Re: [PATCH 1/3] s5p-csis: Handle all available power supplies
Hi Laurent,
On 07/06/2011 11:47 PM, Laurent Pinchart wrote:
> Hi Sylwester,
>
> On Wednesday 06 July 2011 19:13:39 Sylwester Nawrocki wrote:
>> On the SoCs this driver is intended to support the are three
>> separate pins to supply the MIPI-CSIS subsystem: 1.1V or 1.2V,
>> 1.8V and power supply for an internal PLL.
>> This patch adds support for two separate voltage supplies
>> to cover properly board configurations where PMIC requires
>> to configure independently each external supply of the MIPI-CSI
>> device. The 1.8V and PLL supply are assigned a single "vdd18"
>> regulator supply as it seems more reasonable than creating
>> separate regulator supplies for them.
>>
>> Reported-by: HeungJun Kim
>> Signed-off-by: Sylwester Nawrocki
>> Signed-off-by: Kyungmin Park
>> ---
>> drivers/media/video/s5p-fimc/mipi-csis.c | 42
>> + 1 files changed, 25 insertions(+), 17
>> deletions(-)
>>
>> diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c
>> b/drivers/media/video/s5p-fimc/mipi-csis.c index ef056d6..4a529b4 100644
>> --- a/drivers/media/video/s5p-fimc/mipi-csis.c
>> +++ b/drivers/media/video/s5p-fimc/mipi-csis.c
>> @@ -81,6 +81,12 @@ static char *csi_clock_name[] = {
>> };
>> #define NUM_CSIS_CLOCKS ARRAY_SIZE(csi_clock_name)
>>
>> +static const char * const csis_supply_name[] = {
>> +"vdd11", /* 1.1V or 1.2V (s5pc100) MIPI CSI suppply */
>> +"vdd18", /* VDD 1.8V and MIPI CSI PLL supply */
>> +};
>> +#define CSIS_NUM_SUPPLIES ARRAY_SIZE(csis_supply_name)
>> +
>> enum {
>> ST_POWERED = 1,
>> ST_STREAMING= 2,
>> @@ -109,9 +115,9 @@ struct csis_state {
>> struct platform_device *pdev;
>> struct resource *regs_res;
>> void __iomem *regs;
>> +struct regulator_bulk_data supply[CSIS_NUM_SUPPLIES];
>
> I would have called this supplies, but that's nitpicking. Otherwise the patch
> looks good to me.
No problem, I have already renamed it. It seems to make more sense like this.
Thanks for the review!
Regards,
--
Sylwester Nawrocki
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/3] s5p-csis: Handle all available power supplies
Hi Sylwester,
On Wednesday 06 July 2011 19:13:39 Sylwester Nawrocki wrote:
> On the SoCs this driver is intended to support the are three
> separate pins to supply the MIPI-CSIS subsystem: 1.1V or 1.2V,
> 1.8V and power supply for an internal PLL.
> This patch adds support for two separate voltage supplies
> to cover properly board configurations where PMIC requires
> to configure independently each external supply of the MIPI-CSI
> device. The 1.8V and PLL supply are assigned a single "vdd18"
> regulator supply as it seems more reasonable than creating
> separate regulator supplies for them.
>
> Reported-by: HeungJun Kim
> Signed-off-by: Sylwester Nawrocki
> Signed-off-by: Kyungmin Park
> ---
> drivers/media/video/s5p-fimc/mipi-csis.c | 42
> + 1 files changed, 25 insertions(+), 17
> deletions(-)
>
> diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c
> b/drivers/media/video/s5p-fimc/mipi-csis.c index ef056d6..4a529b4 100644
> --- a/drivers/media/video/s5p-fimc/mipi-csis.c
> +++ b/drivers/media/video/s5p-fimc/mipi-csis.c
> @@ -81,6 +81,12 @@ static char *csi_clock_name[] = {
> };
> #define NUM_CSIS_CLOCKS ARRAY_SIZE(csi_clock_name)
>
> +static const char * const csis_supply_name[] = {
> + "vdd11", /* 1.1V or 1.2V (s5pc100) MIPI CSI suppply */
> + "vdd18", /* VDD 1.8V and MIPI CSI PLL supply */
> +};
> +#define CSIS_NUM_SUPPLIES ARRAY_SIZE(csis_supply_name)
> +
> enum {
> ST_POWERED = 1,
> ST_STREAMING= 2,
> @@ -109,9 +115,9 @@ struct csis_state {
> struct platform_device *pdev;
> struct resource *regs_res;
> void __iomem *regs;
> + struct regulator_bulk_data supply[CSIS_NUM_SUPPLIES];
I would have called this supplies, but that's nitpicking. Otherwise the patch
looks good to me.
> struct clk *clock[NUM_CSIS_CLOCKS];
> int irq;
> - struct regulator *supply;
> u32 flags;
> const struct csis_pix_format *csis_fmt;
> struct v4l2_mbus_framefmt format;
> @@ -460,6 +466,7 @@ static int __devinit s5pcsis_probe(struct
> platform_device *pdev) struct resource *regs_res;
> struct csis_state *state;
> int ret = -ENOMEM;
> + int i;
>
> state = kzalloc(sizeof(*state), GFP_KERNEL);
> if (!state)
> @@ -519,13 +526,14 @@ static int __devinit s5pcsis_probe(struct
> platform_device *pdev) goto e_clkput;
> }
>
> + for (i = 0; i < CSIS_NUM_SUPPLIES; i++)
> + state->supply[i].supply = csis_supply_name[i];
> +
> if (!pdata->fixed_phy_vdd) {
> - state->supply = regulator_get(&pdev->dev, "vdd");
> - if (IS_ERR(state->supply)) {
> - ret = PTR_ERR(state->supply);
> - state->supply = NULL;
> + ret = regulator_bulk_get(&pdev->dev, CSIS_NUM_SUPPLIES,
> + state->supply);
> + if (ret)
> goto e_clkput;
> - }
> }
>
> ret = request_irq(state->irq, s5pcsis_irq_handler, 0,
> @@ -561,8 +569,7 @@ static int __devinit s5pcsis_probe(struct
> platform_device *pdev) e_irqfree:
> free_irq(state->irq, state);
> e_regput:
> - if (state->supply)
> - regulator_put(state->supply);
> + regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supply);
> e_clkput:
> clk_disable(state->clock[CSIS_CLK_MUX]);
> s5pcsis_clk_put(state);
> @@ -592,8 +599,9 @@ static int s5pcsis_suspend(struct device *dev)
> ret = pdata->phy_enable(state->pdev, false);
> if (ret)
> goto unlock;
> - if (state->supply) {
> - ret = regulator_disable(state->supply);
> + if (!pdata->fixed_phy_vdd) {
> + ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
> + state->supply);
> if (ret)
> goto unlock;
> }
> @@ -622,16 +630,17 @@ static int s5pcsis_resume(struct device *dev)
> goto unlock;
>
> if (!(state->flags & ST_POWERED)) {
> - if (state->supply)
> - ret = regulator_enable(state->supply);
> + if (!pdata->fixed_phy_vdd)
> + ret = regulator_bulk_enable(CSIS_NUM_SUPPLIES,
> + state->supply);
> if (ret)
> goto unlock;
> -
> ret = pdata->phy_enable(state->pdev, true);
> if (!ret) {
> state->flags |= ST_POWERED;
> - } else if (state->supply) {
> - regulator_disable(state->supply);
> + } else if (!pdata->fixed_phy_vdd) {
> + regulator_bulk_disable(CSIS_NUM_SUPPLIES,
> +state->supply);
> goto unlock;
> }
> clk_enab
[PATCH 1/3] s5p-csis: Handle all available power supplies
On the SoCs this driver is intended to support the are three
separate pins to supply the MIPI-CSIS subsystem: 1.1V or 1.2V,
1.8V and power supply for an internal PLL.
This patch adds support for two separate voltage supplies
to cover properly board configurations where PMIC requires
to configure independently each external supply of the MIPI-CSI
device. The 1.8V and PLL supply are assigned a single "vdd18"
regulator supply as it seems more reasonable than creating
separate regulator supplies for them.
Reported-by: HeungJun Kim
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Kyungmin Park
---
drivers/media/video/s5p-fimc/mipi-csis.c | 42 +
1 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c
b/drivers/media/video/s5p-fimc/mipi-csis.c
index ef056d6..4a529b4 100644
--- a/drivers/media/video/s5p-fimc/mipi-csis.c
+++ b/drivers/media/video/s5p-fimc/mipi-csis.c
@@ -81,6 +81,12 @@ static char *csi_clock_name[] = {
};
#define NUM_CSIS_CLOCKSARRAY_SIZE(csi_clock_name)
+static const char * const csis_supply_name[] = {
+ "vdd11", /* 1.1V or 1.2V (s5pc100) MIPI CSI suppply */
+ "vdd18", /* VDD 1.8V and MIPI CSI PLL supply */
+};
+#define CSIS_NUM_SUPPLIES ARRAY_SIZE(csis_supply_name)
+
enum {
ST_POWERED = 1,
ST_STREAMING= 2,
@@ -109,9 +115,9 @@ struct csis_state {
struct platform_device *pdev;
struct resource *regs_res;
void __iomem *regs;
+ struct regulator_bulk_data supply[CSIS_NUM_SUPPLIES];
struct clk *clock[NUM_CSIS_CLOCKS];
int irq;
- struct regulator *supply;
u32 flags;
const struct csis_pix_format *csis_fmt;
struct v4l2_mbus_framefmt format;
@@ -460,6 +466,7 @@ static int __devinit s5pcsis_probe(struct platform_device
*pdev)
struct resource *regs_res;
struct csis_state *state;
int ret = -ENOMEM;
+ int i;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
@@ -519,13 +526,14 @@ static int __devinit s5pcsis_probe(struct platform_device
*pdev)
goto e_clkput;
}
+ for (i = 0; i < CSIS_NUM_SUPPLIES; i++)
+ state->supply[i].supply = csis_supply_name[i];
+
if (!pdata->fixed_phy_vdd) {
- state->supply = regulator_get(&pdev->dev, "vdd");
- if (IS_ERR(state->supply)) {
- ret = PTR_ERR(state->supply);
- state->supply = NULL;
+ ret = regulator_bulk_get(&pdev->dev, CSIS_NUM_SUPPLIES,
+state->supply);
+ if (ret)
goto e_clkput;
- }
}
ret = request_irq(state->irq, s5pcsis_irq_handler, 0,
@@ -561,8 +569,7 @@ static int __devinit s5pcsis_probe(struct platform_device
*pdev)
e_irqfree:
free_irq(state->irq, state);
e_regput:
- if (state->supply)
- regulator_put(state->supply);
+ regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supply);
e_clkput:
clk_disable(state->clock[CSIS_CLK_MUX]);
s5pcsis_clk_put(state);
@@ -592,8 +599,9 @@ static int s5pcsis_suspend(struct device *dev)
ret = pdata->phy_enable(state->pdev, false);
if (ret)
goto unlock;
- if (state->supply) {
- ret = regulator_disable(state->supply);
+ if (!pdata->fixed_phy_vdd) {
+ ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
+state->supply);
if (ret)
goto unlock;
}
@@ -622,16 +630,17 @@ static int s5pcsis_resume(struct device *dev)
goto unlock;
if (!(state->flags & ST_POWERED)) {
- if (state->supply)
- ret = regulator_enable(state->supply);
+ if (!pdata->fixed_phy_vdd)
+ ret = regulator_bulk_enable(CSIS_NUM_SUPPLIES,
+ state->supply);
if (ret)
goto unlock;
-
ret = pdata->phy_enable(state->pdev, true);
if (!ret) {
state->flags |= ST_POWERED;
- } else if (state->supply) {
- regulator_disable(state->supply);
+ } else if (!pdata->fixed_phy_vdd) {
+ regulator_bulk_disable(CSIS_NUM_SUPPLIES,
+ state->supply);
goto unlock;
}
clk_enable(state->clock[CSIS_CLK_GATE]);
@@ -679,8 +688,7 @@ static int __devexit s5pcsis_remove(struct platform_device
*pdev)
pm_runtime_set_suspended(&pdev->dev);
s5pcsis_clk_put(state);
- if (state->supply)
-
