RE: PCTV 520e - DVB-C not working
Hi, I have problem getting the PCTV 520e to work with DVB-C on Linux. The video output stream is full of defects. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params is printed to the dmesg log when scanning and watching DVB-C channels. I have no problems scanning and watching DVB-T. On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an hardware problem or the quality of the tv signal. I have tried the drivers that came with kernel 3.3.4 and the latest media drivers built from source. The dvb-demod-drxk-pctv.fw firmware file is downloaded with the get_dvb_firmware script and copied to /lib/firmware. I can't figure out what the problem is. Has anyone got PCTV 520e with DVB-C to work on Linux? I have attached some log outputs below. You will need attenuator. I suspect it is LNA or some AGC :/ But guess what how many times I tried to found out the reason... Feel free to hack DRX-K driver. Problem found. I was LNA which is always enabled. LNA is connected to the demod GPIO. I will disable it since it since it is now over gaining strong signals. Great! I will be happy to test the solution. Is there a patch available? Regards,Per -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: PCTV 520e - DVB-C not working
On 19.05.2012 19:09, Per Wetterberg wrote: I have problem getting the PCTV 520e to work with DVB-C on Linux. The video output stream is full of defects. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params is printed to the dmesg log when scanning and watching DVB-C channels. I have no problems scanning and watching DVB-T. On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an hardware problem or the quality of the tv signal. I have tried the drivers that came with kernel 3.3.4 and the latest media drivers built from source. The dvb-demod-drxk-pctv.fw firmware file is downloaded with the get_dvb_firmware script and copied to /lib/firmware. I can't figure out what the problem is. Has anyone got PCTV 520e with DVB-C to work on Linux? I have attached some log outputs below. You will need attenuator. I suspect it is LNA or some AGC :/ But guess what how many times I tried to found out the reason... Feel free to hack DRX-K driver. Problem found. I was LNA which is always enabled. LNA is connected to the demod GPIO. I will disable it since it since it is now over gaining strong signals. Great! I will be happy to test the solution. Is there a patch available? Yes there is: http://patchwork.linuxtv.org/patch/11310/ http://patchwork.linuxtv.org/patch/11311/ Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: PCTV 520e - DVB-C not working
On 07.05.2012 22:44, Antti Palosaari wrote: On 05.05.2012 15:24, Per Wetterberg wrote: Hi, I have problem getting the PCTV 520e to work with DVB-C on Linux. The video output stream is full of defects. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params is printed to the dmesg log when scanning and watching DVB-C channels. I have no problems scanning and watching DVB-T. On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an hardware problem or the quality of the tv signal. I have tried the drivers that came with kernel 3.3.4 and the latest media drivers built from source. The dvb-demod-drxk-pctv.fw firmware file is downloaded with the get_dvb_firmware script and copied to /lib/firmware. I can't figure out what the problem is. Has anyone got PCTV 520e with DVB-C to work on Linux? I have attached some log outputs below. You will need attenuator. I suspect it is LNA or some AGC :/ But guess what how many times I tried to found out the reason... Feel free to hack DRX-K driver. Problem found. I was LNA which is always enabled. LNA is connected to the demod GPIO. I will disable it since it since it is now over gaining strong signals. regards Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: PCTV 520e - DVB-C not working
On 05.05.2012 15:24, Per Wetterberg wrote: Hi, I have problem getting the PCTV 520e to work with DVB-C on Linux. The video output stream is full of defects. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params is printed to the dmesg log when scanning and watching DVB-C channels. I have no problems scanning and watching DVB-T. On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an hardware problem or the quality of the tv signal. I have tried the drivers that came with kernel 3.3.4 and the latest media drivers built from source. The dvb-demod-drxk-pctv.fw firmware file is downloaded with the get_dvb_firmware script and copied to /lib/firmware. I can't figure out what the problem is. Has anyone got PCTV 520e with DVB-C to work on Linux? I have attached some log outputs below. You will need attenuator. I suspect it is LNA or some AGC :/ But guess what how many times I tried to found out the reason... Feel free to hack DRX-K driver. regards Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
PCTV 520e - DVB-C not working
Hi, I have problem getting the PCTV 520e to work with DVB-C on Linux. The video output stream is full of defects. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params is printed to the dmesg log when scanning and watching DVB-C channels. I have no problems scanning and watching DVB-T. On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an hardware problem or the quality of the tv signal. I have tried the drivers that came with kernel 3.3.4 and the latest media drivers built from source. The dvb-demod-drxk-pctv.fw firmware file is downloaded with the get_dvb_firmware script and copied to /lib/firmware. I can't figure out what the problem is. Has anyone got PCTV 520e with DVB-C to work on Linux? I have attached some log outputs below. Cheers, Per [per@tux ~]$ uname -a Linux tux 3.3.4-1.fc16.x86_64 #1 SMP Fri Apr 27 20:12:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Log from initialization on kernel 3.3.4 with latest linux media drivers built from source. *** [ 285.856249] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd [ 285.943002] usb 2-1.5: New USB device found, idVendor=2013, idProduct=0251 [ 285.943008] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 285.943013] usb 2-1.5: Product: PCTV 520e [ 285.943016] usb 2-1.5: Manufacturer: PCTV Systems [ 285.943019] usb 2-1.5: SerialNumber: 00XX [ 285.962866] Linux media interface: v0.10 [ 285.965105] Linux video capture interface: v2.00 [ 285.965113] WARNING: You are using an experimental version of the media stack. [ 285.965116] As the driver is backported to an older kernel, it doesn't offer [ 285.965119] enough quality for its usage in production. [ 285.965122] Use it with care. [ 285.965124] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 285.965127] a1ac5dc28d2b4ca78e183229f7c595ffd725241c [media] gspca - sn9c20x: Change the exposure setting of Omnivision sensors [ 285.965130] 4fb8137c43ebc0f5bc0dde6b64faa9dd1b1d7970 [media] gspca - sn9c20x: Don't do sensor update before the capture is started [ 285.965132] c4407fe86d3856f60ec711e025bbe9a0159354a3 [media] gspca - sn9c20x: Set the i2c interface speed [ 285.967402] em28xx: New device PCTV Systems PCTV 520e @ 480 Mbps (2013:0251, interface 0, class 0) [ 285.967407] em28xx: Audio Vendor Class interface 0 found [ 285.967410] em28xx: Video interface 0 found [ 285.967413] em28xx: DVB interface 0 found [ 285.967503] em28xx #0: chip ID is em2884 [ 286.261235] em28xx #0: Identified as PCTV QuatroStick nano (520e) (card=86) [ 286.261291] em28xx #0: Config register raw data: 0x78 [ 286.261294] em28xx #0: I2S Audio (5 sample rates) [ 286.261296] em28xx #0: No AC97 audio processor [ 286.277834] em28xx #0: v4l2 driver version 0.1.3 [ 286.300381] em28xx #0: V4L2 video device registered as video0 [ 286.300851] usbcore: registered new interface driver em28xx [ 286.303734] em28xx-audio.c: probing for em28xx Audio Vendor Class [ 286.303739] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 286.303743] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [ 286.304014] Em28xx: Initialized (Em28xx Audio Extension) extension [ 286.308285] WARNING: You are using an experimental version of the media stack. [ 286.308288] As the driver is backported to an older kernel, it doesn't offer [ 286.308290] enough quality for its usage in production. [ 286.308292] Use it with care. [ 286.308293] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 286.308295] a1ac5dc28d2b4ca78e183229f7c595ffd725241c [media] gspca - sn9c20x: Change the exposure setting of Omnivision sensors [ 286.308298] 4fb8137c43ebc0f5bc0dde6b64faa9dd1b1d7970 [media] gspca - sn9c20x: Don't do sensor update before the capture is started [ 286.308300] c4407fe86d3856f60ec711e025bbe9a0159354a3 [media] gspca - sn9c20x: Set the i2c interface speed [ 286.324233] drxk: status = 0x639260d9 [ 286.324239] drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz [ 287.719396] DRXK driver version 0.9.4300 [ 287.734984] drxk: frontend initialized. [ 287.738016] tda18271 3-0060: creating new instance [ 287.747206] TDA18271HD/C2 detected @ 3-0060 [ 288.087250] DVB: registering new adapter (em28xx #0) [ 288.087256] DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 288.088101] em28xx #0: Successfully loaded em28xx-dvb [ 288.088112] Em28xx: Initialized (Em28xx dvb Extension) extension Using czap: * [per@tux ~]$ czap -c comhem_zapc.conf -r TV6 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file 'comhem_zapc.conf' 1 TV6:36200:INVERSION_AUTO:6875100:FEC_3_4:QAM_64:4102:4358:1135 1 TV6: f 36200, s 6875100, i 2, fec 3, qam 3, v 0x1006, a 0x1106, s 0x46f status 00 | signal |