Update 2:
all I2C breakage is caused by i2c gates in CE6313 and TDA8290 so I just
commented-out the calls in tuner drivers for now.
Tuner detection in tda8290 breaks because it finds CE5039 at 0x60. Disabling
CE5039 using GPIO in board_init1() and enabling it in dvb_init() allows all
chips to initialize properly:
[ 130.658813] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 130.662715] saa7133[0]: found at :02:01.0, rev: 209, irq: 9, latency:
32, mmio: 0xf400
[ 130.665879] saa7133[0]: subsystem: 1461:2055, board: AverMedia AverTV
Satellite Hybrid+FM A706 [card=191,autodetected]
[ 130.669347] saa7133[0]: board init: gpio is 3500
[ 130.822347] saa7133[0]: i2c eeprom 00: 61 14 55 20 00 00 00 00 00 00 00 00
00 00 00 00
[ 130.825689] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 130.829008] saa7133[0]: i2c eeprom 20: 02 40 01 02 02 01 01 04 06 ff 00 57
ff ff ff ff
[ 130.832317] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.835627] saa7133[0]: i2c eeprom 40: 60 a0 00 c6 96 ff 05 30 8b 05 ff 40
ff ff ff ff
[ 130.838932] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.84] saa7133[0]: i2c eeprom 60: ff 89 00 c0 ff 1c 08 19 97 89 ff ff
80 15 0a ff
[ 130.845525] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.848833] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.852109] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.855351] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.858565] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.861736] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.864894] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.868021] saa7133[0]: i2c eeprom e0: 00 01 81 b0 65 07 ff ff ff ff ff ff
ff ff ff ff
[ 130.871133] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 130.930349] tuner 2-004b: Tuner -1 found with type(s) Radio TV.
[ 130.974345] tda829x 2-004b: setting tuner address to 63
[ 131.019535] tda18271 2-0063: creating new instance
[ 131.030345] TDA18271HD/C2 detected @ 2-0063
[ 131.454335] tda18271: performing RF tracking filter calibration
[ 135.778283] tda18271: RF tracking filter calibration complete
[ 135.786296] tda829x 2-004b: type set to tda8290+18271
[ 138.635047] saa7133[0]: registered device video0 [v4l2]
[ 138.639407] saa7133[0]: registered device vbi0
[ 138.643130] saa7133[0]: registered device radio0
[ 138.676190] dvb_init() allocating 1 frontend
[ 139.730238] DVB: registering new adapter (saa7133[0])
[ 139.733196] saa7134 :02:01.0: DVB: registering adapter 0 frontend 0
(Zarlink ZL10313 DVB-S)...
[ 140.321583] saa7134 ALSA driver for DMA sound loaded
[ 140.325361] saa7133[0]/alsa: saa7133[0] at 0xf400 irq 9 registered as
card -1
The card comes to life slowly: FM radio works for a couple of seconds!
With arecord | aplay, noise is played. When a radio station is tuned
(v4l2ctl -d /dev/radio0 -f something), I can hear it clearly for a 2-3 seconds,
then it fades to noise.
These errors appear in log:
[ 521.281639] tda18271c2_rf_tracking_filters_correction: [2-0063|M] error -22
on line 277
[ 521.289675] tda18271_calc_ir_measure: [2-0063|M] error -34 on line 686
[ 521.289682] tda18271_calc_bp_filter: [2-0063|M] error -34 on line 618
[ 521.289686] tda18271_calc_rf_band: [2-0063|M] error -34 on line 652
[ 521.289690] tda18271_calc_gain_taper: [2-0063|M] error -34 on line 669
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html