Re: [PATCH] gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
On úterý 9. ledna 2018 19:08:21 CET, Geert Uytterhoeven wrote: Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper __gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven --- The bad gpio commit is in v4.15-rc1 and later. The i2c commit exposing this is not yet upstream, but in i2c/for-next. --- drivers/gpio/gpiolib.c | 26 ++ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 358bce6e798b476c..7761d632a5b0dd20 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2927,6 +2927,18 @@ void gpiod_set_raw_value(struct gpio_desc *desc, int value) } EXPORT_SYMBOL_GPL(gpiod_set_raw_value); +static void __gpiod_set_value_nocheck(struct gpio_desc *desc, int value) +{ + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + gpio_set_open_drain_value_commit(desc, value); + else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + gpio_set_open_source_value_commit(desc, value); + else + gpiod_set_raw_value_commit(desc, value); +} + /** * gpiod_set_value() - assign a gpio's value * @desc: gpio whose value will be assigned @@ -2941,16 +2953,8 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_value); void gpiod_set_value(struct gpio_desc *desc, int value) { VALIDATE_DESC_VOID(desc); - /* Should be using gpiod_set_value_cansleep() */ WARN_ON(desc->gdev->chip->can_sleep); - if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) - value = !value; - if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) - gpio_set_open_drain_value_commit(desc, value); - else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) - gpio_set_open_source_value_commit(desc, value); - else - gpiod_set_raw_value_commit(desc, value); + __gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value); @@ -3277,9 +3281,7 @@ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) { might_sleep_if(extra_checks); VALIDATE_DESC_VOID(desc); - if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) - value = !value; - gpiod_set_raw_value_commit(desc, value); + __gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep); I realize that I'm late to the party (a merge request has been sent), but I can confirm that I tested that this still works for a bitbang I2C over GPIO pins connected to MAX14830 managed by max310x. Tested-By: Jan Kundrát Cheers, Jan
Re: [PATCH] gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
Hi Linus, On Wed, Jan 10, 2018 at 2:17 PM, Linus Walleij wrote: > On Tue, Jan 9, 2018 at 7:08 PM, Geert Uytterhoeven > wrote: > >> Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow >> can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on >> r8a7740/armadillo fails with: >> >> rtc-s35390a 0-0030: error resetting chip >> rtc-s35390a: probe of 0-0030 failed with error -5 >> >> More debug code reveals: >> >> i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 >> i2c i2c-0: NAK from device addr 0x30 msg #0 >> s35390a_get_reg: ret = -6 >> >> Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to >> actually be raw") moved open drain/source handling from >> gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take >> into account that gpiod_set_value_cansleep() also needs this handling. >> The i2c protocol mandates that i2c signals are open drain, hence i2c >> communication fails. >> >> Fix this by adding the missing handling to gpiod_set_value_cansleep(), >> using a new common helper __gpiod_set_value_nocheck(). >> >> Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to >> actually be raw") >> Signed-off-by: Geert Uytterhoeven >> --- >> The bad gpio commit is in v4.15-rc1 and later. >> The i2c commit exposing this is not yet upstream, but in i2c/for-next. > > Whoops! > > It appears Meltdown and Spectre saves my ass because now I have > time to get this upstream before v4.15... > > Applied for fixes with the following tweaks: I removed the __prefix (I don't > like them) and added kerneldoc. Looks good to me (also in git). Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH] gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
On Tue, Jan 9, 2018 at 7:08 PM, Geert Uytterhoeven wrote: > Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow > can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on > r8a7740/armadillo fails with: > > rtc-s35390a 0-0030: error resetting chip > rtc-s35390a: probe of 0-0030 failed with error -5 > > More debug code reveals: > > i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 > i2c i2c-0: NAK from device addr 0x30 msg #0 > s35390a_get_reg: ret = -6 > > Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to > actually be raw") moved open drain/source handling from > gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take > into account that gpiod_set_value_cansleep() also needs this handling. > The i2c protocol mandates that i2c signals are open drain, hence i2c > communication fails. > > Fix this by adding the missing handling to gpiod_set_value_cansleep(), > using a new common helper __gpiod_set_value_nocheck(). > > Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to > actually be raw") > Signed-off-by: Geert Uytterhoeven > --- > The bad gpio commit is in v4.15-rc1 and later. > The i2c commit exposing this is not yet upstream, but in i2c/for-next. Whoops! It appears Meltdown and Spectre saves my ass because now I have time to get this upstream before v4.15... Applied for fixes with the following tweaks: I removed the __prefix (I don't like them) and added kerneldoc. diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 1693bb9ab72c..14532d9576e4 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2892,7 +2892,16 @@ void gpiod_set_raw_value(struct gpio_desc *desc, int value) } EXPORT_SYMBOL_GPL(gpiod_set_raw_value); -static void __gpiod_set_value_nocheck(struct gpio_desc *desc, int value) +/** + * gpiod_set_value_nocheck() - set a GPIO line value without checking + * @desc: the descriptor to set the value on + * @value: value to set + * + * This sets the value of a GPIO line backing a descriptor, applying + * different semantic quirks like active low and open drain/source + * handling. + */ +static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value) { if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; @@ -2919,7 +2928,7 @@ void gpiod_set_value(struct gpio_desc *desc, int value) { VALIDATE_DESC_VOID(desc); WARN_ON(desc->gdev->chip->can_sleep); - __gpiod_set_value_nocheck(desc, value); + gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value); @@ -3247,7 +3256,7 @@ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) { might_sleep_if(extra_checks); VALIDATE_DESC_VOID(desc); - __gpiod_set_value_nocheck(desc, value); + gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep); Yours, Linus Walleij
[PATCH] gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper __gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven --- The bad gpio commit is in v4.15-rc1 and later. The i2c commit exposing this is not yet upstream, but in i2c/for-next. --- drivers/gpio/gpiolib.c | 26 ++ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 358bce6e798b476c..7761d632a5b0dd20 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2927,6 +2927,18 @@ void gpiod_set_raw_value(struct gpio_desc *desc, int value) } EXPORT_SYMBOL_GPL(gpiod_set_raw_value); +static void __gpiod_set_value_nocheck(struct gpio_desc *desc, int value) +{ + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) + value = !value; + if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + gpio_set_open_drain_value_commit(desc, value); + else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + gpio_set_open_source_value_commit(desc, value); + else + gpiod_set_raw_value_commit(desc, value); +} + /** * gpiod_set_value() - assign a gpio's value * @desc: gpio whose value will be assigned @@ -2941,16 +2953,8 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_value); void gpiod_set_value(struct gpio_desc *desc, int value) { VALIDATE_DESC_VOID(desc); - /* Should be using gpiod_set_value_cansleep() */ WARN_ON(desc->gdev->chip->can_sleep); - if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) - value = !value; - if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) - gpio_set_open_drain_value_commit(desc, value); - else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) - gpio_set_open_source_value_commit(desc, value); - else - gpiod_set_raw_value_commit(desc, value); + __gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value); @@ -3277,9 +3281,7 @@ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) { might_sleep_if(extra_checks); VALIDATE_DESC_VOID(desc); - if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) - value = !value; - gpiod_set_raw_value_commit(desc, value); + __gpiod_set_value_nocheck(desc, value); } EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep); -- 2.7.4