This SD/eMMC controller is used for UniPhier SoC family.
Signed-off-by: Masahiro Yamada
Reviewed-by: Rob Herring
---
Changes in v2:
- Rename compatible "socionext,uniphier-sd-v3.1b"
to "socionext,uniphier-sd-v3.1.1"
.../devicetree/bindings/mmc/uniphier-sd.txt| 55 ++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/uniphier-sd.txt
diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
new file mode 100644
index 000..e1d6587
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt
@@ -0,0 +1,55 @@
+UniPhier SD/eMMC controller
+
+Required properties:
+- compatible: should be one of the following:
+"socionext,uniphier-sd-v2.91" - IP version 2.91
+"socionext,uniphier-sd-v3.1" - IP version 3.1
+"socionext,uniphier-sd-v3.1.1" - IP version 3.1.1
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: a single clock specifier of the controller clock.
+- reset-names: should contain the following:
+"host" - mandatory for all versions
+"bridge" - should exist only for "socionext,uniphier-sd-v2.91"
+"hw" - should exist if eMMC hw reset line is available
+- resets: a list of reset specifiers, corresponding to the reset-names
+
+Optional properties:
+- pinctrl-names: if present, should contain the following:
+"default" - should exist for all instances
+"uhs" - should exist for SD instance with UHS support
+- pinctrl-0: pin control state for the default mode
+- pinctrl-1: pin control state for the UHS mode
+- dma-names: should be "rx-tx" if present.
+ This property can exist only for "socionext,uniphier-sd-v2.91".
+- dmas: a single DMA channel specifier
+ This property can exist only for "socionext,uniphier-sd-v2.91".
+- bus-width: see mmc.txt
+- cap-sd-highspeed: see mmc.txt
+- cap-mmc-highspeed: see mmc.txt
+- sd-uhs-sdr12: see mmc.txt
+- sd-uhs-sdr25: see mmc.txt
+- sd-uhs-sdr50: see mmc.txt
+- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt
+- non-removable: see mmc.txt
+
+Example:
+
+ sd: sdhc@5a40 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ reg = <0x5a40 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
--
2.7.4
