sense:
Encl PD 20 Path 5d81f060d4822a00, CDB: 12 01 80 00 ff 00, Sense: 5/24/00
12/07/15 13:54:54: Raw Sense for PD 20: 70 00 05 00 00 00 00 0a 00 00 00
00 24 00 00 00 00 00
12/12/15 5:00:01: prDiskStart: starting Patrol Read on PD=00
12/12/15 5:00:01: prDiskStart: starting Patrol Read on PD=01
12/12/15 5:00:01: prDiskStart: starting Patrol Read on PD=02
12/12/15 5:00:01: prDiskStart: starting Patrol Read on PD=03
12/12/15 5:00:01: prDiskStart: starting Patrol Read on PD=04
12/12/15 5:00:01: EVT#04158-12/12/15 5:00:01: 39=Patrol Read started
12/12/15 8:09:00: prCallback: PR completed for pd=04
12/12/15 8:11:33: prCallback: PR completed for pd=03
12/12/15 8:15:22: prCallback: PR completed for pd=00
12/14/15 0:06:14: prCallback: PR completed for pd=01
12/14/15 0:11:39: prCallback: PR completed for pd=02
12/14/15 0:11:39: PR cycle complete
12/14/15 0:11:39: EVT#04159-12/14/15 0:11:39: 35=Patrol Read complete
12/14/15 0:11:39: Next PR scheduled to start at 12/19/15 5:00:01
On /var/log/kern.log I get :
Dec 16 10:53:51 theta1 kernel: [769640.032639] sdc: detected capacity change
from 500103667712 to 0 Dec 16 11:18:17 theta1 kernel: [771106.162471] scsi
1:0:2:0:
Sequential-Access HP Ultrium 5-SCSI Z5AD PQ: 0 ANSI: 6
Dec 16 11:18:17 theta1 kernel: [771106.162483] scsi 1:0:2:0: SSP:
handle(0x0009), sas_addr(0x500110a0014c8dd0), phy(3),
device_name(0xa0100150d28d4c01)
Dec 16 11:18:17 theta1 kernel: [771106.162488] scsi 1:0:2:0: SSP:
enclosure_logical_id(0x5141877047b73100), slot(4) Dec 16 11:18:17 theta1
kernel: [771106.162494] scsi 1:0:2:0:
qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Dec 16
11:18:17 theta1 kernel: [771106.164855] scsi 1:0:2:0: TLR Enabled Dec 16
11:18:17 theta1 kernel: [771106.167348] st 1:0:2:0: Attached scsi tape st0 Dec
16 11:18:17 theta1 kernel: [771106.167354] st 1:0:2:0: st0: try direct i/o: yes
(alignment 4 B) Dec 16 11:18:17 theta1 kernel: [771106.167585] st 1:0:2:0:
Attached scsi generic sg5 type 1 Dec 16 11:29:28 theta1 kernel: [771777.767773]
st0: Block limits 1 -
16777215 bytes.
Dec 16 11:29:52 theta1 kernel: [771801.073028] scsi 0:0:0:0:
Direct-Access ATA ST91000640NS AA0D PQ: 0 ANSI: 5
Dec 16 11:29:52 theta1 kernel: [771801.075372] scsi 0:0:1:0:
Direct-Access ATA ST91000640NS AA09 PQ: 0 ANSI: 5
Dec 16 11:29:52 theta1 kernel: [771801.077619] scsi 0:0:2:0:
Direct-Access ATA ST91000640NS AA0D PQ: 0 ANSI: 5
Dec 16 11:29:52 theta1 kernel: [771801.079936] scsi 0:0:3:0:
Direct-Access ATA ST91000640NS AA63 PQ: 0 ANSI: 5
Dec 16 11:29:52 theta1 kernel: [771801.082074] scsi 0:0:4:0:
Direct-Access ATA ST91000640NS AA63 PQ: 0 ANSI: 5
Dec 16 11:48:24 theta1 kernel: [772913.557061] failure at
/build/linux-Tvajqd/linux-3.2.68/drivers/scsi/mpt2sas/mpt2sas_ctl.c:770/_ctl_do_mpt_command()!
Dec 16 11:48:24 theta1 kernel: [772913.580024] failure at
/build/linux-Tvajqd/linux-3.2.68/drivers/scsi/mpt2sas/mpt2sas_ctl.c:770/_ctl_do_mpt_command()!
Dec 16 11:48:24 theta1 kernel: [772913.601978] failure at
/build/linux-Tvajqd/linux-3.2.68/drivers/scsi/mpt2sas/mpt2sas_ctl.c:770/_ctl_do_mpt_command()!
Dec 16 11:48:24 theta1 kernel: [772913.620034] failure at
/build/linux-Tvajqd/linux-3.2.68/drivers/scsi/mpt2sas/mpt2sas_ctl.c:770/_ctl_do_mpt_command()!
The ST91000640NS are the drives in RAIDs (+ a spare). This lines have appaired
when I have done a "echo "- - -" >/sys/class/scsi_host/host0/scan".
Failure in mpt2sas has appeared after the problem begins mpt2sas is the driver
of the SAS controller for the LTO drive, not the disks.
Thanks,
--
Message: 2
Date: Wed, 16 Dec 2015 13:03:14 +0000
From: lejeczek
Subject: [Linux-PowerEdge] racadm - idracadm: error while loading
shared libraries...
To: "linux-poweredge@dell.com"
Message-ID:
Content-Type: text/plain; charset=utf-8; format=flowed
$ racadm -h
/opt/dell/srvadmin/bin/idracadm: error while loading shared
libraries: libargtable2.so.0: cannot open shared object
file: No such file or directory
is Dell forgetting to put it into libraries paths config?
(with help of scriptlets)
or should be pulling automatically during install - argtable
- which is already in epel repo!
regards
--
Message: 3
Date: Wed, 16 Dec 2015 10:15:50 -0500
From: Rich Sudlow
Subject: [Linux-PowerEdge] dsu works in rhels6 but not rhels7
To: "linux-poweredge@dell.com"
Message-ID:
Content-Type: text/plain; charset=utf-8; format=flowed
I recently ran into a bios update which wouldn't install under
rhels7.2 but on a hunch I installed rhels6.7 and tried again and it worked. The
machine was a R510 and bios went from
1.6.3 to 1.12.0 - since I'm relatively new to using dsu I was wondering if
there might be any known problems using rhels7.2?
Thanks,
Rich
--
Rich Sudlow
University of Notre Dame
Center for Research Computing - Union Station
506 W. South St
South Bend, In 46601
(574) 631-7258 (office)
(574) 807-1046 (cell)
---
