From: Tero Kristo <tero.kri...@nokia.com>

Previously omap_sram_idle() did not know about the difference between ON and
INACTIVE states, which complicated the state handling in these cases. Now,
the following changes are done in the idle logic:

- Check for IO-chain arming is changed to reflect desired state (RET)
- UART clocks will be disabled if we attempt to enter INACTIVE (this allows
  the state change to actually happen)

Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
---
 arch/arm/mach-omap2/pm34xx.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a5335f9..7cc3293 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -386,6 +386,7 @@ void omap_sram_idle(void)
        mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
        switch (mpu_next_state) {
        case PWRDM_POWER_ON:
+       case PWRDM_POWER_INACTIVE:
        case PWRDM_POWER_RET:
                /* No need to save context */
                save_state = 0;
@@ -452,9 +453,11 @@ void omap_sram_idle(void)
                                                OMAP3430_GR_MOD,
                                                OMAP3_PRM_VOLTCTRL_OFFSET);
                }
-               /* Enable IO-PAD and IO-CHAIN wakeups */
-               prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
-               omap3_enable_io_chain();
+               if (core_next_state <= PWRDM_POWER_RET) {
+                       /* Enable IO-PAD and IO-CHAIN wakeups */
+                       prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+                       omap3_enable_io_chain();
+               }
        }
        omap3_intc_prepare_idle();
 
@@ -555,15 +558,13 @@ void omap_sram_idle(void)
        }
 
        /* Disable IO-PAD and IO-CHAIN wakeup */
-       if (core_next_state < PWRDM_POWER_ON) {
+       if (core_next_state <= PWRDM_POWER_RET) {
                prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
                omap3_disable_io_chain();
        }
 
 
        pwrdm_post_transition();
-
-       omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
 int omap3_can_sleep(void)
@@ -611,7 +612,6 @@ int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
        }
 
        if (sleep_switch) {
-               omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
                pwrdm_wait_transition(pwrdm);
                pwrdm_state_switch(pwrdm);
        }
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to