Re: Help needed: Anysee E30C Plus (DVB-C Tuner)
Thanks for the report. I have now following matrix: not working: OpenSuSE 11.4 Kernel 2.6.37 Ubuntu 11.4 Kernel 2.6.38 working: Fedora 14 Kernel 2.6.35 regards Antti On 05/12/2011 05:35 PM, Per Kofod wrote: Thanks, that worked. Actually I am not running ubuntu on this PC; but OpenSuSE 11.4; but I was planninh using Mythbuntu far my media center. Thanks a lot. Cheers Per On 05/12/2011 04:08 PM, Antti Palosaari wrote: On 05/12/2011 04:27 PM, Per Kofod wrote: Hi I am new to this mailing list, so bare with me if this have been asked before. I have just bought an Anysee E30C Plus, as I had read, that this device is supported in Linux, my plan is building a Mythtv media center, to replace my old harddisk recorder. However I cannot get it to work, and then I read thatt the newest version might not work, and that I should join this list. I have tried to compile a new kernel with the newest dvb stuff from the git repository, just to make sure, that I have the newest drivers. I have alsio blacklistet the zl10353 module to avoid the device being loaded as an DVB-T device (which it is not, it is a cable only version). What information do you need me to obtain, or do you have a hint to how I might get this working? The device is reconnized OK as seen here from dmesg: [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 For the some reason hardware ID 15 does not work on latest Ubuntu 11.04. That is basically E30 Combo Plus and newer E30 C Plus, which is same device as E30 Combo Plus but without DVB-T demod. Install latest drivers and it will work. And I hope someone have time to examine why it does not work anymore out-of-the-box in Ubuntu 11.04. http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Help needed: Anysee E30C Plus (DVB-C Tuner)
Thanks, that worked. Actually I am not running ubuntu on this PC; but OpenSuSE 11.4; but I was planninh using Mythbuntu far my media center. Thanks a lot. Cheers Per On 05/12/2011 04:08 PM, Antti Palosaari wrote: On 05/12/2011 04:27 PM, Per Kofod wrote: Hi I am new to this mailing list, so bare with me if this have been asked before. I have just bought an Anysee E30C Plus, as I had read, that this device is supported in Linux, my plan is building a Mythtv media center, to replace my old harddisk recorder. However I cannot get it to work, and then I read thatt the newest version might not work, and that I should join this list. I have tried to compile a new kernel with the newest dvb stuff from the git repository, just to make sure, that I have the newest drivers. I have alsio blacklistet the zl10353 module to avoid the device being loaded as an DVB-T device (which it is not, it is a cable only version). What information do you need me to obtain, or do you have a hint to how I might get this working? The device is reconnized OK as seen here from dmesg: [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 For the some reason hardware ID 15 does not work on latest Ubuntu 11.04. That is basically E30 Combo Plus and newer E30 C Plus, which is same device as E30 Combo Plus but without DVB-T demod. Install latest drivers and it will work. And I hope someone have time to examine why it does not work anymore out-of-the-box in Ubuntu 11.04. http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers Antti -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Help needed: Anysee E30C Plus (DVB-C Tuner)
On 05/12/2011 04:27 PM, Per Kofod wrote: Hi I am new to this mailing list, so bare with me if this have been asked before. I have just bought an Anysee E30C Plus, as I had read, that this device is supported in Linux, my plan is building a Mythtv media center, to replace my old harddisk recorder. However I cannot get it to work, and then I read thatt the newest version might not work, and that I should join this list. I have tried to compile a new kernel with the newest dvb stuff from the git repository, just to make sure, that I have the newest drivers. I have alsio blacklistet the zl10353 module to avoid the device being loaded as an DVB-T device (which it is not, it is a cable only version). What information do you need me to obtain, or do you have a hint to how I might get this working? The device is reconnized OK as seen here from dmesg: [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 For the some reason hardware ID 15 does not work on latest Ubuntu 11.04. That is basically E30 Combo Plus and newer E30 C Plus, which is same device as E30 Combo Plus but without DVB-T demod. Install latest drivers and it will work. And I hope someone have time to examine why it does not work anymore out-of-the-box in Ubuntu 11.04. http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Help needed: Anysee E30C Plus (DVB-C Tuner)
Hi I am new to this mailing list, so bare with me if this have been asked before. I have just bought an Anysee E30C Plus, as I had read, that this device is supported in Linux, my plan is building a Mythtv media center, to replace my old harddisk recorder. However I cannot get it to work, and then I read thatt the newest version might not work, and that I should join this list. I have tried to compile a new kernel with the newest dvb stuff from the git repository, just to make sure, that I have the newest drivers. I have alsio blacklistet the zl10353 module to avoid the device being loaded as an DVB-T device (which it is not, it is a cable only version). What information do you need me to obtain, or do you have a hint to how I might get this working? The device is reconnized OK as seen here from dmesg: [ 11.354973] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 11.355004] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 11.355239] DVB: registering new adapter (Anysee DVB USB2.0) [ 11.356661] anysee: firmware version:0.1.2 hardware id:15 [ 11.391192] IR NEC protocol handler initialized [ 11.412221] IR RC5(x) protocol handler initialized [ 11.412611] DVB: Unable to find symbol zl10353_attach() [ 11.414527] DVB: Unable to find symbol zl10353_attach() [ 11.417536] DVB: registering adapter 1 frontend 0 (Philips TDA10023 DVB-C)... [ 11.430950] IR RC6 protocol handler initialized [ 11.553821] IR JVC protocol handler initialized [ 11.555642] input: IR-receiver inside an USB DVB receiver as /devices/pci:00/:00:1d.7/usb2/2-5/input/input6 [ 11.555682] dvb-usb: schedule remote query interval to 200 msecs. [ 11.555689] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected. [ 11.557207] usbcore: registered new interface driver dvb_usb_anysee [ 11.569445] IR Sony protocol handler initialized [ 11.584259] lirc_dev: IR Remote Control driver registered, major 251 [ 11.586747] IR LIRC bridge handler initialized but lsusb reports this as an DVB-T Device: tux3:~ # lsusb -s 002:002 -v Bus 002 Device 002: ID 1c73:861f AMT Anysee E30 USB 2.0 DVB-T Receiver Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x1c73 AMT idProduct 0x861f Anysee E30 USB 2.0 DVB-T Receiver bcdDevice1.00 iManufacturer 1 AMT.CO.KR iProduct2 anysee-FA(LP) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 83 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 1 bNumEndpoints
