[PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
From: Kevin Hilman When a GPIO bank is freed or shutdown, ensure that the banks dbck_enable_mask is cleared also. Otherwise, context restore on subsequent off-mode transition will restore previous value from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix, ensure that bank->dbck_enable_mask is cleared when the bank is freed/shutdown so debounce state doesn't persist. Special thanks to Grazvydas Ignotas for pointing out a bug in an earlier version that would've disabled debounce on any runtime PM transition. Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Signed-off-by: Kevin Hilman --- v2: only clear mask in free/shutdown, not in runtime PM paths, clarified changelog Applies on v3.7-rc2. drivers/gpio/gpio-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..113b167 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + bank->dbck_enable_mask = 0; } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
On Thursday 25 October 2012 04:24 AM, Jon Hunter wrote: On 10/24/2012 12:10 PM, Kevin Hilman wrote: From: Kevin Hilman When a GPIO bank is freed or shutdown, ensure that the banks dbck_enable_mask is cleared also. Otherwise, context restore on subsequent off-mode transition will restore previous value from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix, ensure that bank->dbck_enable_mask is cleared when the bank is freed/shutdown so debounce state doesn't persist. The freed part is fine but I don't understand why it needs to be done on _a_ gpio irq shutdown callback where IRQs related configuration on that one GPIO needs to be cleared. De-bounce clock is surely not IRQ related configuration. Special thanks to Grazvydas Ignotas for pointing out a bug in an earlier version that would've disabled debounce on any runtime PM transition. Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Signed-off-by: Kevin Hilman --- v2: only clear mask in free/shutdown, not in runtime PM paths, clarified changelog Applies on v3.7-rc2. drivers/gpio/gpio-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..113b167 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + bank->dbck_enable_mask = 0; } Does this need to be ... + bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); + _gpio_dbck_disable(bank); Yes, its a per bank clock. There is an alternate. See below. There could be more than one gpio using debounce and so we should only clear the appropriate bit. Also after clearing a bit we could see if we can disable the debounce clock too. When I mentioned the clearing in gpio_free() path will do trick, I had something like below in mind. diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index dee2856..8574105 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -629,8 +629,10 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) * If this is the last gpio to be freed in the bank, * disable the bank module. */ - if (!bank->mod_usage) + if (!bank->mod_usage) { + bank->dbck_enable_mask = 0; pm_runtime_put(bank->dev); + } } /* This patch should be enough according to me unless and until I am missing mask clear need in irq_shutdown path. It will also take care of disabling of debounce clock as part of runtime suspend callback. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
On 10/25/2012 02:00 AM, Santosh Shilimkar wrote: > On Thursday 25 October 2012 04:24 AM, Jon Hunter wrote: >> >> On 10/24/2012 12:10 PM, Kevin Hilman wrote: >>> From: Kevin Hilman >>> >>> When a GPIO bank is freed or shutdown, ensure that the banks >>> dbck_enable_mask is cleared also. Otherwise, context restore on >>> subsequent off-mode transition will restore previous value from the >>> shadow copies (bank->context.debounce*) leading to mismatch state >>> between driver state and hardware state. >>> >>> This was discovered when board code was doing >>> >>>gpio_request_one() >>>gpio_set_debounce() >>>gpio_free() >>> >>> which was leaving the GPIO debounce settings in a confused state. If >>> that GPIO bank is subsequently used with off-mode enabled, bogus state >>> would be restored, leaving GPIO debounce enabled which then prevented >>> the CORE powerdomain from transitioning. >>> >>> To fix, ensure that bank->dbck_enable_mask is cleared when the bank >>> is freed/shutdown so debounce state doesn't persist. > The freed part is fine but I don't understand why it needs to be done > on _a_ gpio irq shutdown callback where IRQs related configuration > on that one GPIO needs to be cleared. De-bounce clock is surely not IRQ > related configuration. If we are freeing the IRQs related to gpio and resetting the gpio, then I don't see why we should not. We should not leave the debounce clock on if these gpios are no longer being used. >>> Special thanks to Grazvydas Ignotas for pointing out a bug in an >>> earlier version that would've disabled debounce on any runtime PM >>> transition. >>> >>> Reported-by: Paul Walmsley >>> Cc: Igor Grinberg >>> Cc: Grazvydas Ignotas >>> Signed-off-by: Kevin Hilman >>> --- >>> v2: only clear mask in free/shutdown, not in runtime PM paths, >>> clarified changelog >>> Applies on v3.7-rc2. >>> >>> drivers/gpio/gpio-omap.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >>> index 94cbc84..113b167 100644 >>> --- a/drivers/gpio/gpio-omap.c >>> +++ b/drivers/gpio/gpio-omap.c >>> @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, >>> int gpio) >>> _set_gpio_irqenable(bank, gpio, 0); >>> _clear_gpio_irqstatus(bank, gpio); >>> _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); >>> +bank->dbck_enable_mask = 0; >>> } >> >> Does this need to be ... >> >> +bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); >> +_gpio_dbck_disable(bank); >> > Yes, its a per bank clock. There is an alternate. See below. > >> There could be more than one gpio using debounce and so we should only >> clear the appropriate bit. Also after clearing a bit we could see if we >> can disable the debounce clock too. >> > When I mentioned the clearing in gpio_free() path will do trick, I had > something like below in mind. > > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c > index dee2856..8574105 100644 > --- a/drivers/gpio/gpio-omap.c > +++ b/drivers/gpio/gpio-omap.c > @@ -629,8 +629,10 @@ static void omap_gpio_free(struct gpio_chip *chip, > unsigned offset) > * If this is the last gpio to be freed in the bank, > * disable the bank module. > */ > -if (!bank->mod_usage) > +if (!bank->mod_usage) { > +bank->dbck_enable_mask = 0; > pm_runtime_put(bank->dev); > +} However, with this we could be leaving the debounce clock on longer than needed. I think we need to call _gpio_dbck_disable() each time we free a gpio and this function will determine if it can turn off the debounce clock. In fact, there appears to be another bug in the current driver, that we do not clear the debounce_en register when freeing the gpio. Your patch addresses this, but I think that debounce should be disabled when a gpio is freed and not just when the last one is freed. Also, with the above change, can't we still run into the original problem? In other words, if a gpio is freed, but there is still another one active in the back that is not using debounce, then we could restore a incorrect debounce context because we have not clean-up the debounce settings? So may be we need to add a _clear_gpio_debounce() function and call this when freeing a gpio. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
On Thursday 25 October 2012 06:41 PM, Jon Hunter wrote: On 10/25/2012 02:00 AM, Santosh Shilimkar wrote: On Thursday 25 October 2012 04:24 AM, Jon Hunter wrote: On 10/24/2012 12:10 PM, Kevin Hilman wrote: From: Kevin Hilman When a GPIO bank is freed or shutdown, ensure that the banks dbck_enable_mask is cleared also. Otherwise, context restore on subsequent off-mode transition will restore previous value from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix, ensure that bank->dbck_enable_mask is cleared when the bank is freed/shutdown so debounce state doesn't persist. The freed part is fine but I don't understand why it needs to be done on _a_ gpio irq shutdown callback where IRQs related configuration on that one GPIO needs to be cleared. De-bounce clock is surely not IRQ related configuration. If we are freeing the IRQs related to gpio and resetting the gpio, then I don't see why we should not. We should not leave the debounce clock on if these gpios are no longer being used. Sure which happens in free() anyways. Special thanks to Grazvydas Ignotas for pointing out a bug in an earlier version that would've disabled debounce on any runtime PM transition. Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Signed-off-by: Kevin Hilman --- v2: only clear mask in free/shutdown, not in runtime PM paths, clarified changelog Applies on v3.7-rc2. drivers/gpio/gpio-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..113b167 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); +bank->dbck_enable_mask = 0; } Does this need to be ... +bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); +_gpio_dbck_disable(bank); Yes, its a per bank clock. There is an alternate. See below. There could be more than one gpio using debounce and so we should only clear the appropriate bit. Also after clearing a bit we could see if we can disable the debounce clock too. When I mentioned the clearing in gpio_free() path will do trick, I had something like below in mind. diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index dee2856..8574105 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -629,8 +629,10 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) * If this is the last gpio to be freed in the bank, * disable the bank module. */ -if (!bank->mod_usage) +if (!bank->mod_usage) { +bank->dbck_enable_mask = 0; pm_runtime_put(bank->dev); +} However, with this we could be leaving the debounce clock on longer than needed. I think we need to call _gpio_dbck_disable() each time we free a gpio and this function will determine if it can turn off the debounce clock. The point is you can't disable the debounce clock if the back in use. But I get your point. In case other in use GPIOs from bank doesn't need debouce feature, we can turn off the debouce clock. In fact, there appears to be another bug in the current driver, that we do not clear the debounce_en register when freeing the gpio. Your patch addresses this, but I think that debounce should be disabled when a gpio is freed and not just when the last one is freed. I agree. Just go ahead and spin the patch. Also, with the above change, can't we still run into the original problem? In other words, if a gpio is freed, but there is still another one active in the back that is not using debounce, then we could restore a incorrect debounce context because we have not clean-up the debounce settings? Yep. Just mentioned above. So may be we need to add a _clear_gpio_debounce() function and call this when freeing a gpio. Sounds good. This function can track the debounce back usage and based on that do the deb-ounce clean-up. Regards santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
Jon Hunter writes: > On 10/24/2012 12:10 PM, Kevin Hilman wrote: >> From: Kevin Hilman >> >> When a GPIO bank is freed or shutdown, ensure that the banks >> dbck_enable_mask is cleared also. Otherwise, context restore on >> subsequent off-mode transition will restore previous value from the >> shadow copies (bank->context.debounce*) leading to mismatch state >> between driver state and hardware state. >> >> This was discovered when board code was doing >> >> gpio_request_one() >> gpio_set_debounce() >> gpio_free() >> >> which was leaving the GPIO debounce settings in a confused state. If >> that GPIO bank is subsequently used with off-mode enabled, bogus state >> would be restored, leaving GPIO debounce enabled which then prevented >> the CORE powerdomain from transitioning. >> >> To fix, ensure that bank->dbck_enable_mask is cleared when the bank >> is freed/shutdown so debounce state doesn't persist. >> >> Special thanks to Grazvydas Ignotas for pointing out a bug in an >> earlier version that would've disabled debounce on any runtime PM >> transition. >> >> Reported-by: Paul Walmsley >> Cc: Igor Grinberg >> Cc: Grazvydas Ignotas >> Signed-off-by: Kevin Hilman >> --- >> v2: only clear mask in free/shutdown, not in runtime PM paths, >> clarified changelog >> Applies on v3.7-rc2. >> >> drivers/gpio/gpio-omap.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >> index 94cbc84..113b167 100644 >> --- a/drivers/gpio/gpio-omap.c >> +++ b/drivers/gpio/gpio-omap.c >> @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) >> _set_gpio_irqenable(bank, gpio, 0); >> _clear_gpio_irqstatus(bank, gpio); >> _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); >> +bank->dbck_enable_mask = 0; >> } > > Does this need to be ... > > + bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); > + _gpio_dbck_disable(bank); > > There could be more than one gpio using debounce and so we should only > clear the appropriate bit. Also after clearing a bit we could see if we > can disable the debounce clock too. Sigh, you're right. I'm clearly in too much of a rush with this one. Thanks for taking the time to review. v3 coming right up using your suggestsion after some testing just to be sure it fixes that bug. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
Jon Hunter writes: > On 10/25/2012 02:00 AM, Santosh Shilimkar wrote: >> On Thursday 25 October 2012 04:24 AM, Jon Hunter wrote: >>> >>> On 10/24/2012 12:10 PM, Kevin Hilman wrote: From: Kevin Hilman When a GPIO bank is freed or shutdown, ensure that the banks dbck_enable_mask is cleared also. Otherwise, context restore on subsequent off-mode transition will restore previous value from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix, ensure that bank->dbck_enable_mask is cleared when the bank is freed/shutdown so debounce state doesn't persist. >> The freed part is fine but I don't understand why it needs to be done >> on _a_ gpio irq shutdown callback where IRQs related configuration >> on that one GPIO needs to be cleared. De-bounce clock is surely not IRQ >> related configuration. > > If we are freeing the IRQs related to gpio and resetting the gpio, then > I don't see why we should not. We should not leave the debounce clock on > if these gpios are no longer being used. > Special thanks to Grazvydas Ignotas for pointing out a bug in an earlier version that would've disabled debounce on any runtime PM transition. Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Signed-off-by: Kevin Hilman --- v2: only clear mask in free/shutdown, not in runtime PM paths, clarified changelog Applies on v3.7-rc2. drivers/gpio/gpio-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..113b167 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); +bank->dbck_enable_mask = 0; } >>> >>> Does this need to be ... >>> >>> +bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); >>> +_gpio_dbck_disable(bank); >>> >> Yes, its a per bank clock. There is an alternate. See below. >> >>> There could be more than one gpio using debounce and so we should only >>> clear the appropriate bit. Also after clearing a bit we could see if we >>> can disable the debounce clock too. >>> >> When I mentioned the clearing in gpio_free() path will do trick, I had >> something like below in mind. >> >> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >> index dee2856..8574105 100644 >> --- a/drivers/gpio/gpio-omap.c >> +++ b/drivers/gpio/gpio-omap.c >> @@ -629,8 +629,10 @@ static void omap_gpio_free(struct gpio_chip *chip, >> unsigned offset) >> * If this is the last gpio to be freed in the bank, >> * disable the bank module. >> */ >> -if (!bank->mod_usage) >> +if (!bank->mod_usage) { >> +bank->dbck_enable_mask = 0; >> pm_runtime_put(bank->dev); >> +} > > However, with this we could be leaving the debounce clock on longer than > needed. I think we need to call _gpio_dbck_disable() each time we free a > gpio and this function will determine if it can turn off the debounce > clock. > > In fact, there appears to be another bug in the current driver, that we > do not clear the debounce_en register when freeing the gpio. Your patch > addresses this, but I think that debounce should be disabled when a gpio > is freed and not just when the last one is freed. > > Also, with the above change, can't we still run into the original > problem? In other words, if a gpio is freed, but there is still another > one active in the back that is not using debounce, then we could restore > a incorrect debounce context because we have not clean-up the debounce > settings? > > So may be we need to add a _clear_gpio_debounce() function and > call this when freeing a gpio. Care to cook up a patch for this, on top of v3 of $SUBJECT patch? Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
On 10/25/2012 11:30 AM, Kevin Hilman wrote: > Jon Hunter writes: > >> On 10/25/2012 02:00 AM, Santosh Shilimkar wrote: >>> On Thursday 25 October 2012 04:24 AM, Jon Hunter wrote: On 10/24/2012 12:10 PM, Kevin Hilman wrote: > From: Kevin Hilman > > When a GPIO bank is freed or shutdown, ensure that the banks > dbck_enable_mask is cleared also. Otherwise, context restore on > subsequent off-mode transition will restore previous value from the > shadow copies (bank->context.debounce*) leading to mismatch state > between driver state and hardware state. > > This was discovered when board code was doing > >gpio_request_one() >gpio_set_debounce() >gpio_free() > > which was leaving the GPIO debounce settings in a confused state. If > that GPIO bank is subsequently used with off-mode enabled, bogus state > would be restored, leaving GPIO debounce enabled which then prevented > the CORE powerdomain from transitioning. > > To fix, ensure that bank->dbck_enable_mask is cleared when the bank > is freed/shutdown so debounce state doesn't persist. >>> The freed part is fine but I don't understand why it needs to be done >>> on _a_ gpio irq shutdown callback where IRQs related configuration >>> on that one GPIO needs to be cleared. De-bounce clock is surely not IRQ >>> related configuration. >> >> If we are freeing the IRQs related to gpio and resetting the gpio, then >> I don't see why we should not. We should not leave the debounce clock on >> if these gpios are no longer being used. >> > Special thanks to Grazvydas Ignotas for pointing out a bug in an > earlier version that would've disabled debounce on any runtime PM > transition. > > Reported-by: Paul Walmsley > Cc: Igor Grinberg > Cc: Grazvydas Ignotas > Signed-off-by: Kevin Hilman > --- > v2: only clear mask in free/shutdown, not in runtime PM paths, > clarified changelog > Applies on v3.7-rc2. > > drivers/gpio/gpio-omap.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c > index 94cbc84..113b167 100644 > --- a/drivers/gpio/gpio-omap.c > +++ b/drivers/gpio/gpio-omap.c > @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, > int gpio) > _set_gpio_irqenable(bank, gpio, 0); > _clear_gpio_irqstatus(bank, gpio); > _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); > +bank->dbck_enable_mask = 0; > } Does this need to be ... +bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); +_gpio_dbck_disable(bank); >>> Yes, its a per bank clock. There is an alternate. See below. >>> There could be more than one gpio using debounce and so we should only clear the appropriate bit. Also after clearing a bit we could see if we can disable the debounce clock too. >>> When I mentioned the clearing in gpio_free() path will do trick, I had >>> something like below in mind. >>> >>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c >>> index dee2856..8574105 100644 >>> --- a/drivers/gpio/gpio-omap.c >>> +++ b/drivers/gpio/gpio-omap.c >>> @@ -629,8 +629,10 @@ static void omap_gpio_free(struct gpio_chip *chip, >>> unsigned offset) >>> * If this is the last gpio to be freed in the bank, >>> * disable the bank module. >>> */ >>> -if (!bank->mod_usage) >>> +if (!bank->mod_usage) { >>> +bank->dbck_enable_mask = 0; >>> pm_runtime_put(bank->dev); >>> +} >> >> However, with this we could be leaving the debounce clock on longer than >> needed. I think we need to call _gpio_dbck_disable() each time we free a >> gpio and this function will determine if it can turn off the debounce >> clock. >> >> In fact, there appears to be another bug in the current driver, that we >> do not clear the debounce_en register when freeing the gpio. Your patch >> addresses this, but I think that debounce should be disabled when a gpio >> is freed and not just when the last one is freed. >> >> Also, with the above change, can't we still run into the original >> problem? In other words, if a gpio is freed, but there is still another >> one active in the back that is not using debounce, then we could restore >> a incorrect debounce context because we have not clean-up the debounce >> settings? >> >> So may be we need to add a _clear_gpio_debounce() function and >> call this when freeing a gpio. > > Care to cook up a patch for this, on top of v3 of $SUBJECT patch? Yes will do. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset
On 10/24/2012 12:10 PM, Kevin Hilman wrote: > From: Kevin Hilman > > When a GPIO bank is freed or shutdown, ensure that the banks > dbck_enable_mask is cleared also. Otherwise, context restore on > subsequent off-mode transition will restore previous value from the > shadow copies (bank->context.debounce*) leading to mismatch state > between driver state and hardware state. > > This was discovered when board code was doing > > gpio_request_one() > gpio_set_debounce() > gpio_free() > > which was leaving the GPIO debounce settings in a confused state. If > that GPIO bank is subsequently used with off-mode enabled, bogus state > would be restored, leaving GPIO debounce enabled which then prevented > the CORE powerdomain from transitioning. > > To fix, ensure that bank->dbck_enable_mask is cleared when the bank > is freed/shutdown so debounce state doesn't persist. > > Special thanks to Grazvydas Ignotas for pointing out a bug in an > earlier version that would've disabled debounce on any runtime PM > transition. > > Reported-by: Paul Walmsley > Cc: Igor Grinberg > Cc: Grazvydas Ignotas > Signed-off-by: Kevin Hilman > --- > v2: only clear mask in free/shutdown, not in runtime PM paths, > clarified changelog > Applies on v3.7-rc2. > > drivers/gpio/gpio-omap.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c > index 94cbc84..113b167 100644 > --- a/drivers/gpio/gpio-omap.c > +++ b/drivers/gpio/gpio-omap.c > @@ -539,6 +539,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) > _set_gpio_irqenable(bank, gpio, 0); > _clear_gpio_irqstatus(bank, gpio); > _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); > + bank->dbck_enable_mask = 0; > } Does this need to be ... + bank->dbck_enable_mask &= ~(GPIO_BIT(bank, gpio)); + _gpio_dbck_disable(bank); There could be more than one gpio using debounce and so we should only clear the appropriate bit. Also after clearing a bit we could see if we can disable the debounce clock too. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html