Re: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support
* David Brownell [090208 12:25]: > On Wednesday 04 February 2009, Pillai, Manikandan wrote: > > I tested the patch on the OMAP 3 EVM. I still find that the > > hotplug feature does not work on the OMAP3 EVM. The issue is > > that if I read the gpio_cd, I am getting the correct value > > on the gpio pin(INSERT = 0, PLUGOUT = 1) but the interrupts > > are not generated. > > > > The mmc0 interrupts always shows 0. > > Are you getting any other IRQs through the twl4030 code? > > There's not a lot of debugging I can do with this, since > I don't have an EVM ... and since this seems to work OK > on other boards. (Testing on SDP being easiest, since > it's got a slot not tied down with MMC root.) > > This patch was basically sent as a seed, since nobody > else seemed to be filling in the missing MMC/SD pieces > on that board. I've pushed this, looks like the mux.[ch] changes had already been applied in another patch. Tony > - Dave > > > > r...@172.24.190.49:~# cat /proc/interrupts > > CPU0 > > 11: 0 INTC prcm > > 12: 4 INTC DMA > > 25: 0 INTC dispc > > 37: 1724 INTC gp timer > > 56: 267 INTC i2c_omap > > 57: 0 INTC i2c_omap > > 61: 0 INTC i2c_omap > > 72: 178 INTC serial idle, serial > > 73: 1 INTC serial idle > > 74: 1 INTC serial idle > > 83: 43 INTC mmc0 > > 92: 0 INTC musb_hdrc > > 93: 0 INTC musb_hdrc > > 335: 0 GPIO ads7846 > > 336: 3565 GPIO eth0 > > 369: 0 twl4030 twl4030_keypad > > 378: 0 twl4030 twl4030_usb > > 384: 0 twl4030 mmc0 > > Err: 0 > > > > Regards > > Mani > > > > > -----Original Message- > > > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > > > ow...@vger.kernel.org] On Behalf Of David Brownell > > > Sent: Thursday, February 05, 2009 4:53 AM > > > To: OMAP > > > Subject: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support > > > > > > Update OMAP3 EVM board support to support the MMC/SD switches, > > > when used with the twl4030 based power card. > > > > > > Also, less usefully, LEDB as a GPIO LED ... it's on the underside > > > of the board, so it's probably not very useful to most folk. The > > > LCD backlight is controlled by LEDA though; more useful, though > > > its PWM mode might not be practical on this board (I don't know > > > how that inductor will affect things). > > > > > > This is done from schematics, so it needs testing (and maybe some > > > bugfixes) from folk with an EVM board. > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support
On Wednesday 04 February 2009, Pillai, Manikandan wrote: > I tested the patch on the OMAP 3 EVM. I still find that the > hotplug feature does not work on the OMAP3 EVM. The issue is > that if I read the gpio_cd, I am getting the correct value > on the gpio pin(INSERT = 0, PLUGOUT = 1) but the interrupts > are not generated. > > The mmc0 interrupts always shows 0. Are you getting any other IRQs through the twl4030 code? There's not a lot of debugging I can do with this, since I don't have an EVM ... and since this seems to work OK on other boards. (Testing on SDP being easiest, since it's got a slot not tied down with MMC root.) This patch was basically sent as a seed, since nobody else seemed to be filling in the missing MMC/SD pieces on that board. - Dave > r...@172.24.190.49:~# cat /proc/interrupts > CPU0 > 11: 0 INTC prcm > 12: 4 INTC DMA > 25: 0 INTC dispc > 37: 1724 INTC gp timer > 56: 267 INTC i2c_omap > 57: 0 INTC i2c_omap > 61: 0 INTC i2c_omap > 72: 178 INTC serial idle, serial > 73: 1 INTC serial idle > 74: 1 INTC serial idle > 83: 43 INTC mmc0 > 92: 0 INTC musb_hdrc > 93: 0 INTC musb_hdrc > 335: 0 GPIO ads7846 > 336: 3565 GPIO eth0 > 369: 0 twl4030 twl4030_keypad > 378: 0 twl4030 twl4030_usb > 384: 0 twl4030 mmc0 > Err: 0 > > Regards > Mani > > > -Original Message- > > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > > ow...@vger.kernel.org] On Behalf Of David Brownell > > Sent: Thursday, February 05, 2009 4:53 AM > > To: OMAP > > Subject: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support > > > > Update OMAP3 EVM board support to support the MMC/SD switches, > > when used with the twl4030 based power card. > > > > Also, less usefully, LEDB as a GPIO LED ... it's on the underside > > of the board, so it's probably not very useful to most folk. The > > LCD backlight is controlled by LEDA though; more useful, though > > its PWM mode might not be practical on this board (I don't know > > how that inductor will affect things). > > > > This is done from schematics, so it needs testing (and maybe some > > bugfixes) from folk with an EVM board. > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support
Hi , I tested the patch on the OMAP 3 EVM. I still find that the hotplug feature does not work on the OMAP3 EVM. The issue is that if I read the gpio_cd, I am getting the correct value on the gpio pin(INSERT = 0, PLUGOUT = 1) but the interrupts are not generated. The mmc0 interrupts always shows 0. r...@172.24.190.49:~# cat /proc/interrupts CPU0 11: 0INTC prcm 12: 4INTC DMA 25: 0INTC dispc 37: 1724INTC gp timer 56:267INTC i2c_omap 57: 0INTC i2c_omap 61: 0INTC i2c_omap 72:178INTC serial idle, serial 73: 1INTC serial idle 74: 1INTC serial idle 83: 43INTC mmc0 92: 0INTC musb_hdrc 93: 0INTC musb_hdrc 335: 0GPIO ads7846 336: 3565GPIO eth0 369: 0 twl4030 twl4030_keypad 378: 0 twl4030 twl4030_usb 384: 0 twl4030 mmc0 Err: 0 Regards Mani > -Original Message- > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > ow...@vger.kernel.org] On Behalf Of David Brownell > Sent: Thursday, February 05, 2009 4:53 AM > To: OMAP > Subject: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support > > Update OMAP3 EVM board support to support the MMC/SD switches, > when used with the twl4030 based power card. > > Also, less usefully, LEDB as a GPIO LED ... it's on the underside > of the board, so it's probably not very useful to most folk. The > LCD backlight is controlled by LEDA though; more useful, though > its PWM mode might not be practical on this board (I don't know > how that inductor will affect things). > > This is done from schematics, so it needs testing (and maybe some > bugfixes) from folk with an EVM board. > > - Dave > > --- > arch/arm/mach-omap2/board-omap3evm.c | 69 ++-- > arch/arm/mach-omap2/mux.c |2 > arch/arm/plat-omap/include/mach/mux.h |1 > 3 files changed, 61 insertions(+), 11 deletions(-) > > --- a/arch/arm/mach-omap2/board-omap3evm.c > +++ b/arch/arm/mach-omap2/board-omap3evm.c > @@ -19,6 +19,7 @@ > #include > #include > #include > +#include > > #include > #include > @@ -31,6 +32,7 @@ > > #include > #include > +#include > #include > #include > #include > @@ -88,10 +90,66 @@ static struct omap_uart_config omap3_evm > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > > +static struct twl4030_hsmmc_info mmc[] = { > + { > + .mmc= 1, > + .wires = 4, > + .gpio_cd= -EINVAL, > + .gpio_wp= 63, > + }, > + {} /* Terminator */ > +}; > + > +static struct gpio_led gpio_leds[] = { > + { > + .name = "omap3evm::ledb", > + /* normally not visible (board underside) */ > + .default_trigger= "default-on", > + .gpio = -EINVAL, /* gets replaced */ > + .active_low = true, > + }, > +}; > + > +static struct gpio_led_platform_data gpio_led_info = { > + .leds = gpio_leds, > + .num_leds = ARRAY_SIZE(gpio_leds), > +}; > + > +static struct platform_device leds_gpio = { > + .name = "leds-gpio", > + .id = -1, > + .dev= { > + .platform_data = &gpio_led_info, > + }, > +}; > + > + > +static int omap3evm_twl_gpio_setup(struct device *dev, > + unsigned gpio, unsigned ngpio) > +{ > + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ > + omap_cfg_reg(L8_34XX_GPIO63); > + mmc[0].gpio_cd = gpio + 0; > + twl4030_mmc_init(mmc); > + > + /* Most GPIOs are for USB OTG. Some are mostly sent to > + * the P2 connector; notably LEDA for the LCD backlight. > + */ > + > + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ > + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; > + > + platform_device_register(&leds_gpio); > + > + return 0; > +} > + > static struct twl4030_gpio_platform_data omap3evm_gpio_data = { > .gpio_base = OMAP_MAX_GPIO_LINES, > .irq_base = TWL4030_GPIO_IRQ_BASE, > .irq_end= TWL4030_GPIO_IRQ_END, > + .use_leds = true, > + .setup = omap3evm_twl_gpio_setup, > }; > > static struct twl4030_usb_data omap3evm_usb_data = { > @@ -232,16 +290,6 @@ static struct platf
[patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support
Update OMAP3 EVM board support to support the MMC/SD switches, when used with the twl4030 based power card. Also, less usefully, LEDB as a GPIO LED ... it's on the underside of the board, so it's probably not very useful to most folk. The LCD backlight is controlled by LEDA though; more useful, though its PWM mode might not be practical on this board (I don't know how that inductor will affect things). This is done from schematics, so it needs testing (and maybe some bugfixes) from folk with an EVM board. - Dave --- arch/arm/mach-omap2/board-omap3evm.c | 69 ++-- arch/arm/mach-omap2/mux.c |2 arch/arm/plat-omap/include/mach/mux.h |1 3 files changed, 61 insertions(+), 11 deletions(-) --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,7 @@ #include #include +#include #include #include #include @@ -88,10 +90,66 @@ static struct omap_uart_config omap3_evm .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc= 1, + .wires = 4, + .gpio_cd= -EINVAL, + .gpio_wp= 63, + }, + {} /* Terminator */ +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "omap3evm::ledb", + /* normally not visible (board underside) */ + .default_trigger= "default-on", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev= { + .platform_data = &gpio_led_info, + }, +}; + + +static int omap3evm_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(L8_34XX_GPIO63); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* Most GPIOs are for USB OTG. Some are mostly sent to +* the P2 connector; notably LEDA for the LCD backlight. +*/ + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + platform_device_register(&leds_gpio); + + return 0; +} + static struct twl4030_gpio_platform_data omap3evm_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end= TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = omap3evm_twl_gpio_setup, }; static struct twl4030_usb_data omap3evm_usb_data = { @@ -232,16 +290,6 @@ static struct platform_device *omap3_evm &omap3evm_smc911x_device, }; -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc= 1, - .wires = 4, - .gpio_cd= -EINVAL, - .gpio_wp= -EINVAL, - }, - {} /* Terminator */ -}; - static void __init omap3_evm_init(void) { omap3_evm_i2c_init(); @@ -254,7 +302,6 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); - twl4030_mmc_init(mmc); usb_musb_init(); usb_ehci_init(); omap3evm_flash_init(); --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -463,6 +463,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -792,6 +792,7 @@ enum omap34xx_index { J25_34XX_GPIO170, AF26_34XX_GPIO0, AF22_34XX_GPIO9, + L8_34XX_GPIO63, AF6_34XX_GPIO140_UP, AE6_34XX_GPIO141, AF5_34XX_GPIO142, -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html