Add support for vmmc_aux to switch to 1.8v. Also use "iov" instead of
"vdd" to indicate io voltage. This is in preparation for adding support
for io signal voltage switch.

Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
 drivers/mmc/host/omap_hsmmc.c |   48 +++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d884d8f..9c13157 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -244,11 +244,12 @@ static int omap_hsmmc_get_cover_state(struct device *dev)
        return mmc_gpio_get_cd(host->mmc);
 }
 
-static int omap_hsmmc_enable_supply(struct mmc_host *mmc)
+static int omap_hsmmc_enable_supply(struct mmc_host *mmc, int iov)
 {
        int ret;
        struct omap_hsmmc_host *host = mmc_priv(mmc);
        struct mmc_ios *ios = &mmc->ios;
+       int uvoltage;
 
        if (mmc->supply.vmmc) {
                ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
@@ -257,7 +258,25 @@ static int omap_hsmmc_enable_supply(struct mmc_host *mmc)
        }
 
        /* Enable interface voltage rail, if needed */
-       if (mmc->supply.vqmmc && !host->vqmmc_enabled) {
+       if (mmc->supply.vqmmc) {
+               if (host->vqmmc_enabled) {
+                       ret = regulator_disable(mmc->supply.vqmmc);
+                       if (ret) {
+                               dev_err(mmc_dev(mmc),
+                                       "vmmc_aux reg disable failed\n");
+                               goto err_vqmmc;
+                       }
+                       host->vqmmc_enabled = 0;
+               }
+
+               uvoltage = (iov == VDD_165_195) ? VDD_1V8 : VDD_3V0;
+               ret = regulator_set_voltage(mmc->supply.vqmmc, uvoltage,
+                                           uvoltage);
+               if (ret) {
+                       dev_err(mmc_dev(mmc), "vmmc_aux set voltage failed\n");
+                       goto err_vqmmc;
+               }
+
                ret = regulator_enable(mmc->supply.vqmmc);
                if (ret) {
                        dev_err(mmc_dev(mmc), "vmmc_aux reg enable failed\n");
@@ -309,22 +328,19 @@ err_set_ocr:
 }
 
 static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on,
-                               int vdd)
+                               int iov)
 {
        int ret;
+       int uvoltage;
 
        if (!host->pbias)
                return 0;
 
        if (power_on) {
-               if (vdd <= VDD_165_195)
-                       ret = regulator_set_voltage(host->pbias, VDD_1V8,
-                                                   VDD_1V8);
-               else
-                       ret = regulator_set_voltage(host->pbias, VDD_3V0,
-                                                   VDD_3V0);
-               if (ret < 0) {
-                       dev_err(host->dev, "pbias set voltage fail\n");
+               uvoltage = (iov <= VDD_165_195) ? VDD_1V8 : VDD_3V0;
+               ret = regulator_set_voltage(host->pbias, uvoltage, uvoltage);
+               if (ret) {
+                       dev_err(host->dev, "pbias set voltage failed\n");
                        return ret;
                }
 
@@ -348,7 +364,7 @@ static int omap_hsmmc_set_pbias(struct omap_hsmmc_host 
*host, bool power_on,
        return 0;
 }
 
-static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
+static int omap_hsmmc_set_power(struct device *dev, int power_on, int iov)
 {
        struct omap_hsmmc_host *host =
                platform_get_drvdata(to_platform_device(dev));
@@ -363,7 +379,7 @@ static int omap_hsmmc_set_power(struct device *dev, int 
power_on, int vdd)
                return 0;
 
        if (mmc_pdata(host)->before_set_reg)
-               mmc_pdata(host)->before_set_reg(dev, power_on, vdd);
+               mmc_pdata(host)->before_set_reg(dev, power_on, iov);
 
        ret = omap_hsmmc_set_pbias(host, false, 0);
        if (ret)
@@ -383,11 +399,11 @@ static int omap_hsmmc_set_power(struct device *dev, int 
power_on, int vdd)
         * chips/cards need an interface voltage rail too.
         */
        if (power_on) {
-               ret = omap_hsmmc_enable_supply(mmc);
+               ret = omap_hsmmc_enable_supply(mmc, iov);
                if (ret)
                        return ret;
 
-               ret = omap_hsmmc_set_pbias(host, true, vdd);
+               ret = omap_hsmmc_set_pbias(host, true, iov);
                if (ret)
                        goto err_set_voltage;
        } else {
@@ -397,7 +413,7 @@ static int omap_hsmmc_set_power(struct device *dev, int 
power_on, int vdd)
        }
 
        if (mmc_pdata(host)->after_set_reg)
-               mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
+               mmc_pdata(host)->after_set_reg(dev, power_on, iov);
 
        return 0;
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to