Re: [PATCH - Omapzoom][ONENAND] Add synchronous burst support
[EMAIL PROTECTED] wrote:
From: Vimal Singh [EMAIL PROTECTED]
Following patch taken over the omapzoom.org tree adds
synchronous burst read support to the OMAP2/3 onenand driver.
Signed-off-by: Vimal Singh [EMAIL PROTECTED]
Signed-off-by: Nishant Kamat [EMAIL PROTECTED]
---
arch/arm/mach-omap2/board-3430sdp-flash.c | 59 +++---
drivers/mtd/onenand/Kconfig |6 +++
2 files changed, 60 insertions(+), 5 deletions(-)
Index: omapkernel/drivers/mtd/onenand/Kconfig
===
--- omapkernel.orig/drivers/mtd/onenand/Kconfig 2008-09-08 12:35:43.0
+0530
+++ omapkernel/drivers/mtd/onenand/Kconfig 2008-09-08 13:00:39.0
+0530
@@ -70,4 +70,10 @@
The simulator may simulate various OneNAND flash chips for the
OneNAND MTD layer.
+config MTD_ONENAND_SYNC_BURST_READ
+ bool OneNand Synchronous burst read support
+ help
+ Support for synchronous burst reads for a OneNand flash
+ device
+
Is this necessary? N800 / N810 have always supported synchronous burst read
without this config option.
endif # MTD_ONENAND
Index: omapkernel/arch/arm/mach-omap2/board-3430sdp-flash.c
===
--- omapkernel.orig/arch/arm/mach-omap2/board-3430sdp-flash.c 2008-09-08
12:35:43.0 +0530
+++ omapkernel/arch/arm/mach-omap2/board-3430sdp-flash.c2008-09-08
13:00:39.0 +0530
@@ -76,8 +76,16 @@
};
struct gpmc_cs_config pdc_onenand_gpmc_setting[] = {
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ {0x60801200, 0xF0900, 0x00030200, 0x0F040901, 0x0109100A, 0x1F06},
+#else
{0x1200, 0x000F0F01, 0x00030301, 0x0F040F04, 0x010F1010, 0x1F06},
+#endif
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ {0x62801201, 0xF1000, 0x00030200, 0x0F041002, 0x02101013, 0x1F06}
+#else
{0x1200, 0x000F0F01, 0x00030301, 0x0F040F04, 0x010F1010, 0x1F06}
+#endif
};
struct gpmc_cs_config fpga_gpmc_setting[] = {
@@ -252,15 +260,56 @@
.resource = sdp_nand_resource,
};
-/*
- * sdp_onenand_setup - The function configures the onenand flash.
- * @onenand_base: Onenand base address
+static unsigned short omap2_onenand_readw(void __iomem *addr)
+{
+ return readw(addr);
+}
+
+static void omap2_onenand_writew(unsigned short value, void __iomem *addr)
+{
+ writew(value, addr);
+}
+
+static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
+ int freq)
+{
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ u32 reg;
+
+ /* Configure OneNAND for sync read */
+ reg = omap2_onenand_readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg = ~((0x7 ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 9));
+ reg |= (0x06 ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_SYNC_READ |
+ ONENAND_SYS_CFG1_BL_8 | 0x04;
+ omap2_onenand_writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, 0xf1000);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, 0x00030200);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, 0x0f041002);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG5, 0x02101013);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG6, 0x1f06);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, 0x62801201);
Are you aware that synchronous timings may be affected by frequency scaling.
+#endif
+ return 0;
+}
+
+/**
+ * sdp_onenand_setup - Set the onenand sync mode
+ * @onenand_base: The onenand base address in GPMC memory map
*
- * @return int:Currently always returning zero.
*/
static int sdp_onenand_setup(void __iomem *onenand_base, int freq)
{
- /* Onenand setup does nothing at present */
+ struct omap_onenand_platform_data *datap = sdp_onenand_data;
+ struct device *dev = sdp_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(datap-cs, onenand_base, freq) 0) {
+ dev_err(dev, Unable to set synchronous mode\n);
+ return -EINVAL;
+ }
+
return 0;
}
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH - Omapzoom][ONENAND] Add synchronous burst support
From: Vimal Singh [EMAIL PROTECTED]
Following patch taken over the omapzoom.org tree adds
synchronous burst read support to the OMAP2/3 onenand driver.
Signed-off-by: Vimal Singh [EMAIL PROTECTED]
Signed-off-by: Nishant Kamat [EMAIL PROTECTED]
---
arch/arm/mach-omap2/board-3430sdp-flash.c | 59 +++---
drivers/mtd/onenand/Kconfig |6 +++
2 files changed, 60 insertions(+), 5 deletions(-)
Index: omapkernel/drivers/mtd/onenand/Kconfig
===
--- omapkernel.orig/drivers/mtd/onenand/Kconfig 2008-09-08 12:35:43.0
+0530
+++ omapkernel/drivers/mtd/onenand/Kconfig 2008-09-08 13:00:39.0
+0530
@@ -70,4 +70,10 @@
The simulator may simulate various OneNAND flash chips for the
OneNAND MTD layer.
+config MTD_ONENAND_SYNC_BURST_READ
+ bool OneNand Synchronous burst read support
+ help
+ Support for synchronous burst reads for a OneNand flash
+ device
+
endif # MTD_ONENAND
Index: omapkernel/arch/arm/mach-omap2/board-3430sdp-flash.c
===
--- omapkernel.orig/arch/arm/mach-omap2/board-3430sdp-flash.c 2008-09-08
12:35:43.0 +0530
+++ omapkernel/arch/arm/mach-omap2/board-3430sdp-flash.c2008-09-08
13:00:39.0 +0530
@@ -76,8 +76,16 @@
};
struct gpmc_cs_config pdc_onenand_gpmc_setting[] = {
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ {0x60801200, 0xF0900, 0x00030200, 0x0F040901, 0x0109100A, 0x1F06},
+#else
{0x1200, 0x000F0F01, 0x00030301, 0x0F040F04, 0x010F1010, 0x1F06},
+#endif
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ {0x62801201, 0xF1000, 0x00030200, 0x0F041002, 0x02101013, 0x1F06}
+#else
{0x1200, 0x000F0F01, 0x00030301, 0x0F040F04, 0x010F1010, 0x1F06}
+#endif
};
struct gpmc_cs_config fpga_gpmc_setting[] = {
@@ -252,15 +260,56 @@
.resource = sdp_nand_resource,
};
-/*
- * sdp_onenand_setup - The function configures the onenand flash.
- * @onenand_base: Onenand base address
+static unsigned short omap2_onenand_readw(void __iomem *addr)
+{
+ return readw(addr);
+}
+
+static void omap2_onenand_writew(unsigned short value, void __iomem *addr)
+{
+ writew(value, addr);
+}
+
+static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
+ int freq)
+{
+#ifdef CONFIG_MTD_ONENAND_SYNC_BURST_READ
+ u32 reg;
+
+ /* Configure OneNAND for sync read */
+ reg = omap2_onenand_readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg = ~((0x7 ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 9));
+ reg |= (0x06 ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_SYNC_READ |
+ ONENAND_SYS_CFG1_BL_8 | 0x04;
+ omap2_onenand_writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, 0xf1000);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, 0x00030200);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, 0x0f041002);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG5, 0x02101013);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG6, 0x1f06);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, 0x62801201);
+#endif
+ return 0;
+}
+
+/**
+ * sdp_onenand_setup - Set the onenand sync mode
+ * @onenand_base: The onenand base address in GPMC memory map
*
- * @return int:Currently always returning zero.
*/
static int sdp_onenand_setup(void __iomem *onenand_base, int freq)
{
- /* Onenand setup does nothing at present */
+ struct omap_onenand_platform_data *datap = sdp_onenand_data;
+ struct device *dev = sdp_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(datap-cs, onenand_base, freq) 0) {
+ dev_err(dev, Unable to set synchronous mode\n);
+ return -EINVAL;
+ }
+
return 0;
}
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
