Re: [PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
Hi, Guennadi Thanks for the review. On 8/30/2015 4:48 PM, Guennadi Liakhovetski wrote: Hi Josh, On Wed, 17 Jun 2015, Josh Wu wrote: In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Simpler doesn't necessarily mean better or more correct:) There are other fields in that register and currently the driver preserves them, with this patch you overwrite them with 0. 0 happens to be the reset value of that register. So, you should at least mention that in this patch description, just saying "simpler" doesn't convince me. Correct, I should mention that the reset value (0) of cfg2 means the YUV mode in the commit message. To use YUV mode we need to clear COL_SPACE (bit 15 of CFG2) and since the reset value is 0, so in the code, I didn't need do anything. So, at least I'd modify that, I can do that myself. But in general I'm not even sure why this patch is needed. Yes, currently those fields of that register are unused, so, we can assume they stay at their reset values. But firstly the hardware can change and at some point the reset value can change, or those other fields will get set indirectly by something. Or the driver will change at some point to support more fields of that register and then this code will have to be changed again. I understand your concern. maybe a better solution is explicitly set the COL_SPACE (bit 15) to 0 for the YUV formats. like: #define ISI_CFG2_COL_SPACE_YUV(0 << 15) case MEDIA_BUS_FMT_YVYU8_2X8: cfg2 = ISI_CFG2_COL_SPACE_YUV | ISI_CFG2_YCC_SWAP_MODE_1; break; And above modifications can be sent with RGB format support patch in future. So, I'd ask you again - do you really want this patch? yes, this patch is needed. And in future i will add the RGB format settings. If you insist - I'll take it, but I'd add the "reset value" reasoning. That would be great, thank you very much. Best Regards, Josh Wu Otherwise maybe just drop it? Thanks Guennadi Currently only support YUV format from camera sensor. Signed-off-by: Josh Wu --- drivers/media/platform/soc_camera/atmel-isi.c | 20 +++- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 9070172..8bc40ca 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) static int configure_geometry(struct atmel_isi *isi, u32 width, u32 height, u32 code) { - u32 cfg2, cr; + u32 cfg2; + /* According to sensor's output format to set cfg2 */ switch (code) { /* YUV, including grey */ case MEDIA_BUS_FMT_Y8_1X8: - cr = ISI_CFG2_GRAYSCALE; + cfg2 = ISI_CFG2_GRAYSCALE; break; case MEDIA_BUS_FMT_VYUY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_3; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_3; break; case MEDIA_BUS_FMT_UYVY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_2; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_2; break; case MEDIA_BUS_FMT_YVYU8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_1; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_1; break; case MEDIA_BUS_FMT_YUYV8_2X8: - cr = ISI_CFG2_YCC_SWAP_DEFAULT; + cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT; break; /* RGB, TODO */ default: @@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, u32 width, } isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - - cfg2 = isi_readl(isi, ISI_CFG2); - /* Set YCC swap mode */ - cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK; - cfg2 |= cr; /* Set width */ - cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & ISI_CFG2_IM_HSIZE_MASK; /* Set height */ - cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) & ISI_CFG2_IM_VSIZE_MASK; isi_writel(isi, ISI_CFG2, cfg2); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
Hi Josh, On Wed, 17 Jun 2015, Josh Wu wrote: > In the function configure_geometry(), we will setup the ISI CFG2 > according to the sensor output format. > > It make no sense to just read back the CFG2 register and just set part > of it. > > So just set up this register directly makes things simpler. Simpler doesn't necessarily mean better or more correct:) There are other fields in that register and currently the driver preserves them, with this patch you overwrite them with 0. 0 happens to be the reset value of that register. So, you should at least mention that in this patch description, just saying "simpler" doesn't convince me. So, at least I'd modify that, I can do that myself. But in general I'm not even sure why this patch is needed. Yes, currently those fields of that register are unused, so, we can assume they stay at their reset values. But firstly the hardware can change and at some point the reset value can change, or those other fields will get set indirectly by something. Or the driver will change at some point to support more fields of that register and then this code will have to be changed again. So, I'd ask you again - do you really want this patch? If you insist - I'll take it, but I'd add the "reset value" reasoning. Otherwise maybe just drop it? Thanks Guennadi > Currently only support YUV format from camera sensor. > > Signed-off-by: Josh Wu > --- > > drivers/media/platform/soc_camera/atmel-isi.c | 20 +++- > 1 file changed, 7 insertions(+), 13 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c > index 9070172..8bc40ca 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) > static int configure_geometry(struct atmel_isi *isi, u32 width, > u32 height, u32 code) > { > - u32 cfg2, cr; > + u32 cfg2; > > + /* According to sensor's output format to set cfg2 */ > switch (code) { > /* YUV, including grey */ > case MEDIA_BUS_FMT_Y8_1X8: > - cr = ISI_CFG2_GRAYSCALE; > + cfg2 = ISI_CFG2_GRAYSCALE; > break; > case MEDIA_BUS_FMT_VYUY8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_3; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_3; > break; > case MEDIA_BUS_FMT_UYVY8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_2; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_2; > break; > case MEDIA_BUS_FMT_YVYU8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_1; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_1; > break; > case MEDIA_BUS_FMT_YUYV8_2X8: > - cr = ISI_CFG2_YCC_SWAP_DEFAULT; > + cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT; > break; > /* RGB, TODO */ > default: > @@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, > u32 width, > } > > isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); > - > - cfg2 = isi_readl(isi, ISI_CFG2); > - /* Set YCC swap mode */ > - cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK; > - cfg2 |= cr; > /* Set width */ > - cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); > cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & > ISI_CFG2_IM_HSIZE_MASK; > /* Set height */ > - cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); > cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) > & ISI_CFG2_IM_VSIZE_MASK; > isi_writel(isi, ISI_CFG2, cfg2); > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
Hi Josh, Thank you for the patch. On Wednesday 17 June 2015 18:39:38 Josh Wu wrote: > In the function configure_geometry(), we will setup the ISI CFG2 > according to the sensor output format. > > It make no sense to just read back the CFG2 register and just set part > of it. > > So just set up this register directly makes things simpler. > Currently only support YUV format from camera sensor. > > Signed-off-by: Josh Wu The default value of the register is all 0 so this should be good. Reviewed-by: Laurent Pinchart > --- > > drivers/media/platform/soc_camera/atmel-isi.c | 20 +++- > 1 file changed, 7 insertions(+), 13 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c index 9070172..8bc40ca > 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) > static int configure_geometry(struct atmel_isi *isi, u32 width, > u32 height, u32 code) > { > - u32 cfg2, cr; > + u32 cfg2; > > + /* According to sensor's output format to set cfg2 */ > switch (code) { > /* YUV, including grey */ > case MEDIA_BUS_FMT_Y8_1X8: > - cr = ISI_CFG2_GRAYSCALE; > + cfg2 = ISI_CFG2_GRAYSCALE; > break; > case MEDIA_BUS_FMT_VYUY8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_3; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_3; > break; > case MEDIA_BUS_FMT_UYVY8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_2; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_2; > break; > case MEDIA_BUS_FMT_YVYU8_2X8: > - cr = ISI_CFG2_YCC_SWAP_MODE_1; > + cfg2 = ISI_CFG2_YCC_SWAP_MODE_1; > break; > case MEDIA_BUS_FMT_YUYV8_2X8: > - cr = ISI_CFG2_YCC_SWAP_DEFAULT; > + cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT; > break; > /* RGB, TODO */ > default: > @@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, > u32 width, } > > isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); > - > - cfg2 = isi_readl(isi, ISI_CFG2); > - /* Set YCC swap mode */ > - cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK; > - cfg2 |= cr; > /* Set width */ > - cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); > cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & > ISI_CFG2_IM_HSIZE_MASK; > /* Set height */ > - cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); > cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) > & ISI_CFG2_IM_VSIZE_MASK; > isi_writel(isi, ISI_CFG2, cfg2); -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
Hi, list Ping..., any feedback for this series? Best Regards, Josh Wu On 6/17/2015 6:39 PM, Josh Wu wrote: In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Currently only support YUV format from camera sensor. Signed-off-by: Josh Wu --- drivers/media/platform/soc_camera/atmel-isi.c | 20 +++- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 9070172..8bc40ca 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) static int configure_geometry(struct atmel_isi *isi, u32 width, u32 height, u32 code) { - u32 cfg2, cr; + u32 cfg2; + /* According to sensor's output format to set cfg2 */ switch (code) { /* YUV, including grey */ case MEDIA_BUS_FMT_Y8_1X8: - cr = ISI_CFG2_GRAYSCALE; + cfg2 = ISI_CFG2_GRAYSCALE; break; case MEDIA_BUS_FMT_VYUY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_3; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_3; break; case MEDIA_BUS_FMT_UYVY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_2; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_2; break; case MEDIA_BUS_FMT_YVYU8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_1; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_1; break; case MEDIA_BUS_FMT_YUYV8_2X8: - cr = ISI_CFG2_YCC_SWAP_DEFAULT; + cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT; break; /* RGB, TODO */ default: @@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, u32 width, } isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - - cfg2 = isi_readl(isi, ISI_CFG2); - /* Set YCC swap mode */ - cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK; - cfg2 |= cr; /* Set width */ - cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & ISI_CFG2_IM_HSIZE_MASK; /* Set height */ - cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) & ISI_CFG2_IM_VSIZE_MASK; isi_writel(isi, ISI_CFG2, cfg2); -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH 1/2] media: atmel-isi: setup the ISI_CFG2 register directly
In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Currently only support YUV format from camera sensor. Signed-off-by: Josh Wu --- drivers/media/platform/soc_camera/atmel-isi.c | 20 +++- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 9070172..8bc40ca 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) static int configure_geometry(struct atmel_isi *isi, u32 width, u32 height, u32 code) { - u32 cfg2, cr; + u32 cfg2; + /* According to sensor's output format to set cfg2 */ switch (code) { /* YUV, including grey */ case MEDIA_BUS_FMT_Y8_1X8: - cr = ISI_CFG2_GRAYSCALE; + cfg2 = ISI_CFG2_GRAYSCALE; break; case MEDIA_BUS_FMT_VYUY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_3; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_3; break; case MEDIA_BUS_FMT_UYVY8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_2; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_2; break; case MEDIA_BUS_FMT_YVYU8_2X8: - cr = ISI_CFG2_YCC_SWAP_MODE_1; + cfg2 = ISI_CFG2_YCC_SWAP_MODE_1; break; case MEDIA_BUS_FMT_YUYV8_2X8: - cr = ISI_CFG2_YCC_SWAP_DEFAULT; + cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT; break; /* RGB, TODO */ default: @@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, u32 width, } isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - - cfg2 = isi_readl(isi, ISI_CFG2); - /* Set YCC swap mode */ - cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK; - cfg2 |= cr; /* Set width */ - cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & ISI_CFG2_IM_HSIZE_MASK; /* Set height */ - cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) & ISI_CFG2_IM_VSIZE_MASK; isi_writel(isi, ISI_CFG2, cfg2); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html