Moikka!
On 05/13/2015 02:11 PM, Dan Carpenter wrote:
Hello Antti Palosaari,
The patch 77bbb2b049c1: rtl2832_sdr: move from staging to media
from Jul 15, 2014, leads to the following static checker warning:
drivers/media/dvb-frontends/rtl2832_sdr.c:1265 rtl2832_sdr_s_ctrl()
warn: test_bit() bitwise op in bit number
This is harmless but messy.
drivers/media/dvb-frontends/rtl2832_sdr.c
109
110 struct rtl2832_sdr_dev {
111 #define POWER_ON (1 1)
112 #define URB_BUF(1 2)
We were supposed to use these to set -flags on the next line.
113 unsigned long flags;
114
115 struct platform_device *pdev;
116
117 struct video_device vdev;
118 struct v4l2_device v4l2_dev;
119
[ snip ]
389 dev_dbg(pdev-dev, alloc buf=%d %p (dma %llu)\n,
390 dev-buf_num, dev-buf_list[dev-buf_num],
391 (long long)dev-dma_addr[dev-buf_num]);
392 dev-flags |= USB_STATE_URB_BUF;
^
But we use USB_STATE_URB_BUF (0x1) instead of URB_BUF.
393 }
[ snip ]
1263 c-bandwidth_hz = dev-bandwidth-val;
1264
1265 if (!test_bit(POWER_ON, dev-flags))
The original intent of the code was we test if (dev-flags POWER_ON)
but really what this is doing is if (dev-flags (1 POWER_ON))
which is fine because we do it consistently, but it's not pretty and it
causes static checkers to complain (and rightfully so).
1266 return 0;
1267
1268 if (fe-ops.tuner_ops.set_params)
1269 ret = fe-ops.tuner_ops.set_params(fe);
1270 else
1271 ret = 0;
1272 break;
1273 default:
If you wish, you could fix those. Otherwise I will check issues pointed
and correct. Lets say I will wait at least one week your patch.
[At the some point I am going to rewrote that USB streaming code as I am
not happy with it. Also I have one device which needs to stream data
both ways, from device to computer and from computer to device, which
should be take into account.]
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html