Help wanted on removing dibusb_rc_keys from dvb_usb_rtl2831u module
This is probably caused by the current dvb_usb_rtl2831u module using dibusb_rc_keys, which disapperead due to IR changes. Syncing the rtl2831-r2/ tree with the main archive cause compilation problems in v4l/dibusb-mc.c and I suppose rtd2830u.c will not compile anymore either. Can somebody with knowledge on IR help me with updating the code ? $ grep dibusb_rc_keys */*.[ch] v4l/dibusb-mc.c:.rc_key_map = dibusb_rc_keys, v4l/rtd2830u.c: d->props.rc_key_map = dibusb_rc_keys; v4l/rtd2830u.c: .rc_key_map = dibusb_rc_keys, v4l/rtd2830u.c: .rc_key_map = dibusb_rc_keys, I addition, I'd like to get help on how to move the IR code into http://linuxtv.org/hg/~anttip/rtl2831u That (in all other respects much better) version has NO IR support at all at. Adding IR to that driver, and getting it into the kernel would solve all problems. Thomas Holzeisen wrote: Hi, i am using a DVB-T USB-Stick with Realtek RTL2831 chip (14aa:0160) on Debian Lenny having the lastest Backport kernel 2.6.32. $ uname -a Linux xbmc 2.6.32-bpo.5-686 #1 SMP Fri Jun 11 22:20:29 UTC 2010 i686 GNU/Linux For v4l I took the drivers from here: http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2/ The checked out source compile and installs fine. I compiled them starting with "make distclean". But when plugging the DVB-Stick this happens: [ 229.524028] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 229.658591] usb 4-2: New USB device found, idVendor=14aa, idProduct=0160 [ 229.661204] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 229.663841] usb 4-2: Product: DTV Receiver [ 229.666308] usb 4-2: Manufacturer: DTV Receiver [ 229.668826] usb 4-2: SerialNumber: 00067936 [ 229.671609] usb 4-2: configuration #1 chosen from 1 choice [ 230.266960] dvb-usb: found a 'Freecom USB 2.0 DVB-T Device' in warm state. [ 230.270314] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 230.273641] DVB: registering new adapter (Freecom USB 2.0 DVB-T Device) [ 230.277461] DVB: registering adapter 0 frontend 0 (Realtek RTL2831 DVB-T)... [ 230.282081] BUG: unable to handle kernel paging request at 02b65c40 [ 230.285794] IP: [] dvb_usb_remote_init+0x12e/0x209 [dvb_usb] [ 230.291463] *pde = [ 230.293969] Oops: 0002 [#1] SMP [ 230.293969] last sysfs file: /sys/devices/pci:00/:00:06.1/usb4/4-2/bmAttributes [ 230.293969] Modules linked in: dvb_usb_rtl2831u(+) dvb_usb_dibusb_common dvb_usb dib3000mc dibx000_common dvb_ttpci dvb_core saa7146_vv videodev v4l1_compat saa7146 videobuf_dma_sg videobuf_core ttpci_eeprom iscsi_trgt crc32c loop snd_hda_codec_nvhdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device snd tpm_tis soundcore tpm shpchp psmouse wmi serio_raw tpm_bios snd_page_alloc pcspkr pci_hotplug processor evdev button ir_core nvidia(P) lirc_imon i2c_nforce2 i2c_core lirc_dev ext3 jbd mbcache raid1 md_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif usb_storage ahci ata_generic libata ehci_hcd ohci_hcd scsi_mod usbcore nls_base forcedeth thermal fan thermal_sys [last unloaded: scsi_wait_scan] [ 230.293969] [ 230.293969] Pid: 3279, comm: modprobe Tainted: P (2.6.32-bpo.5-686 #1) Point of View [ 230.293969] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 230.293969] EIP is at dvb_usb_remote_init+0x12e/0x209 [dvb_usb] [ 230.293969] EAX: 69656148 EBX: f589b000 ECX: c14c18e4 EDX: f589b018 [ 230.293969] ESI: f5904000 EDI: 03b8 EBP: 0077 ESP: f5851e88 [ 230.293969] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 230.293969] Process modprobe (pid: 3279, ti=f585 task=f5cd4400 task.ti=f585) [ 230.293969] Stack: [ 230.293969] f589b018 f5904000 f5904000 f5904864 0001 f7c61945 f5904418 f80bb8d0 [ 230.293969] <0> f5912000 f5b8f800 f80bad88 f80bad88 f5912000 [ 230.293969] <0> f80bb894 f80ba970 f80b886d f80ba960 f5912000 f80c8c98 f591201c [ 230.293969] Call Trace: [ 230.293969] [] ? dvb_usb_device_init+0x515/0x51c [dvb_usb] [ 230.293969] [] ? rtd2831u_usb_probe+0x19/0x48 [dvb_usb_rtl2831u] [ 230.293969] [] ? usb_probe_interface+0xe7/0x130 [usbcore] [ 230.293969] [] ? driver_probe_device+0x8a/0x11e [ 230.293969] [] ? __driver_attach+0x40/0x5b [ 230.293969] [] ? bus_for_each_dev+0x37/0x5f [ 230.293969] [] ? driver_attach+0x11/0x13 [ 230.293969] [] ? __driver_attach+0x0/0x5b [ 230.293969] [] ? bus_add_driver+0x99/0x1c2 [ 230.293969] [] ? driver_register+0x87/0xe0 [ 230.293969] [] ? usb_register_driver+0x5d/0xb4 [usbcore] [ 230.293969] [] ? rtd2831u_usb_module_init+0x0/0x2c [dvb_usb_rtl2831u] [ 230.293969] [] ? rtd2831u_usb_module_init+0x15/0x2c [dvb_usb_rtl2831u] [ 230.293969] [] ? do_one_initcall+0x55/0x155 [ 230.293969] [] ? sys_init_module+0xa7/0x1d7 [ 230.293969] [] ? sysenter_do_call+0x12/0x28 [ 230.293969] Code: 3e c6 f7 20 74 18 8b 86 a0 00 00 00 5
Re: Help wanted on removing dibusb_rc_keys from dvb_usb_rtl2831u module
OK. I found the solution by looking at the sources at: http://lxr.free-electrons.com/source/drivers/media/dvb/dvb-usb/dibusb-common.c What needed was a rename over all sources affected: struct dvb_usb_rc_key dibusb_rc_keys[] => struct dvb_usb_rc_key ir_codes_dibusb_table[] I also fixed missing renaming in dib_usb driver. I have updated http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2/ Jan Hoogenraad wrote: This is probably caused by the current dvb_usb_rtl2831u module using dibusb_rc_keys, which disapperead due to IR changes. Syncing the rtl2831-r2/ tree with the main archive cause compilation problems in v4l/dibusb-mc.c and I suppose rtd2830u.c will not compile anymore either. Can somebody with knowledge on IR help me with updating the code ? $ grep dibusb_rc_keys */*.[ch] v4l/dibusb-mc.c:.rc_key_map = dibusb_rc_keys, v4l/rtd2830u.c:d->props.rc_key_map = dibusb_rc_keys; v4l/rtd2830u.c:.rc_key_map = dibusb_rc_keys, v4l/rtd2830u.c:.rc_key_map = dibusb_rc_keys, I addition, I'd like to get help on how to move the IR code into http://linuxtv.org/hg/~anttip/rtl2831u That (in all other respects much better) version has NO IR support at all at. Adding IR to that driver, and getting it into the kernel would solve all problems. Thomas Holzeisen wrote: Hi, i am using a DVB-T USB-Stick with Realtek RTL2831 chip (14aa:0160) on Debian Lenny having the lastest Backport kernel 2.6.32. $ uname -a Linux xbmc 2.6.32-bpo.5-686 #1 SMP Fri Jun 11 22:20:29 UTC 2010 i686 GNU/Linux For v4l I took the drivers from here: http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2/ The checked out source compile and installs fine. I compiled them starting with "make distclean". But when plugging the DVB-Stick this happens: [ 229.524028] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 229.658591] usb 4-2: New USB device found, idVendor=14aa, idProduct=0160 [ 229.661204] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 229.663841] usb 4-2: Product: DTV Receiver [ 229.666308] usb 4-2: Manufacturer: DTV Receiver [ 229.668826] usb 4-2: SerialNumber: 00067936 [ 229.671609] usb 4-2: configuration #1 chosen from 1 choice [ 230.266960] dvb-usb: found a 'Freecom USB 2.0 DVB-T Device' in warm state. [ 230.270314] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 230.273641] DVB: registering new adapter (Freecom USB 2.0 DVB-T Device) [ 230.277461] DVB: registering adapter 0 frontend 0 (Realtek RTL2831 DVB-T)... [ 230.282081] BUG: unable to handle kernel paging request at 02b65c40 [ 230.285794] IP: [] dvb_usb_remote_init+0x12e/0x209 [dvb_usb] [ 230.291463] *pde = [ 230.293969] Oops: 0002 [#1] SMP [ 230.293969] last sysfs file: /sys/devices/pci:00/:00:06.1/usb4/4-2/bmAttributes [ 230.293969] Modules linked in: dvb_usb_rtl2831u(+) dvb_usb_dibusb_common dvb_usb dib3000mc dibx000_common dvb_ttpci dvb_core saa7146_vv videodev v4l1_compat saa7146 videobuf_dma_sg videobuf_core ttpci_eeprom iscsi_trgt crc32c loop snd_hda_codec_nvhdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device snd tpm_tis soundcore tpm shpchp psmouse wmi serio_raw tpm_bios snd_page_alloc pcspkr pci_hotplug processor evdev button ir_core nvidia(P) lirc_imon i2c_nforce2 i2c_core lirc_dev ext3 jbd mbcache raid1 md_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif usb_storage ahci ata_generic libata ehci_hcd ohci_hcd scsi_mod usbcore nls_base forcedeth thermal fan thermal_sys [last unloaded: scsi_wait_scan] [ 230.293969] [ 230.293969] Pid: 3279, comm: modprobe Tainted: P (2.6.32-bpo.5-686 #1) Point of View [ 230.293969] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 230.293969] EIP is at dvb_usb_remote_init+0x12e/0x209 [dvb_usb] [ 230.293969] EAX: 69656148 EBX: f589b000 ECX: c14c18e4 EDX: f589b018 [ 230.293969] ESI: f5904000 EDI: 03b8 EBP: 0077 ESP: f5851e88 [ 230.293969] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 230.293969] Process modprobe (pid: 3279, ti=f585 task=f5cd4400 task.ti=f585) [ 230.293969] Stack: [ 230.293969] f589b018 f5904000 f5904000 f5904864 0001 f7c61945 f5904418 f80bb8d0 [ 230.293969] <0> f5912000 f5b8f800 f80bad88 f80bad88 f5912000 [ 230.293969] <0> f80bb894 f80ba970 f80b886d f80ba960 f5912000 f80c8c98 f591201c [ 230.293969] Call Trace: [ 230.293969] [] ? dvb_usb_device_init+0x515/0x51c [dvb_usb] [ 230.293969] [] ? rtd2831u_usb_probe+0x19/0x48 [dvb_usb_rtl2831u] [ 230.293969] [] ? usb_probe_interface+0xe7/0x130 [usbcore] [ 230.293969] [] ? driver_probe_device+0x8a/0x11e [ 230.293969] [] ? __driver_attach+0x40/0x5b [ 230.293969] [] ? bus_for_each_dev+0x37/0x5f [ 230.293969] [] ? driver_attach+0x11/0x13 [ 230.293969] [] ? __driver_attach+0x0/0x5b [ 230.293969] [] ? bus_add_driver+0x99/0x1c2 [ 230.293969] [] ? driver_register+0x87/0
