Re: Haupp. HVR-1100 problem and DVB-T card
Hi Fabio, Am Mittwoch, den 14.10.2009, 13:54 + schrieb fabio tirapelle: > - Messaggio originale - > > Da: hermann pitton > > A: fabio tirapelle > > > > > > I have installed mythtv on this configuration: > > > > > Asus M3N78-VM GF8200 RGVSM > > > > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > > > > Haupp. WinTV HVR-1100 -t/a PCI > > > > > TechniSat SkyStar 2 DVB-S PCI > > > > > nVidia GeForce 8200 > > > > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > > I would try to test the HVR1110 next on another PC with known working > > PCI hardware, also above different operating systems if possible. > > Hi Hermann! Thank you for your quick response. I tested the card on a M2N-VM > DH and it works. So my best guess is that the card does not work on my actual > motherboard. > > > We know that the HVR1110s are properly detected on almost all hardware. > > Before thinking about replacing mobo/PSU, make sure the card is OK. > > Do you have a suggestion for a new mobo that you know is working (if I can > keep my other hardware that would be great)? > the mobo might need some quirk i'm not aware off. Since we do not have any other such report yet, knock on wood, I would expect all other hardware is still fine. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
- Messaggio originale - > Da: hermann pitton > A: fabio tirapelle > > > > I have installed mythtv on this configuration: > > > > Asus M3N78-VM GF8200 RGVSM > > > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > > > Haupp. WinTV HVR-1100 -t/a PCI > > > > TechniSat SkyStar 2 DVB-S PCI > > > > nVidia GeForce 8200 > > > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > I would try to test the HVR1110 next on another PC with known working > PCI hardware, also above different operating systems if possible. Hi Hermann! Thank you for your quick response. I tested the card on a M2N-VM DH and it works. So my best guess is that the card does not work on my actual motherboard. > We know that the HVR1110s are properly detected on almost all hardware. > Before thinking about replacing mobo/PSU, make sure the card is OK. Do you have a suggestion for a new mobo that you know is working (if I can keep my other hardware that would be great)? Thank you very mutch for your time, Fabio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Am Sonntag, den 11.10.2009, 19:29 + schrieb fabio tirapelle: > Hi Hermann > > > Hi Fabio, > > > > > Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: > > > Hi > > > > > > I have installed mythtv on this configuration: > > > Asus M3N78-VM GF8200 RGVSM > > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > > Haupp. WinTV HVR-1100 -t/a PCI > > > TechniSat SkyStar 2 DVB-S PCI > > > nVidia GeForce 8200 > > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > > > did send to those likely interested too and might be able to give better > > advice. > > > > > Two questions > > > > > > 1) But the Haupp. WinTV will not be found even if I have followed > > > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 > > > http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) > > > > > > Output of dmesg > > > > > > [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 > > > [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> > > > GSI > > 17 (level, low) -> IRQ 17 > > > [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) > > > [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 > > > [ 13.078664] b2c2-flexcop: i2c master_xfer failed > > > [ 13.078893] b2c2-flexcop: i2c master_xfer failed > > > [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > > > [ 13.078897] CX24123: wrong demod revision: 87 > > > [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded > > > [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . > > > [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... > > > [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' > > > at the > > 'PCI' bus controlled by a 'FlexCopIIb' complete > > > [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 > > > [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 > > > (level, > > low) -> IRQ 16 > > > [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, > > > latency: > > 255, mmio: 0x0 > > > > Memory allocation at the PCI bus fails and PCI latency is very high for > > nothing in the end. > > > > > [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC > > [card=0,autodetected] > > > > Either the eeprom is corrupted, or more likely, this fails because of > > the previous failing. > > > > > [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 > > > [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 > > > [ 13.393682] saa7134 ALSA driver for DMA sound loaded > > > [ 13.393685] saa7134 ALSA: no saa7134 cards found > > > > > > ouput lspci > > > 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB > > > chip > > / Technisat SkyStar2 DVB card (rev 02) > > > 01:07.0 Multimedia controller: Philips Semiconductors > > > SAA7131/SAA7133/SAA7135 > > Video Broadcast Decoder (rev d1) > > > > > > 2) What kind of DVB-T card will you suggest for my configuration instead > > > of > > "Hauppage WinTv"? > > > > > > > We have some unknowns on the various Hauppauge 1110s, but in general > > they are assumed to be well supported. > > > > They are all auto eeprom detectable and only for latest revisions you > > need some latest mercurial v4l-dvb. These look good now too. > > > > Could you try again with the HVR1110 as the only PCI card? > > I have tried without success > > > > > If this still fails, the mobo seems not to be best treated anyway too, I > > would guess the card is broken. > > What kind of mobo do you suggest? If necessary I can buy a new mobo > > > > > Cheers, > > Hermann > > Thanks Fabio > Hi Fabio, I would try to test the HVR1110 next on another PC with known working PCI hardware, also above different operating systems if possible. We know that the HVR1110s are properly detected on almost all hardware. Before thinking about replacing mobo/PSU, make sure the card is OK. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Hi Hermann > Hi Fabio, > > Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: > > Hi > > > > I have installed mythtv on this configuration: > > Asus M3N78-VM GF8200 RGVSM > > AMD Ath64 X2LV 3100BOX6000+ 1MB > > Haupp. WinTV HVR-1100 -t/a PCI > > TechniSat SkyStar 2 DVB-S PCI > > nVidia GeForce 8200 > > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > did send to those likely interested too and might be able to give better > advice. > > > Two questions > > > > 1) But the Haupp. WinTV will not be found even if I have followed > > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 > > http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) > > > > Output of dmesg > > > > [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 > > [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> > > GSI > 17 (level, low) -> IRQ 17 > > [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) > > [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 > > [ 13.078664] b2c2-flexcop: i2c master_xfer failed > > [ 13.078893] b2c2-flexcop: i2c master_xfer failed > > [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > > [ 13.078897] CX24123: wrong demod revision: 87 > > [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded > > [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . > > [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... > > [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at > > the > 'PCI' bus controlled by a 'FlexCopIIb' complete > > [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 > > [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 > > (level, > low) -> IRQ 16 > > [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, > > latency: > 255, mmio: 0x0 > > Memory allocation at the PCI bus fails and PCI latency is very high for > nothing in the end. > > > [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC > [card=0,autodetected] > > Either the eeprom is corrupted, or more likely, this fails because of > the previous failing. > > > [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 > > [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 > > [ 13.393682] saa7134 ALSA driver for DMA sound loaded > > [ 13.393685] saa7134 ALSA: no saa7134 cards found > > > > ouput lspci > > 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB > > chip > / Technisat SkyStar2 DVB card (rev 02) > > 01:07.0 Multimedia controller: Philips Semiconductors > > SAA7131/SAA7133/SAA7135 > Video Broadcast Decoder (rev d1) > > > > 2) What kind of DVB-T card will you suggest for my configuration instead of > "Hauppage WinTv"? > > > > We have some unknowns on the various Hauppauge 1110s, but in general > they are assumed to be well supported. > > They are all auto eeprom detectable and only for latest revisions you > need some latest mercurial v4l-dvb. These look good now too. > > Could you try again with the HVR1110 as the only PCI card? I have tried without success > > If this still fails, the mobo seems not to be best treated anyway too, I > would guess the card is broken. What kind of mobo do you suggest? If necessary I can buy a new mobo > > Cheers, > Hermann Thanks Fabio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
On Thu, Oct 8, 2009 at 9:01 PM, hermann pitton wrote: > Hi Fabio, > > Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: >> Hi >> >> I have installed mythtv on this configuration: >> Asus M3N78-VM GF8200 RGVSM >> AMD Ath64 X2LV 3100BOX6000+ 1MB >> Haupp. WinTV HVR-1100 -t/a PCI >> TechniSat SkyStar 2 DVB-S PCI >> nVidia GeForce 8200 >> Ubuntu 8.10 - Linux htpc 2.6.27-11-generic > > did send to those likely interested too and might be able to give better > advice. > >> Two questions >> >> 1) But the Haupp. WinTV will not be found even if I have followed >> http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 >> http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) >> >> Output of dmesg >> >> [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 >> [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> GSI >> 17 (level, low) -> IRQ 17 >> [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) >> [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 >> [ 13.078664] b2c2-flexcop: i2c master_xfer failed >> [ 13.078893] b2c2-flexcop: i2c master_xfer failed >> [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) >> [ 13.078897] CX24123: wrong demod revision: 87 >> [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded >> [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . >> [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... >> [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at >> the 'PCI' bus controlled by a 'FlexCopIIb' complete >> [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 >> [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 >> (level, low) -> IRQ 16 >> [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, >> latency: 255, mmio: 0x0 > > Memory allocation at the PCI bus fails and PCI latency is very high for > nothing in the end. > >> [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC >> [card=0,autodetected] > > Either the eeprom is corrupted, or more likely, this fails because of > the previous failing. > >> [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 >> [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 >> [ 13.393682] saa7134 ALSA driver for DMA sound loaded >> [ 13.393685] saa7134 ALSA: no saa7134 cards found >> >> ouput lspci >> 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB >> chip / Technisat SkyStar2 DVB card (rev 02) >> 01:07.0 Multimedia controller: Philips Semiconductors >> SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) >> >> 2) What kind of DVB-T card will you suggest for my configuration instead of >> "Hauppage WinTv"? >> > > We have some unknowns on the various Hauppauge 1110s, but in general > they are assumed to be well supported. > > They are all auto eeprom detectable and only for latest revisions you > need some latest mercurial v4l-dvb. These look good now too. > > Could you try again with the HVR1110 as the only PCI card? > > If this still fails, the mobo seems not to be best treated anyway too, I > would guess the card is broken. > > Cheers, > Hermann ...just to add to Hermann's advice: There are two possible cards that could be found in the HVR1110 retail box. 1) the actual HVR1110 2) the newer HVR1120 They are basically the same in functionality. The HVR1110 uses a TDA8275a+TDA10046, where the HVR1120 uses a TDA18271+TDA10048 So, if the HVR1110 configuration doesn't work for you, try the HVR1120 As Hermann mentioned, you will need the latest v4l-dvb from mercurial in order to support it, if you actually have the newer card. Also, for reference, the HVR1120 *used to* be called HVR1110r3 - I changed its name in the Linux driver once the product was officially released. I hope this helps. Regards, Mike -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Hi Fabio, Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: > Hi > > I have installed mythtv on this configuration: > Asus M3N78-VM GF8200 RGVSM > AMD Ath64 X2LV 3100BOX6000+ 1MB > Haupp. WinTV HVR-1100 -t/a PCI > TechniSat SkyStar 2 DVB-S PCI > nVidia GeForce 8200 > Ubuntu 8.10 - Linux htpc 2.6.27-11-generic did send to those likely interested too and might be able to give better advice. > Two questions > > 1) But the Haupp. WinTV will not be found even if I have followed > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 > http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) > > Output of dmesg > > [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 > [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> GSI > 17 (level, low) -> IRQ 17 > [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) > [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 > [ 13.078664] b2c2-flexcop: i2c master_xfer failed > [ 13.078893] b2c2-flexcop: i2c master_xfer failed > [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > [ 13.078897] CX24123: wrong demod revision: 87 > [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded > [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . > [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... > [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at > the 'PCI' bus controlled by a 'FlexCopIIb' complete > [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 > [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 > (level, low) -> IRQ 16 > [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, latency: > 255, mmio: 0x0 Memory allocation at the PCI bus fails and PCI latency is very high for nothing in the end. > [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC > [card=0,autodetected] Either the eeprom is corrupted, or more likely, this fails because of the previous failing. > [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 > [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 > [ 13.393682] saa7134 ALSA driver for DMA sound loaded > [ 13.393685] saa7134 ALSA: no saa7134 cards found > > ouput lspci > 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB > chip / Technisat SkyStar2 DVB card (rev 02) > 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 > Video Broadcast Decoder (rev d1) > > 2) What kind of DVB-T card will you suggest for my configuration instead of > "Hauppage WinTv"? > We have some unknowns on the various Hauppauge 1110s, but in general they are assumed to be well supported. They are all auto eeprom detectable and only for latest revisions you need some latest mercurial v4l-dvb. These look good now too. Could you try again with the HVR1110 as the only PCI card? If this still fails, the mobo seems not to be best treated anyway too, I would guess the card is broken. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Haupp. HVR-1100 problem and DVB-T card
Hi I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic Two questions 1) But the Haupp. WinTV will not be found even if I have followed http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 http://ubuntuforums.org/showthread.php?t=623126&page=2 (#12) Output of dmesg [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 [ 13.078664] b2c2-flexcop: i2c master_xfer failed [ 13.078893] b2c2-flexcop: i2c master_xfer failed [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 13.078897] CX24123: wrong demod revision: 87 [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 13.363517] saa7134 :01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16 [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, latency: 255, mmio: 0x0 [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC [card=0,autodetected] [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 [ 13.393682] saa7134 ALSA driver for DMA sound loaded [ 13.393685] saa7134 ALSA: no saa7134 cards found ouput lspci 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 2) What kind of DVB-T card will you suggest for my configuration instead of "Hauppage WinTv"? Thanks for help -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html