Re: [linux-dvb] Hauppauge WinTV-CI
BRUNETON Béranger wrote: I have been struggling for ages with this device, trying get the firmware to load. The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb I could use some help, like : traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ... Do you know why it doesn't support S2 channels ? Hardware or software limitation ? Regards I don't have much in the way of DVB-expertise, but here goes : 1) WinTV-CI doesn't participate in getting the signal, so changes in tuners/modulation standards/... etc shouldn't bother it 2) It is a USB2-device so should have the raw bandwidth to handle a HDTV stream 3) It uses the smartcard you'd use normally, so the actual decryption is done with the same hardware so I'd venture it's a software limitation. Luc -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Hauppauge WinTV-CI
Goga777 wrote: Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ? not Goga ___ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-...@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb I have been struggling for ages with this device, trying get the firmware to load. The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb I could use some help, like : = traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser = recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) = suggestions on how to proceed ... Luc -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Hauppauge WinTV-CI
Goga777 wrote: Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ? not Goga ___ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-...@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb I have been struggling for ages with this device, trying get the firmware to load. The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb I could use some help, like : traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ... Luc -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Hauppauge WinTV-CI
I have been struggling for ages with this device, trying get the firmware to load. The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. No luck : the A3 part does not get loaded, not even using fxloads' A3-loader Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb I could use some help, like : traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) suggestions on how to proceed ... Do you know why it doesn't support S2 channels ? Hardware or software limitation ? Regards -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Hauppauge WinTV-CI
Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ? not Goga -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
