Tero Kristo writes:
> From: Tero Kristo
>
> Previously omap_sram_idle() did not know about the difference between ON and
> INACTIVE states, which complicated the state handling in these cases. Now,
> the following changes are done in the idle logic:
>
> - Check for IO-chain arming is changed to reflect desired state (RET)
> - UART clocks will be disabled if we attempt to enter INACTIVE (this allows
> the state change to actually happen)
>
> Signed-off-by: Tero Kristo
Looks good, will add to PM branch after issues with patch 1 are resolved.
Kevin
> ---
> arch/arm/mach-omap2/pm34xx.c | 14 +++---
> 1 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 3b62c96..574492e 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -391,6 +391,7 @@ void omap_sram_idle(void)
> mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
> switch (mpu_next_state) {
> case PWRDM_POWER_ON:
> + case PWRDM_POWER_INACTIVE:
> case PWRDM_POWER_RET:
> /* No need to save context */
> save_state = 0;
> @@ -460,9 +461,11 @@ void omap_sram_idle(void)
> OMAP3430_GR_MOD,
> OMAP3_PRM_VOLTCTRL_OFFSET);
> }
> - /* Enable IO-PAD and IO-CHAIN wakeups */
> - prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
> - omap3_enable_io_chain();
> + if (core_next_state <= PWRDM_POWER_RET) {
> + /* Enable IO-PAD and IO-CHAIN wakeups */
> + prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
> + omap3_enable_io_chain();
> + }
> }
> omap3_intc_prepare_idle();
>
> @@ -561,15 +564,13 @@ void omap_sram_idle(void)
> }
>
> /* Disable IO-PAD and IO-CHAIN wakeup */
> - if (core_next_state < PWRDM_POWER_ON) {
> + if (core_next_state <= PWRDM_POWER_RET) {
> prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
> omap3_disable_io_chain();
> }
>
>
> pwrdm_post_transition();
> -
> - omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
> }
>
> int omap3_can_sleep(void)
> @@ -617,7 +618,6 @@ int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
> }
>
> if (sleep_switch) {
> - omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
> pwrdm_wait_transition(pwrdm);
> pwrdm_state_switch(pwrdm);
> }
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
