Re: [PATCH v8 0/5] Synopsys Designware HDMI Video Capture Controller + PHY
Hi Hans, On 27-11-2017 12:05, Hans Verkuil wrote: > Hi Jose, > > Sakari's work was merged. Can you make a v9? Then we can merge this for 4.16. Yeah, I saw that. Unfortunately due to my schedule I don't have the time now to make a v9. I will try to make a new version once possible but I don't know if it will be ready for v4.16 ( and we also need to consider review time ). Best Regards, Jose Miguel Abreu > > Thanks! > > Hans > > On 09/22/2017 02:53 PM, Hans Verkuil wrote: >> Hi Jose, >> >> I'm going to mark this patch series as 'Changes Requested' since it depends >> on >> Sakari's subnotifier work. Once that is accepted I assume you'll make a v9 >> on top >> and then this can hopefully be merged. >> >> Regards, >> >> Hans >> >> On 10/07/17 17:46, Jose Abreu wrote: >>> The Synopsys Designware HDMI RX controller is an HDMI receiver controller >>> that >>> is responsible to process digital data that comes from a phy. The final >>> result >>> is a stream of raw video data that can then be connected to a video DMA, for >>> example, and transfered into RAM so that it can be displayed. >>> >>> The controller + phy available in this series natively support all HDMI 1.4 >>> and >>> HDMI 2.0 modes, including deep color. Although, the driver is quite in its >>> initial stage and unfortunatelly only non deep color modes are supported. >>> Also, >>> audio is not yet supported in the driver (the controller has several audio >>> output interfaces). >>> >>> Version 8 addresses review comments from Rob Herring regarding device tree >>> bindings. >>> >>> I also added one patch for cec.h which is needed to fix build >>> errors/warnings. >>> >>> This series depends on the patch at [1]. >>> >>> This series was tested in a FPGA platform using an embedded platform called >>> ARC AXS101. >>> >>> Jose Abreu (5): >>> [media] cec.h: Add stub function for cec_register_cec_notifier() >>> dt-bindings: media: Document Synopsys Designware HDMI RX >>> MAINTAINERS: Add entry for Synopsys Designware HDMI drivers >>> [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver >>> [media] platform: Add Synopsys Designware HDMI RX Controller Driver >>> >>> Cc: Carlos Palminha >>> Cc: Mauro Carvalho Chehab >>> Cc: Hans Verkuil >>> Cc: Rob Herring >>> Cc: Mark Rutland >>> Cc: Sylwester Nawrocki >>> >>> [1] >>> https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.linuxtv.org_patch_41834_&d=DwIC-g&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=tFDR8q-niqA9NmwOe-TrIsUMRsdlCFuhK9BrjgBnrfE&s=LRBhbdZgYuMYDoE4DDs5uwO3BHci_7E4vp77UYn8Duo&e= >>> >>> .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 + >>> MAINTAINERS|7 + >>> drivers/media/platform/Kconfig |2 + >>> drivers/media/platform/Makefile|2 + >>> drivers/media/platform/dwc/Kconfig | 23 + >>> drivers/media/platform/dwc/Makefile|2 + >>> drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 + >>> drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 + >>> drivers/media/platform/dwc/dw-hdmi-rx.c| 1823 >>> >>> drivers/media/platform/dwc/dw-hdmi-rx.h| 441 + >>> include/media/cec.h|8 + >>> include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++ >>> include/media/dwc/dw-hdmi-rx-pdata.h | 70 + >>> 13 files changed, 3471 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt >>> create mode 100644 drivers/media/platform/dwc/Kconfig >>> create mode 100644 drivers/media/platform/dwc/Makefile >>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c >>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h >>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c >>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h >>> create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h >>> create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h >>>
Re: [PATCH v8 0/5] Synopsys Designware HDMI Video Capture Controller + PHY
Hi Jose, Sakari's work was merged. Can you make a v9? Then we can merge this for 4.16. Thanks! Hans On 09/22/2017 02:53 PM, Hans Verkuil wrote: > Hi Jose, > > I'm going to mark this patch series as 'Changes Requested' since it depends on > Sakari's subnotifier work. Once that is accepted I assume you'll make a v9 on > top > and then this can hopefully be merged. > > Regards, > > Hans > > On 10/07/17 17:46, Jose Abreu wrote: >> The Synopsys Designware HDMI RX controller is an HDMI receiver controller >> that >> is responsible to process digital data that comes from a phy. The final >> result >> is a stream of raw video data that can then be connected to a video DMA, for >> example, and transfered into RAM so that it can be displayed. >> >> The controller + phy available in this series natively support all HDMI 1.4 >> and >> HDMI 2.0 modes, including deep color. Although, the driver is quite in its >> initial stage and unfortunatelly only non deep color modes are supported. >> Also, >> audio is not yet supported in the driver (the controller has several audio >> output interfaces). >> >> Version 8 addresses review comments from Rob Herring regarding device tree >> bindings. >> >> I also added one patch for cec.h which is needed to fix build >> errors/warnings. >> >> This series depends on the patch at [1]. >> >> This series was tested in a FPGA platform using an embedded platform called >> ARC AXS101. >> >> Jose Abreu (5): >> [media] cec.h: Add stub function for cec_register_cec_notifier() >> dt-bindings: media: Document Synopsys Designware HDMI RX >> MAINTAINERS: Add entry for Synopsys Designware HDMI drivers >> [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver >> [media] platform: Add Synopsys Designware HDMI RX Controller Driver >> >> Cc: Carlos Palminha >> Cc: Mauro Carvalho Chehab >> Cc: Hans Verkuil >> Cc: Rob Herring >> Cc: Mark Rutland >> Cc: Sylwester Nawrocki >> >> [1] https://patchwork.linuxtv.org/patch/41834/ >> >> .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 + >> MAINTAINERS|7 + >> drivers/media/platform/Kconfig |2 + >> drivers/media/platform/Makefile|2 + >> drivers/media/platform/dwc/Kconfig | 23 + >> drivers/media/platform/dwc/Makefile|2 + >> drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 + >> drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 + >> drivers/media/platform/dwc/dw-hdmi-rx.c| 1823 >> >> drivers/media/platform/dwc/dw-hdmi-rx.h| 441 + >> include/media/cec.h|8 + >> include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++ >> include/media/dwc/dw-hdmi-rx-pdata.h | 70 + >> 13 files changed, 3471 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt >> create mode 100644 drivers/media/platform/dwc/Kconfig >> create mode 100644 drivers/media/platform/dwc/Makefile >> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c >> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h >> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c >> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h >> create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h >> create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h >> >
Re: [PATCH v8 0/5] Synopsys Designware HDMI Video Capture Controller + PHY
Hi Jose, I'm going to mark this patch series as 'Changes Requested' since it depends on Sakari's subnotifier work. Once that is accepted I assume you'll make a v9 on top and then this can hopefully be merged. Regards, Hans On 10/07/17 17:46, Jose Abreu wrote: > The Synopsys Designware HDMI RX controller is an HDMI receiver controller that > is responsible to process digital data that comes from a phy. The final result > is a stream of raw video data that can then be connected to a video DMA, for > example, and transfered into RAM so that it can be displayed. > > The controller + phy available in this series natively support all HDMI 1.4 > and > HDMI 2.0 modes, including deep color. Although, the driver is quite in its > initial stage and unfortunatelly only non deep color modes are supported. > Also, > audio is not yet supported in the driver (the controller has several audio > output interfaces). > > Version 8 addresses review comments from Rob Herring regarding device tree > bindings. > > I also added one patch for cec.h which is needed to fix build errors/warnings. > > This series depends on the patch at [1]. > > This series was tested in a FPGA platform using an embedded platform called > ARC AXS101. > > Jose Abreu (5): > [media] cec.h: Add stub function for cec_register_cec_notifier() > dt-bindings: media: Document Synopsys Designware HDMI RX > MAINTAINERS: Add entry for Synopsys Designware HDMI drivers > [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver > [media] platform: Add Synopsys Designware HDMI RX Controller Driver > > Cc: Carlos Palminha > Cc: Mauro Carvalho Chehab > Cc: Hans Verkuil > Cc: Rob Herring > Cc: Mark Rutland > Cc: Sylwester Nawrocki > > [1] https://patchwork.linuxtv.org/patch/41834/ > > .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 + > MAINTAINERS|7 + > drivers/media/platform/Kconfig |2 + > drivers/media/platform/Makefile|2 + > drivers/media/platform/dwc/Kconfig | 23 + > drivers/media/platform/dwc/Makefile|2 + > drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 + > drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 + > drivers/media/platform/dwc/dw-hdmi-rx.c| 1823 > > drivers/media/platform/dwc/dw-hdmi-rx.h| 441 + > include/media/cec.h|8 + > include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++ > include/media/dwc/dw-hdmi-rx-pdata.h | 70 + > 13 files changed, 3471 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt > create mode 100644 drivers/media/platform/dwc/Kconfig > create mode 100644 drivers/media/platform/dwc/Makefile > create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c > create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h > create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c > create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h > create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h > create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h >
[PATCH v8 0/5] Synopsys Designware HDMI Video Capture Controller + PHY
The Synopsys Designware HDMI RX controller is an HDMI receiver controller that is responsible to process digital data that comes from a phy. The final result is a stream of raw video data that can then be connected to a video DMA, for example, and transfered into RAM so that it can be displayed. The controller + phy available in this series natively support all HDMI 1.4 and HDMI 2.0 modes, including deep color. Although, the driver is quite in its initial stage and unfortunatelly only non deep color modes are supported. Also, audio is not yet supported in the driver (the controller has several audio output interfaces). Version 8 addresses review comments from Rob Herring regarding device tree bindings. I also added one patch for cec.h which is needed to fix build errors/warnings. This series depends on the patch at [1]. This series was tested in a FPGA platform using an embedded platform called ARC AXS101. Jose Abreu (5): [media] cec.h: Add stub function for cec_register_cec_notifier() dt-bindings: media: Document Synopsys Designware HDMI RX MAINTAINERS: Add entry for Synopsys Designware HDMI drivers [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver [media] platform: Add Synopsys Designware HDMI RX Controller Driver Cc: Carlos Palminha Cc: Mauro Carvalho Chehab Cc: Hans Verkuil Cc: Rob Herring Cc: Mark Rutland Cc: Sylwester Nawrocki [1] https://patchwork.linuxtv.org/patch/41834/ .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 + MAINTAINERS|7 + drivers/media/platform/Kconfig |2 + drivers/media/platform/Makefile|2 + drivers/media/platform/dwc/Kconfig | 23 + drivers/media/platform/dwc/Makefile|2 + drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 + drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 + drivers/media/platform/dwc/dw-hdmi-rx.c| 1823 drivers/media/platform/dwc/dw-hdmi-rx.h| 441 + include/media/cec.h|8 + include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++ include/media/dwc/dw-hdmi-rx-pdata.h | 70 + 13 files changed, 3471 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt create mode 100644 drivers/media/platform/dwc/Kconfig create mode 100644 drivers/media/platform/dwc/Makefile create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h -- 1.9.1