This patch set is based on the renesas-drivers.git / renesas-drivers-2016-02-16-v4.5-rc4 tag (commit id = a633abe6e6393c60417bd8cb0cf82f3297740198), and the following patches:
[ renesas_usbhs driver ] http://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/commit/?h=testing/next&id=cff0fef33d77bd7e98463029e5d0a4191d9bbb95 [ generic phy driver for R-Car H3 ] http://thread.gmane.org/gmane.linux.kernel/2120685 This patch set contains patches that are related to generic phy driver. As I wrote a comment in patch 7, to handle VBUS on/off for USB2.0 host channel 0, I use a regulator driver instead of extcon/max3355 driver. This is a reason that I marked this patch set is a RFC because I'm not sure that this way is acceptable or not. Also patch 5 should resolve checkpatch.pl warnings, and patch 6 should have dmas property to use USB-DMAC later. Changes from v1: - Remove PFC for usb2.0 host patch because it contains the renesas-drivers. - Change the patch order of the phy driver. (clean up code is in first.) - Change the property of "phy-supply" to "vbus-supply". Yoshihiro Shimoda (9): phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off phy: rcar-gen3-usb2: add extcon support arm64: dts: r8a7795: add usb2_phy device nodes arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes arm64: dts: r8a7795: add HS-USB device node arm64: dts: salvator-x: enable usb2_phy arm64: dts: salvator-x: enable USB 2.0 Host channels arm64: dts: salvator-x: enable HS-USB .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 + arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 73 +++++++++++++- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 107 +++++++++++++++++++++ drivers/phy/Kconfig | 1 + drivers/phy/phy-rcar-gen3-usb2.c | 87 +++++++++++++---- 5 files changed, 250 insertions(+), 20 deletions(-) -- 1.9.1
