RE: Kernel panic on ldp board

2009-05-21 Thread Hald, Ulrik Bech
 -Original Message-
 From: Gary Thomas [mailto:g...@mlbassoc.com]
 Sent: Thursday, May 21, 2009 8:56 AM
 To: Hald, Ulrik Bech
 Cc: linux-omap@vger.kernel.org
 Subject: Re: Kernel panic on ldp board
 
 Hald, Ulrik Bech wrote:
  Hi,
 
  When booting on ldp (zoom1), I am seeing a kernel panic. I am using
 latest kernel built from L-O master at:
 
  OMAP: sDMA: Correct the the omap_request_dma_chain() signature
  0b2ce840c9fb58cf489bfdfc2d77f99a09a5dca3
 
  Any one having any idea as to why? Here's my boot trace
 
  ## Booting image at 8000 ...
 Image Name:   Linux-2.6.30-rc6-omap1-05706-g0b
 Image Type:   ARM Linux Kernel Image (uncompressed)
 Data Size:1843272 Bytes =  1.8 MB
 Load Address: 80008000
 Entry Point:  80008000
 Verifying Checksum ... OK
  OK
 
  Starting kernel ...
 
  Uncompressing
 Linux.
 ... don.
  5Linux version 2.6.30-rc6-omap1-05706-g0b2ce84 (a0389...@a0389051-
 ubuntu) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) 9
  CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f
  CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  Machine: OMAP LDP board
  Memory policy: ECC disabled, Data cache writeback
  7On node 0 totalpages: 65536
  7free_area_init_node: node 0, pgdat c038daf8, node_mem_map c03aa000
  7  Normal zone: 512 pages used for memmap
  7  Normal zone: 0 pages reserved
  7  Normal zone: 65024 pages, LIFO batch:15
  6OMAP3430 ES2.1
  6SRAM: Mapped pa 0x4020 to va 0xd700 size: 0x10
  Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
 65024
  5Kernel command line: console=ttyS2,115200n8 noinitrd mem=256M
 root=/dev/nfs rw
 nfsroot=128.247.85.232:/home/a0389051/omap3430/filesystemp
  6NR_IRQS:402
  6Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz
  6GPMC revision 5.0
  6IRQ: Found an INTC at 0xd820 (revision 4.0) with 96 interrupts
  6Total of 96 interrupts on 1 active controller
  6OMAP34xx GPIO hardware version 2.5
  PID hash table entries: 1024 (order: 10, 4096 bytes)
  6OMAP clockevent source: GPTIMER1 at 32768 Hz
  Console: colour dummy device 80x30
  6Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  6Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  6Memory: 256MB = 256MB total
  5Memory: 255872KB available (3176K code, 292K data, 132K init, 0K
 highmem)
  1Unhandled fault: external abort on non-linefetch (0x1008) at
 0xcf8c
  Internal error: : 1008 [#1]
  Modules linked in:
  CPU: 0Not tainted  (2.6.30-rc6-omap1-05706-g0b2ce84 #1)
  PC is at cache_alloc_refill+0x3f4/0x4f4
  LR is at 0x0
  pc : [c00929e0]lr : []psr: 8153
  sp : c035ff28  ip : 0002  fp : 80d0
  r10: 00d0  r9 : 0010  r8 : c037612c
  r7 : c0023808  r6 :   r5 : cf80  r4 : cf80
  r3 : 0028  r2 :   r1 : c059a020  r0 : c059a000
  Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387f  Table: 80004019  DAC: 0017
  Process swapper (pid: 0, stack limit = 0xc035e2e0)
  Stack: (0xc035ff28 to 0xc036)
  ff20:   c037612c 0020 c00238a4 6153 c0376110
 c037612c
  ff40: 80d0 0020 411fc082 0008 c0300876 c0092c10 
 c0376110
  ff60: 0020 00042000 0020 c00937f4  c03b1540 fa25
 0002
  ff80: c038e378 c0022e6b c0361ca0  c0023808 c0376184 c0376110
 c0376184
  ffa0: 411fc082 001f  c00129c4  c0376148 
 0040
  ffc0: c0022eec c038e240 c0022ee8 c0361ca0 8002106c c0008a84 c00084e8
 
  ffe0:  c0022eec  10c5387d c038e324 80008034 
 
  [c00929e0] (cache_alloc_refill+0x3f4/0x4f4) from [c0092c10]
 (kmem_cache_alloc+0x5c/0x94)
  [c0092c10] (kmem_cache_alloc+0x5c/0x94) from [c00937f4]
 (kmem_cache_create+0x1ec/0x438)
  [c00937f4] (kmem_cache_create+0x1ec/0x438) from [c00129c4]
 (kmem_cache_init+0x14c/0x310)
  [c00129c4] (kmem_cache_init+0x14c/0x310) from [c0008a84]
 (start_kernel+0x1d0/0x284)
  [c0008a84] (start_kernel+0x1d0/0x284) from [80008034] (0x80008034)
  Code: e1a06003 e1a05004 ea09 e598203c (e594100c)
  4---[ end trace 1b75b31a2719ed1c ]---
  0Kernel panic - not syncing: Attempted to kill the idle task!
 
 Incorrect command line - the LDP1 only has 128M
 
 One has to be careful when using the instructions from the Wiki
 
 https://omapzoom.org/gf/project/omapandroid/wiki/?pagename=Installing+the+
 System
 These have been tailored to the Zoom2 and are only close for Zoom1
 
 --
 
 Gary Thomas |  Consulting for the
 MLB Associates  |Embedded world
 

I tried with mem=128 also, and there it just hangs when Calibrating delay 
loop Any idea what that problem could

Re: Kernel panic on ldp board

2009-05-21 Thread Kevin Hilman
Hald, Ulrik Bech u...@ti.com writes:

 -Original Message-
 From: Gary Thomas [mailto:g...@mlbassoc.com]
 Sent: Thursday, May 21, 2009 8:56 AM
 To: Hald, Ulrik Bech
 Cc: linux-omap@vger.kernel.org
 Subject: Re: Kernel panic on ldp board
 
 Hald, Ulrik Bech wrote:
  Hi,
 
  When booting on ldp (zoom1), I am seeing a kernel panic. I am using
 latest kernel built from L-O master at:
 
  OMAP: sDMA: Correct the the omap_request_dma_chain() signature
  0b2ce840c9fb58cf489bfdfc2d77f99a09a5dca3
 
  Any one having any idea as to why? Here's my boot trace
 
  ## Booting image at 8000 ...
 Image Name:   Linux-2.6.30-rc6-omap1-05706-g0b
 Image Type:   ARM Linux Kernel Image (uncompressed)
 Data Size:1843272 Bytes =  1.8 MB
 Load Address: 80008000
 Entry Point:  80008000
 Verifying Checksum ... OK
  OK
 
  Starting kernel ...
 
  Uncompressing
 Linux.
 ... don.
  5Linux version 2.6.30-rc6-omap1-05706-g0b2ce84 (a0389...@a0389051-
 ubuntu) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) 9
  CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f
  CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  Machine: OMAP LDP board
  Memory policy: ECC disabled, Data cache writeback
  7On node 0 totalpages: 65536
  7free_area_init_node: node 0, pgdat c038daf8, node_mem_map c03aa000
  7  Normal zone: 512 pages used for memmap
  7  Normal zone: 0 pages reserved
  7  Normal zone: 65024 pages, LIFO batch:15
  6OMAP3430 ES2.1
  6SRAM: Mapped pa 0x4020 to va 0xd700 size: 0x10
  Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
 65024
  5Kernel command line: console=ttyS2,115200n8 noinitrd mem=256M
 root=/dev/nfs rw
 nfsroot=128.247.85.232:/home/a0389051/omap3430/filesystemp
  6NR_IRQS:402
  6Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz
  6GPMC revision 5.0
  6IRQ: Found an INTC at 0xd820 (revision 4.0) with 96 interrupts
  6Total of 96 interrupts on 1 active controller
  6OMAP34xx GPIO hardware version 2.5
  PID hash table entries: 1024 (order: 10, 4096 bytes)
  6OMAP clockevent source: GPTIMER1 at 32768 Hz
  Console: colour dummy device 80x30
  6Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  6Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  6Memory: 256MB = 256MB total
  5Memory: 255872KB available (3176K code, 292K data, 132K init, 0K
 highmem)
  1Unhandled fault: external abort on non-linefetch (0x1008) at
 0xcf8c
  Internal error: : 1008 [#1]
  Modules linked in:
  CPU: 0Not tainted  (2.6.30-rc6-omap1-05706-g0b2ce84 #1)
  PC is at cache_alloc_refill+0x3f4/0x4f4
  LR is at 0x0
  pc : [c00929e0]lr : []psr: 8153
  sp : c035ff28  ip : 0002  fp : 80d0
  r10: 00d0  r9 : 0010  r8 : c037612c
  r7 : c0023808  r6 :   r5 : cf80  r4 : cf80
  r3 : 0028  r2 :   r1 : c059a020  r0 : c059a000
  Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387f  Table: 80004019  DAC: 0017
  Process swapper (pid: 0, stack limit = 0xc035e2e0)
  Stack: (0xc035ff28 to 0xc036)
  ff20:   c037612c 0020 c00238a4 6153 c0376110
 c037612c
  ff40: 80d0 0020 411fc082 0008 c0300876 c0092c10 
 c0376110
  ff60: 0020 00042000 0020 c00937f4  c03b1540 fa25
 0002
  ff80: c038e378 c0022e6b c0361ca0  c0023808 c0376184 c0376110
 c0376184
  ffa0: 411fc082 001f  c00129c4  c0376148 
 0040
  ffc0: c0022eec c038e240 c0022ee8 c0361ca0 8002106c c0008a84 c00084e8
 
  ffe0:  c0022eec  10c5387d c038e324 80008034 
 
  [c00929e0] (cache_alloc_refill+0x3f4/0x4f4) from [c0092c10]
 (kmem_cache_alloc+0x5c/0x94)
  [c0092c10] (kmem_cache_alloc+0x5c/0x94) from [c00937f4]
 (kmem_cache_create+0x1ec/0x438)
  [c00937f4] (kmem_cache_create+0x1ec/0x438) from [c00129c4]
 (kmem_cache_init+0x14c/0x310)
  [c00129c4] (kmem_cache_init+0x14c/0x310) from [c0008a84]
 (start_kernel+0x1d0/0x284)
  [c0008a84] (start_kernel+0x1d0/0x284) from [80008034] (0x80008034)
  Code: e1a06003 e1a05004 ea09 e598203c (e594100c)
  4---[ end trace 1b75b31a2719ed1c ]---
  0Kernel panic - not syncing: Attempted to kill the idle task!
 
 Incorrect command line - the LDP1 only has 128M
 
 One has to be careful when using the instructions from the Wiki
 
 https://omapzoom.org/gf/project/omapandroid/wiki/?pagename=Installing+the+
 System
 These have been tailored to the Zoom2 and are only close for Zoom1
 
 --
 
 Gary Thomas |  Consulting for the
 MLB Associates  |Embedded world
 

 I tried with mem=128 also, and there it just hangs when Calibrating delay 
 loop

Kernel panic on ldp board

2009-05-19 Thread Hald, Ulrik Bech
Hi,

When booting on ldp (zoom1), I am seeing a kernel panic. I am using latest 
kernel built from L-O master at:

OMAP: sDMA: Correct the the omap_request_dma_chain() signature
0b2ce840c9fb58cf489bfdfc2d77f99a09a5dca3

Any one having any idea as to why? Here's my boot trace

## Booting image at 8000 ...
   Image Name:   Linux-2.6.30-rc6-omap1-05706-g0b
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:1843272 Bytes =  1.8 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing 
Linux
 don.
5Linux version 2.6.30-rc6-omap1-05706-g0b2ce84 (a0389...@a0389051-ubuntu) 
(gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) 9
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP LDP board
Memory policy: ECC disabled, Data cache writeback
7On node 0 totalpages: 65536
7free_area_init_node: node 0, pgdat c038daf8, node_mem_map c03aa000
7  Normal zone: 512 pages used for memmap
7  Normal zone: 0 pages reserved
7  Normal zone: 65024 pages, LIFO batch:15
6OMAP3430 ES2.1
6SRAM: Mapped pa 0x4020 to va 0xd700 size: 0x10
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
5Kernel command line: console=ttyS2,115200n8 noinitrd mem=256M root=/dev/nfs 
rw nfsroot=128.247.85.232:/home/a0389051/omap3430/filesystemp
6NR_IRQS:402
6Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz
6GPMC revision 5.0
6IRQ: Found an INTC at 0xd820 (revision 4.0) with 96 interrupts
6Total of 96 interrupts on 1 active controller
6OMAP34xx GPIO hardware version 2.5
PID hash table entries: 1024 (order: 10, 4096 bytes)
6OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
6Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
6Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
6Memory: 256MB = 256MB total
5Memory: 255872KB available (3176K code, 292K data, 132K init, 0K highmem)
1Unhandled fault: external abort on non-linefetch (0x1008) at 0xcf8c
Internal error: : 1008 [#1]
Modules linked in:
CPU: 0Not tainted  (2.6.30-rc6-omap1-05706-g0b2ce84 #1)
PC is at cache_alloc_refill+0x3f4/0x4f4
LR is at 0x0
pc : [c00929e0]lr : []psr: 8153
sp : c035ff28  ip : 0002  fp : 80d0
r10: 00d0  r9 : 0010  r8 : c037612c
r7 : c0023808  r6 :   r5 : cf80  r4 : cf80
r3 : 0028  r2 :   r1 : c059a020  r0 : c059a000
Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387f  Table: 80004019  DAC: 0017
Process swapper (pid: 0, stack limit = 0xc035e2e0)
Stack: (0xc035ff28 to 0xc036)
ff20:   c037612c 0020 c00238a4 6153 c0376110 c037612c 
ff40: 80d0 0020 411fc082 0008 c0300876 c0092c10  c0376110 
ff60: 0020 00042000 0020 c00937f4  c03b1540 fa25 0002 
ff80: c038e378 c0022e6b c0361ca0  c0023808 c0376184 c0376110 c0376184 
ffa0: 411fc082 001f  c00129c4  c0376148  0040 
ffc0: c0022eec c038e240 c0022ee8 c0361ca0 8002106c c0008a84 c00084e8  
ffe0:  c0022eec  10c5387d c038e324 80008034   
[c00929e0] (cache_alloc_refill+0x3f4/0x4f4) from [c0092c10] 
(kmem_cache_alloc+0x5c/0x94)
[c0092c10] (kmem_cache_alloc+0x5c/0x94) from [c00937f4] 
(kmem_cache_create+0x1ec/0x438)
[c00937f4] (kmem_cache_create+0x1ec/0x438) from [c00129c4] 
(kmem_cache_init+0x14c/0x310)
[c00129c4] (kmem_cache_init+0x14c/0x310) from [c0008a84] 
(start_kernel+0x1d0/0x284)
[c0008a84] (start_kernel+0x1d0/0x284) from [80008034] (0x80008034)
Code: e1a06003 e1a05004 ea09 e598203c (e594100c) 
4---[ end trace 1b75b31a2719ed1c ]---
0Kernel panic - not syncing: Attempted to kill the idle task!


Best Regards
Ulrik Bech Hald

Wireless Terminals Software Development
Texas Instruments Inc.
Desk Phone: (1) 214-567-6943

--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html