manuals/ProdManCFlashv11.0.pdf For what it's worth: I tried the cd-ide adapter with the sandisk cf on another machine with ide uli/ali driver and here I don't have any problems as well. So everything points to amd driver... -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpb8koZZyXqc.pgp Description: PGP signature
Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: > Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: > > Hi, > > > > I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card > > connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf > > 2.6.20 on x86_64. For a few seconds it worked but then it dropped to > > pio4: > > > > ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata3.00: (BMDMA stat 0x65) > > ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 > > in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) > > ata3: soft resetting port > > ata3.00: simplex DMA is claimed by other device, disabling DMA > > ata3.00: configured for PIO4 > > ata3: EH complete > > SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) > > sdb: Write Protect is off > > sdb: Mode Sense: 00 3a 00 00 > > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't > > support DPO or FUA > > [...] > > The ide driver worked better - for a short time and then this happens: > > hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } > ide: failed opcode was: unknown > hda: DMA disabled I connected the cf to ide adapter to an ide to sata adapter and using this combination on sata_nv makes no troubkes whatsoever. So what goues wrong with pata_amd/amd ide driver? BTW, I found specs for the cf card on the sandisk website. Perhaps someone wants to check whether the amd drivers deal corretcly with the true ide mode implemented in the cf card? http://www.sandisk.com/Assets/File/OEM/Manuals/ProdManCFlashv11.0.pdf scsi 1:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: Attached scsi removable disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpYZjLkm4oVW.pgp Description: PGP signature
Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: Hi, I tried a cat /dev/sdb1 /dev/null from a Sandisk Extreme III CF card connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [...] The ide driver worked better - for a short time and then this happens: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: DMA disabled I connected the cf to ide adapter to an ide to sata adapter and using this combination on sata_nv makes no troubkes whatsoever. So what goues wrong with pata_amd/amd ide driver? BTW, I found specs for the cf card on the sandisk website. Perhaps someone wants to check whether the amd drivers deal corretcly with the true ide mode implemented in the cf card? http://www.sandisk.com/Assets/File/OEM/Manuals/ProdManCFlashv11.0.pdf scsi 1:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: Attached scsi removable disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpYZjLkm4oVW.pgp Description: PGP signature
Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: > Hi, > > I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card > connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf > 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: > > ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata3.00: (BMDMA stat 0x65) > ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 > in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: > soft resetting port > ata3.00: simplex DMA is claimed by other device, disabling DMA > ata3.00: configured for PIO4 > ata3: EH complete > SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > > > While boot I get: > sata_nv :00:0e.0: version 3.2 > ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 > ACPI: PCI Interrupt :00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) > -> IRQ 22 > PCI: Setting latency timer of device :00:0e.0 to 64 > ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 > ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 > scsi0 : sata_nv > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 1 > ata1.00: configured for UDMA/133 > scsi1 : sata_nv > ata2: SATA link down (SStatus 0 SControl 300) > ATA: abnormal status 0x7F on port 0x977 > scsi 0:0:0:0: Direct-Access ATA Maxtor 7V300F0 VA11 PQ: 0 ANSI: > 5 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 > sd 0:0:0:0: Attached scsi disk sda > sd 0:0:0:0: Attached scsi generic sg0 type 0 > pata_amd :00:0d.0: version 0.2.7 > PCI: Setting latency timer of device :00:0d.0 to 64 > ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 > ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 > scsi2 : pata_amd > ata3.00: CFA, max MWDMA2, 2001888 sectors: LBA > ata3.00: ata3: dev 0 multi count 0 > ata3.00: configured for MWDMA2 > scsi3 : pata_amd > ata4: port disabled. ignoring. > ata4: reset failed, giving up > scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: > 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support > DPO or FUA > sdb: sdb1 > sd 2:0:0:0: Attached scsi removable disk sdb > sd 2:0:0:0: Attached scsi generic sg1 type 0 The ide driver worked better - for a short time and then this happens: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: DMA disabled Any idea? -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpb7iLmg1VQd.pgp Description: PGP signature
exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Hi, I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA While boot I get: sata_nv :00:0e.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt :00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device :00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA Maxtor 7V300F0 VA11 PQ: 0 ANSI: 5 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_amd :00:0d.0: version 0.2.7 PCI: Setting latency timer of device :00:0d.0 to 64 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi2 : pata_amd ata3.00: CFA, max MWDMA2, 2001888 sectors: LBA ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for MWDMA2 scsi3 : pata_amd ata4: port disabled. ignoring. ata4: reset failed, giving up scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpI7YX8eVN2j.pgp Description: PGP signature
exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Hi, I tried a cat /dev/sdb1 /dev/null from a Sandisk Extreme III CF card connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA While boot I get: sata_nv :00:0e.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt :00:0e.0[A] - Link [APSI] - GSI 22 (level, low) - IRQ 22 PCI: Setting latency timer of device :00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA Maxtor 7V300F0 VA11 PQ: 0 ANSI: 5 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda5 sda6 sda7 sda8 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_amd :00:0d.0: version 0.2.7 PCI: Setting latency timer of device :00:0d.0 to 64 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi2 : pata_amd ata3.00: CFA, max MWDMA2, 2001888 sectors: LBA ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for MWDMA2 scsi3 : pata_amd ata4: port disabled. ignoring. ata4: reset failed, giving up scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpI7YX8eVN2j.pgp Description: PGP signature
Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd
Am Samstag 17 Februar 2007 schrieb Prakash Punnoor: Hi, I tried a cat /dev/sdb1 /dev/null from a Sandisk Extreme III CF card connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA While boot I get: sata_nv :00:0e.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt :00:0e.0[A] - Link [APSI] - GSI 22 (level, low) - IRQ 22 PCI: Setting latency timer of device :00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA Maxtor 7V300F0 VA11 PQ: 0 ANSI: 5 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda5 sda6 sda7 sda8 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_amd :00:0d.0: version 0.2.7 PCI: Setting latency timer of device :00:0d.0 to 64 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi2 : pata_amd ata3.00: CFA, max MWDMA2, 2001888 sectors: LBA ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for MWDMA2 scsi3 : pata_amd ata4: port disabled. ignoring. ata4: reset failed, giving up scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 The ide driver worked better - for a short time and then this happens: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: DMA disabled Any idea? -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V pgpb7iLmg1VQd.pgp Description: PGP signature