From: Ohad Ben-Cohen <oh...@ti.com>
The wl1271 device is using a reference clock that may change
between board to board.
Make the ref_clock parameter configurable by the board
files that set up the device, instead of having a hard coded
value in the driver source itself.
Signed-off-by: Ohad Ben-Cohen <oh...@ti.com>
---
drivers/net/wireless/wl12xx/wl1271.h | 1 +
drivers/net/wireless/wl12xx/wl1271_boot.c | 13 +++++++++----
drivers/net/wireless/wl12xx/wl1271_boot.h | 1 -
drivers/net/wireless/wl12xx/wl1271_sdio.c | 2 ++
drivers/net/wireless/wl12xx/wl1271_spi.c | 2 ++
include/linux/wl12xx.h | 1 +
6 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1271.h
b/drivers/net/wireless/wl12xx/wl1271.h
index 2df57cc..cb3126d 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -362,6 +362,7 @@ struct wl1271 {
void (*set_embedded_data)(void *priv);
int irq;
+ int ref_clock;
spinlock_t wl_lock;
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c
b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 1a36d8a..fa1b8b9 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -455,17 +455,22 @@ int wl1271_boot(struct wl1271 *wl)
{
int ret = 0;
u32 tmp, clk, pause;
+ int ref_clock = wl->ref_clock;
wl1271_boot_hw_version(wl);
- if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
+ if (ref_clock == 0 || ref_clock == 2 || ref_clock == 4)
/* ref clk: 19.2/38.4/38.4-XTAL */
clk = 0x3;
- else if (REF_CLOCK == 1 || REF_CLOCK == 3)
+ else if (ref_clock == 1 || ref_clock == 3)
/* ref clk: 26/52 */
clk = 0x5;
+ else {
+ ret = -EINVAL;
+ goto out;
+ }
- if (REF_CLOCK != 0) {
+ if (ref_clock != 0) {
u16 val;
/* Set clock type (open drain) */
val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -514,7 +519,7 @@ int wl1271_boot(struct wl1271 *wl)
wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
/* 2 */
- clk |= (REF_CLOCK << 1) << 4;
+ clk |= (ref_clock << 1) << 4;
wl1271_write32(wl, DRPW_SCRATCH_START, clk);
wl1271_set_partition(wl, &part_table[PART_WORK]);
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h
b/drivers/net/wireless/wl12xx/wl1271_boot.h
index f829699..f73b0b1 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -46,7 +46,6 @@ struct wl1271_static_data {
/* delay between retries */
#define INIT_LOOP_DELAY 50
-#define REF_CLOCK 2
#define WU_COUNTER_PAUSE_VAL 0x3FF
#define WELP_ARM_COMMAND_VAL 0x4
diff --git a/drivers/net/wireless/wl12xx/wl1271_sdio.c
b/drivers/net/wireless/wl12xx/wl1271_sdio.c
index 0af0dce..4ed097f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1271_sdio.c
@@ -270,6 +270,8 @@ static int wl1271_plat_probe(struct platform_device *pdev)
wl->if_plat_priv = pdev;
platform_set_drvdata(pdev, wl);
+ wl->ref_clock = pdata->board_ref_clock;
+
wl->set_embedded_data = pdata->set_embedded_data;
if (!wl->set_embedded_data) {
wl1271_error("set embedded_data func missing in platform data");
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c
b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 85a167f..2cb125b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -373,6 +373,8 @@ static int __devinit wl1271_probe(struct spi_device *spi)
goto out_free;
}
+ wl->ref_clock = pdata->ref_clock;
+
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1271_error("irq missing in platform data");
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 4106184..9053d9c 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -31,6 +31,7 @@ struct wl12xx_platform_data {
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
+ int board_ref_clock;
};
#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
