help

[John Klug]

help

[no subject]

[John Klug]

unsubscribe

Fwd: PCTV 800i

[John Klug]

I moved it to a dual boot system, and it works in windows, and the
same error in Linux.

The chips are marked:
Conexant CX23880
Samsung S5H1411
Cirrus   CS5340CZZ
Atmel   ATMLH138

three out of four are a different part number than the Wiki.

It is Board T1213044 stamped on back
PCTV 800i Rev 1.1
Shield over tuner says "pctv systems"

There are 5 APL1117 on both sides of the board.

Since the tuner is probably under the shield I don't know a
non-destructive method to get the part number.

>From: Steven Toth 
>Date: Mon, Jan 26, 2015 at 6:44 AM
>Subject: Re: PCTV 800i
>To: John Klug 
>Cc: Linux-Media 


>On Mon, Jan 26, 2015 at 12:50 AM, John Klug  wrote:
>> I have a new PCTV card with CX23880 (not CX23883 as shown in the picture):
>>
>> http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Card_(800i)
>>
>> The description is out of date with respect to my recent card.
>>
>> It did not work in 3.12.20, 3.17.7, and I finally downloaded the
>> latest GIT of media_build to no avail (I have a 2nd card that is CX18,
>> which is interspersed in the output).

>The error messages suggest one or more of the components on the board,
>or their I2C addresses have changed, or that your hardware is bad.

>Other than the Conexant PCI bridge, do the other components listed in
>the wiki page match the components on your physical device?
>
>--
>Steven Toth - Kernel Labs
>http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

PCTV 800i

[John Klug]

I have a new PCTV card with CX23880 (not CX23883 as shown in the picture):

http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Card_(800i)

The description is out of date with respect to my recent card.

It did not work in 3.12.20, 3.17.7, and I finally downloaded the
latest GIT of media_build to no avail (I have a 2nd card that is CX18,
which is interspersed in the output).

All produce the same error:
[   19.895978] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[   19.896343] cx88[0]/0: found at :01:06.0, rev: 5, irq: 18,
latency: 20, mmio: 0xef00
[   19.896438] cx88[0]/0: registered device video2 [v4l2]
[   19.896466] cx88[0]/0: registered device vbi0
[   19.908270] cx88[0]/2: cx2388x 8802 Driver Manager
[   19.908352] cx88[0]/2: found at :01:06.2, rev: 5, irq: 18,
latency: 64, mmio: 0xed00
[   19.926299] cx88/2: cx2388x dvb driver version 1.0.0 loaded
[   19.926303] cx88/2: registering cx8802 driver, type: dvb access: shared
[   19.926305] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV
HD 800i [card=58]
[   19.926307] cx88[0]/2: cx2388x based DVB/ATSC card
[   19.926309] cx8802_alloc_frontends() allocating 1 frontend(s)
[   19.989128] cx18-0: loaded v4l-cx23418-apu.fw firmware V0012
(141200 bytes)
[   19.995285] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[   19.996947] cx88[0]/2: frontend initialization failed
[   19.996950] cx88[0]/2: dvb_register failed (err = -22)
[   19.996951] cx88[0]/2: cx8802 probe failed, err = -22


Here is the output from lspci -vvnn:

01:06.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Pinnacle Systems Inc. Device [11bd:0051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- http://vger.kernel.org/majordomo-info.html