On 02/18/2015 04:30 PM, Mauro Carvalho Chehab wrote:
> buf_prepare callback is called for every queued buffer. This is
> an overkill. Call it at buf_setup, as this should be enough.
>
> Signed-off-by: Mauro Carvalho Chehab
>
> diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c
> b/drivers/media/usb/cx231xx/cx231xx-video.c
> index 87c9e27505f4..f9e885fa153f 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-video.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-video.c
> @@ -100,6 +100,75 @@ static struct cx231xx_fmt format[] = {
> };
>
>
> +static int cx231xx_enable_analog_tuner(struct cx231xx *dev)
> +{
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + struct media_device *mdev = dev->media_dev;
> + struct media_entity *entity, *decoder = NULL, *source;
> + struct media_link *link, *found_link = NULL;
> + int i, ret, active_links = 0;
> +
> + if (!mdev)
> + return 0;
> +
> + /*
> + * This will find the tuner that it is connected into the decoder.
s/that it is/that is/
> + * Technically, this is not 100% correct, as the device may be
> + * using an analog input instead of the tuner. However, as we can't
> + * do DVB streaming while the DMA engine is being used for V4L2,
s/streaming while/streaming while/
With those changes:
Acked-by: Hans Verkuil
Regards,
Hans
> + * this should be enough for the actual needs.
> + */
> + media_device_for_each_entity(entity, mdev) {
> + if (entity->type == MEDIA_ENT_T_V4L2_SUBDEV_DECODER) {
> + decoder = entity;
> + break;
> + }
> + }
> + if (!decoder)
> + return 0;
> +
> + for (i = 0; i < decoder->num_links; i++) {
> + link = &decoder->links[i];
> + if (link->sink->entity == decoder) {
> + found_link = link;
> + if (link->flags & MEDIA_LNK_FL_ENABLED)
> + active_links++;
> + break;
> + }
> + }
> +
> + if (active_links == 1 || !found_link)
> + return 0;
> +
> + source = found_link->source->entity;
> + for (i = 0; i < source->num_links; i++) {
> + struct media_entity *sink;
> + int flags = 0;
> +
> + link = &source->links[i];
> + sink = link->sink->entity;
> +
> + if (sink == entity)
> + flags = MEDIA_LNK_FL_ENABLED;
> +
> + ret = media_entity_setup_link(link, flags);
> + if (ret) {
> + dev_err(dev->dev,
> + "Couldn't change link %s->%s to %s. Error %d\n",
> + source->name, sink->name,
> + flags ? "enabled" : "disabled",
> + ret);
> + return ret;
> + } else
> + dev_dbg(dev->dev,
> + "link %s->%s was %s\n",
> + source->name, sink->name,
> + flags ? "ENABLED" : "disabled");
> + }
> +#endif
> + return 0;
> +}
> +
> /* --
> Video buffer and parser functions
> --*/
> @@ -667,6 +736,9 @@ buffer_setup(struct videobuf_queue *vq, unsigned int
> *count, unsigned int *size)
> if (*count < CX231XX_MIN_BUF)
> *count = CX231XX_MIN_BUF;
>
> +
> + cx231xx_enable_analog_tuner(dev);
> +
> return 0;
> }
>
> @@ -703,75 +775,6 @@ static void free_buffer(struct videobuf_queue *vq,
> struct cx231xx_buffer *buf)
> buf->vb.state = VIDEOBUF_NEEDS_INIT;
> }
>
> -static int cx231xx_enable_analog_tuner(struct cx231xx *dev)
> -{
> -#ifdef CONFIG_MEDIA_CONTROLLER
> - struct media_device *mdev = dev->media_dev;
> - struct media_entity *entity, *decoder = NULL, *source;
> - struct media_link *link, *found_link = NULL;
> - int i, ret, active_links = 0;
> -
> - if (!mdev)
> - return 0;
> -
> - /*
> - * This will find the tuner that it is connected into the decoder.
> - * Technically, this is not 100% correct, as the device may be
> - * using an analog input instead of the tuner. However, as we can't
> - * do DVB streaming while the DMA engine is being used for V4L2,
> - * this should be enough for the actual needs.
> - */
> - media_device_for_each_entity(entity, mdev) {
> - if (entity->type == MEDIA_ENT_T_V4L2_SUBDEV_DECODER) {
> - decoder = entity;
> - break;
> - }
> - }
> - if (!decoder)
> - return 0;
> -
> - for (i = 0; i < decoder->num_links; i++) {
> - link = &decoder->links[i];
> - if (link->sink->entity == decoder) {
> - found_link