Re: media: i2c: add OV02A10 image sensor driver

2020-12-04 Thread Sakari Ailus
On Thu, Dec 03, 2020 at 08:30:03PM +0200, Andy Shevchenko wrote:
> On Thu, Dec 3, 2020 at 8:24 PM Colin Ian King  
> wrote:
> > On 03/12/2020 18:10, Andy Shevchenko wrote:
> > > On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  
> > > wrote:
> > >
> > >> Static analysis on linux-next with Coverity has detected an issue with
> > >> the following commit:
> > >
> > > If you want to fix it properly, see my comments below...
> > >
> > >> 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> > >> 530 {
> > >> 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > >> 532struct i2c_client *client =
> > >> v4l2_get_subdevdata(&ov02a10->subdev);
> > >>
> > >>1. var_decl: Declaring variable ret without initializer.
> > >>
> > >> 533int ret;
> > >> 534
> > >> 535mutex_lock(&ov02a10->mutex);
> > >> 536
> > >>
> > >>2. Condition ov02a10->streaming == on, taking true branch.
> > >>
> > >> 537if (ov02a10->streaming == on)
> > >>
> > >>3. Jumping to label unlock_and_return.
> > >>
> > >> 538goto unlock_and_return;
> > >> 539
> > >> 540if (on) {
> > >> 541ret = pm_runtime_get_sync(&client->dev);
> > >> 542if (ret < 0) {
> > >
> > >> 543pm_runtime_put_noidle(&client->dev);
> > >> 544goto unlock_and_return;
> > >
> > > Instead of two above:
> > >goto err_rpm_put;
> > >
> > >> 545}
> > >> 546
> > >> 547ret = __ov02a10_start_stream(ov02a10);
> > >> 548if (ret) {
> > >> 549__ov02a10_stop_stream(ov02a10);
> > >> 550ov02a10->streaming = !on;
> > >> 551goto err_rpm_put;
> > >> 552}
> > >> 553} else {
> > >> 554__ov02a10_stop_stream(ov02a10);
> > >> 555pm_runtime_put(&client->dev);
> > >> 556}
> > >> 557
> > >> 558ov02a10->streaming = on;
> > >
> > > (1)
> > >
> > >> 559mutex_unlock(&ov02a10->mutex);
> > >> 560
> > >> 561return 0;
> > >> 562
> > >> 563 err_rpm_put:
> > >> 564pm_runtime_put(&client->dev);
> > >
> > >> 565 unlock_and_return:
> > >
> > > Should be moved to (1).
> > >
> > >> 566mutex_unlock(&ov02a10->mutex);
> > >> 567
> > >>
> > >> Uninitialized scalar variable (UNINIT)
> > >> 4. uninit_use: Using uninitialized value ret.
> > >>
> > >> 568return ret;
> > >> 569 }
> > >>
> > >> Variable ret has not been initialized, so the error return value is a
> > >> garbage value. It should be initialized with some appropriate negative
> > >> error code, or ret could be removed and the return should return a
> > >> literal value of a error code.
> > >>
> > >> I was unsure what value is appropriate to fix this, so instead I'm
> > >> reporting this issue.
> > >
> > Not sure I fully understand how that fixes it.
> 
> If you are not sure and have no means to test, then don't bother. This
> is not the priority driver anyway.

Arnd sent a patch to address this:

https://patchwork.linuxtv.org/project/linux-media/patch/20201204082037.1658297-1-a...@kernel.org/>

-- 
Sakari Ailus


Re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Tomasz Figa
On Fri, Dec 4, 2020 at 11:47 AM Dongchun Zhu  wrote:
>
> Hi Andy,
>
> On Thu, 2020-12-03 at 20:10 +0200, Andy Shevchenko wrote:
> > On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  
> > wrote:
> >
> > > Static analysis on linux-next with Coverity has detected an issue with
> > > the following commit:
> >
> > If you want to fix it properly, see my comments below...
> >
> > > 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> > > 530 {
> > > 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > > 532struct i2c_client *client =
> > > v4l2_get_subdevdata(&ov02a10->subdev);
> > >
> > >1. var_decl: Declaring variable ret without initializer.
> > >
> > > 533int ret;
> > > 534
> > > 535mutex_lock(&ov02a10->mutex);
> > > 536
> > >
> > >2. Condition ov02a10->streaming == on, taking true branch.
> > >
> > > 537if (ov02a10->streaming == on)
> > >
> > >3. Jumping to label unlock_and_return.
> > >
> > > 538goto unlock_and_return;
> > > 539
> > > 540if (on) {
> > > 541ret = pm_runtime_get_sync(&client->dev);
> > > 542if (ret < 0) {
> >
> > > 543pm_runtime_put_noidle(&client->dev);
> > > 544goto unlock_and_return;
> >
> > Instead of two above:
>
> From the document, pm_runtime_put_noidle is to decrease the runtime PM
> usage counter of a device unless it is 0 already; while pm_runtime_put
> would additionally run pm_request_idle to turn off the power if usage
> counter is zero.
>
> So here maybe we can really use pm_runtime_put instead of
> pm_runtime_put_noidle, although it seems that 'pm_runtime_get_sync' and
> 'pm_runtime_put_noidle' often appear in pairs.
>

In an error state (e.g. if pm_runtime_get_sync() fails),
pm_runtime_put() would decrement the usage counter and call rpm_idle()
which would instantly return an error code. The end result would be
the same, except that pm_runtime_put() would return a non-zero error
code, but we ignore it anyway. However strange it looks, this seems to
be an API guarantee, so Andy's suggestion is correct.

Best regards,
Tomasz

> >goto err_rpm_put;
> >
> > > 545}
> > > 546
> > > 547ret = __ov02a10_start_stream(ov02a10);
> > > 548if (ret) {
> > > 549__ov02a10_stop_stream(ov02a10);
> > > 550ov02a10->streaming = !on;
> > > 551goto err_rpm_put;
> > > 552}
> > > 553} else {
> > > 554__ov02a10_stop_stream(ov02a10);
> > > 555pm_runtime_put(&client->dev);
> > > 556}
> > > 557
> > > 558ov02a10->streaming = on;
> >
> > (1)
> >
> > > 559mutex_unlock(&ov02a10->mutex);
> > > 560
> > > 561return 0;
> > > 562
> > > 563 err_rpm_put:
> > > 564pm_runtime_put(&client->dev);
> >
> > > 565 unlock_and_return:
> >
> > Should be moved to (1).
> >
> > > 566mutex_unlock(&ov02a10->mutex);
> > > 567
> > >
> > > Uninitialized scalar variable (UNINIT)
> > > 4. uninit_use: Using uninitialized value ret.
> > >
> > > 568return ret;
> > > 569 }
> > >
> > > Variable ret has not been initialized, so the error return value is a
> > > garbage value. It should be initialized with some appropriate negative
> > > error code, or ret could be removed and the return should return a
> > > literal value of a error code.
> > >
> > > I was unsure what value is appropriate to fix this, so instead I'm
> > > reporting this issue.
> >
>


Re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Dongchun Zhu
Hi Andy,

On Thu, 2020-12-03 at 20:10 +0200, Andy Shevchenko wrote:
> On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  
> wrote:
> 
> > Static analysis on linux-next with Coverity has detected an issue with
> > the following commit:
> 
> If you want to fix it properly, see my comments below...
> 
> > 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> > 530 {
> > 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
> > 532struct i2c_client *client =
> > v4l2_get_subdevdata(&ov02a10->subdev);
> >
> >1. var_decl: Declaring variable ret without initializer.
> >
> > 533int ret;
> > 534
> > 535mutex_lock(&ov02a10->mutex);
> > 536
> >
> >2. Condition ov02a10->streaming == on, taking true branch.
> >
> > 537if (ov02a10->streaming == on)
> >
> >3. Jumping to label unlock_and_return.
> >
> > 538goto unlock_and_return;
> > 539
> > 540if (on) {
> > 541ret = pm_runtime_get_sync(&client->dev);
> > 542if (ret < 0) {
> 
> > 543pm_runtime_put_noidle(&client->dev);
> > 544goto unlock_and_return;
> 
> Instead of two above:

From the document, pm_runtime_put_noidle is to decrease the runtime PM
usage counter of a device unless it is 0 already; while pm_runtime_put
would additionally run pm_request_idle to turn off the power if usage
counter is zero.

So here maybe we can really use pm_runtime_put instead of
pm_runtime_put_noidle, although it seems that 'pm_runtime_get_sync' and
'pm_runtime_put_noidle' often appear in pairs.

>goto err_rpm_put;
> 
> > 545}
> > 546
> > 547ret = __ov02a10_start_stream(ov02a10);
> > 548if (ret) {
> > 549__ov02a10_stop_stream(ov02a10);
> > 550ov02a10->streaming = !on;
> > 551goto err_rpm_put;
> > 552}
> > 553} else {
> > 554__ov02a10_stop_stream(ov02a10);
> > 555pm_runtime_put(&client->dev);
> > 556}
> > 557
> > 558ov02a10->streaming = on;
> 
> (1)
> 
> > 559mutex_unlock(&ov02a10->mutex);
> > 560
> > 561return 0;
> > 562
> > 563 err_rpm_put:
> > 564pm_runtime_put(&client->dev);
> 
> > 565 unlock_and_return:
> 
> Should be moved to (1).
> 
> > 566mutex_unlock(&ov02a10->mutex);
> > 567
> >
> > Uninitialized scalar variable (UNINIT)
> > 4. uninit_use: Using uninitialized value ret.
> >
> > 568return ret;
> > 569 }
> >
> > Variable ret has not been initialized, so the error return value is a
> > garbage value. It should be initialized with some appropriate negative
> > error code, or ret could be removed and the return should return a
> > literal value of a error code.
> >
> > I was unsure what value is appropriate to fix this, so instead I'm
> > reporting this issue.
> 



Re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Andy Shevchenko
On Thu, Dec 3, 2020 at 8:24 PM Colin Ian King  wrote:
> On 03/12/2020 18:10, Andy Shevchenko wrote:
> > On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  
> > wrote:
> >
> >> Static analysis on linux-next with Coverity has detected an issue with
> >> the following commit:
> >
> > If you want to fix it properly, see my comments below...
> >
> >> 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> >> 530 {
> >> 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
> >> 532struct i2c_client *client =
> >> v4l2_get_subdevdata(&ov02a10->subdev);
> >>
> >>1. var_decl: Declaring variable ret without initializer.
> >>
> >> 533int ret;
> >> 534
> >> 535mutex_lock(&ov02a10->mutex);
> >> 536
> >>
> >>2. Condition ov02a10->streaming == on, taking true branch.
> >>
> >> 537if (ov02a10->streaming == on)
> >>
> >>3. Jumping to label unlock_and_return.
> >>
> >> 538goto unlock_and_return;
> >> 539
> >> 540if (on) {
> >> 541ret = pm_runtime_get_sync(&client->dev);
> >> 542if (ret < 0) {
> >
> >> 543pm_runtime_put_noidle(&client->dev);
> >> 544goto unlock_and_return;
> >
> > Instead of two above:
> >goto err_rpm_put;
> >
> >> 545}
> >> 546
> >> 547ret = __ov02a10_start_stream(ov02a10);
> >> 548if (ret) {
> >> 549__ov02a10_stop_stream(ov02a10);
> >> 550ov02a10->streaming = !on;
> >> 551goto err_rpm_put;
> >> 552}
> >> 553} else {
> >> 554__ov02a10_stop_stream(ov02a10);
> >> 555pm_runtime_put(&client->dev);
> >> 556}
> >> 557
> >> 558ov02a10->streaming = on;
> >
> > (1)
> >
> >> 559mutex_unlock(&ov02a10->mutex);
> >> 560
> >> 561return 0;
> >> 562
> >> 563 err_rpm_put:
> >> 564pm_runtime_put(&client->dev);
> >
> >> 565 unlock_and_return:
> >
> > Should be moved to (1).
> >
> >> 566mutex_unlock(&ov02a10->mutex);
> >> 567
> >>
> >> Uninitialized scalar variable (UNINIT)
> >> 4. uninit_use: Using uninitialized value ret.
> >>
> >> 568return ret;
> >> 569 }
> >>
> >> Variable ret has not been initialized, so the error return value is a
> >> garbage value. It should be initialized with some appropriate negative
> >> error code, or ret could be removed and the return should return a
> >> literal value of a error code.
> >>
> >> I was unsure what value is appropriate to fix this, so instead I'm
> >> reporting this issue.
> >
> Not sure I fully understand how that fixes it.

If you are not sure and have no means to test, then don't bother. This
is not the priority driver anyway.

>  Given that ret is
> currently not initialized when we hit:
>
>  if (ov02a10->streaming == on)
> goto unlock_and_return;
>
> either we initialize ret to 0 at the start of the function, or do:
>
>  if (ov02a10->streaming == on) {
> ret = 0;
> goto unlock_and_return;
> }
>
> (assuming the intention is to return zero for this specific case).

No, please read my message again.

-- 
With Best Regards,
Andy Shevchenko


Re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Colin Ian King
On 03/12/2020 18:10, Andy Shevchenko wrote:
> On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  
> wrote:
> 
>> Static analysis on linux-next with Coverity has detected an issue with
>> the following commit:
> 
> If you want to fix it properly, see my comments below...
> 
>> 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
>> 530 {
>> 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
>> 532struct i2c_client *client =
>> v4l2_get_subdevdata(&ov02a10->subdev);
>>
>>1. var_decl: Declaring variable ret without initializer.
>>
>> 533int ret;
>> 534
>> 535mutex_lock(&ov02a10->mutex);
>> 536
>>
>>2. Condition ov02a10->streaming == on, taking true branch.
>>
>> 537if (ov02a10->streaming == on)
>>
>>3. Jumping to label unlock_and_return.
>>
>> 538goto unlock_and_return;
>> 539
>> 540if (on) {
>> 541ret = pm_runtime_get_sync(&client->dev);
>> 542if (ret < 0) {
> 
>> 543pm_runtime_put_noidle(&client->dev);
>> 544goto unlock_and_return;
> 
> Instead of two above:
>goto err_rpm_put;
> 
>> 545}
>> 546
>> 547ret = __ov02a10_start_stream(ov02a10);
>> 548if (ret) {
>> 549__ov02a10_stop_stream(ov02a10);
>> 550ov02a10->streaming = !on;
>> 551goto err_rpm_put;
>> 552}
>> 553} else {
>> 554__ov02a10_stop_stream(ov02a10);
>> 555pm_runtime_put(&client->dev);
>> 556}
>> 557
>> 558ov02a10->streaming = on;
> 
> (1)
> 
>> 559mutex_unlock(&ov02a10->mutex);
>> 560
>> 561return 0;
>> 562
>> 563 err_rpm_put:
>> 564pm_runtime_put(&client->dev);
> 
>> 565 unlock_and_return:
> 
> Should be moved to (1).
> 
>> 566mutex_unlock(&ov02a10->mutex);
>> 567
>>
>> Uninitialized scalar variable (UNINIT)
>> 4. uninit_use: Using uninitialized value ret.
>>
>> 568return ret;
>> 569 }
>>
>> Variable ret has not been initialized, so the error return value is a
>> garbage value. It should be initialized with some appropriate negative
>> error code, or ret could be removed and the return should return a
>> literal value of a error code.
>>
>> I was unsure what value is appropriate to fix this, so instead I'm
>> reporting this issue.
> 
Not sure I fully understand how that fixes it. Given that ret is
currently not initialized when we hit:

 if (ov02a10->streaming == on)
goto unlock_and_return;

either we initialize ret to 0 at the start of the function, or do:

 if (ov02a10->streaming == on) {
ret = 0;
goto unlock_and_return;
}

(assuming the intention is to return zero for this specific case).

Colin


Re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Andy Shevchenko
On Thu, Dec 3, 2020 at 8:03 PM Colin Ian King  wrote:

> Static analysis on linux-next with Coverity has detected an issue with
> the following commit:

If you want to fix it properly, see my comments below...

> 529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
> 530 {
> 531struct ov02a10 *ov02a10 = to_ov02a10(sd);
> 532struct i2c_client *client =
> v4l2_get_subdevdata(&ov02a10->subdev);
>
>1. var_decl: Declaring variable ret without initializer.
>
> 533int ret;
> 534
> 535mutex_lock(&ov02a10->mutex);
> 536
>
>2. Condition ov02a10->streaming == on, taking true branch.
>
> 537if (ov02a10->streaming == on)
>
>3. Jumping to label unlock_and_return.
>
> 538goto unlock_and_return;
> 539
> 540if (on) {
> 541ret = pm_runtime_get_sync(&client->dev);
> 542if (ret < 0) {

> 543pm_runtime_put_noidle(&client->dev);
> 544goto unlock_and_return;

Instead of two above:
   goto err_rpm_put;

> 545}
> 546
> 547ret = __ov02a10_start_stream(ov02a10);
> 548if (ret) {
> 549__ov02a10_stop_stream(ov02a10);
> 550ov02a10->streaming = !on;
> 551goto err_rpm_put;
> 552}
> 553} else {
> 554__ov02a10_stop_stream(ov02a10);
> 555pm_runtime_put(&client->dev);
> 556}
> 557
> 558ov02a10->streaming = on;

(1)

> 559mutex_unlock(&ov02a10->mutex);
> 560
> 561return 0;
> 562
> 563 err_rpm_put:
> 564pm_runtime_put(&client->dev);

> 565 unlock_and_return:

Should be moved to (1).

> 566mutex_unlock(&ov02a10->mutex);
> 567
>
> Uninitialized scalar variable (UNINIT)
> 4. uninit_use: Using uninitialized value ret.
>
> 568return ret;
> 569 }
>
> Variable ret has not been initialized, so the error return value is a
> garbage value. It should be initialized with some appropriate negative
> error code, or ret could be removed and the return should return a
> literal value of a error code.
>
> I was unsure what value is appropriate to fix this, so instead I'm
> reporting this issue.

-- 
With Best Regards,
Andy Shevchenko


re: media: i2c: add OV02A10 image sensor driver

2020-12-03 Thread Colin Ian King
Hi,

Static analysis on linux-next with Coverity has detected an issue with
the following commit:

529 static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
530 {
531struct ov02a10 *ov02a10 = to_ov02a10(sd);
532struct i2c_client *client =
v4l2_get_subdevdata(&ov02a10->subdev);

   1. var_decl: Declaring variable ret without initializer.

533int ret;
534
535mutex_lock(&ov02a10->mutex);
536

   2. Condition ov02a10->streaming == on, taking true branch.

537if (ov02a10->streaming == on)

   3. Jumping to label unlock_and_return.

538goto unlock_and_return;
539
540if (on) {
541ret = pm_runtime_get_sync(&client->dev);
542if (ret < 0) {
543pm_runtime_put_noidle(&client->dev);
544goto unlock_and_return;
545}
546
547ret = __ov02a10_start_stream(ov02a10);
548if (ret) {
549__ov02a10_stop_stream(ov02a10);
550ov02a10->streaming = !on;
551goto err_rpm_put;
552}
553} else {
554__ov02a10_stop_stream(ov02a10);
555pm_runtime_put(&client->dev);
556}
557
558ov02a10->streaming = on;
559mutex_unlock(&ov02a10->mutex);
560
561return 0;
562
563 err_rpm_put:
564pm_runtime_put(&client->dev);
565 unlock_and_return:
566mutex_unlock(&ov02a10->mutex);
567

Uninitialized scalar variable (UNINIT)
4. uninit_use: Using uninitialized value ret.

568return ret;
569 }

Variable ret has not been initialized, so the error return value is a
garbage value. It should be initialized with some appropriate negative
error code, or ret could be removed and the return should return a
literal value of a error code.

I was unsure what value is appropriate to fix this, so instead I'm
reporting this issue.

Colin