Re: [PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-09-02 Thread Simon Horman 
On Thu, Sep 01, 2016 at 09:25:08PM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Thu, Sep 1, 2016 at 4:17 PM, Simon Horman  wrote:
> >> > [01/12] dt: arm: shmobile: add H3ULCB board DT bindings
> >
> > I have queued up the above patch after renaming it
> > arm64: dts: h3ulcb: enable USB2.0 Host channel 1
> >
> >> > [02/12] arm64: dts: h3ulcb: initial device tree
> >> > [03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
> >> > [04/12] arm64: dts: h3ulcb: enable EthernetAVB
> >> > [05/12] arm64: dts: h3ulcb: enable GPIO leds
> >> > [06/12] arm64: dts: h3ulcb: enable SDHI0
> >> > [07/12] arm64: dts: h3ulcb: enable I2C2
> >> > [08/12] arm64: dts: h3ulcb: enable EXTALR clk
> >> > [09/12] arm64: dts: h3ulcb: enable WDT
> >> > [10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
> >> > [11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1
> >>
> >> I went through all of the above...
> >
> > I have also queued up 02,03,04,07,08,09,11/12.
> 
> Any specific reason you skipped 10/12? I'm afraid it's a prerequisite for
> 11/12.

Thanks for pointing that out, it is an oversight.
I have queued up 10/12 and plan to push a bit later today.

Re: [PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-09-01 Thread Simon Horman 
On Thu, Sep 01, 2016 at 04:17:12PM +0200, Simon Horman wrote:
> On Thu, Sep 01, 2016 at 10:39:04AM +0200, Geert Uytterhoeven wrote:
> > Hi Vladimir,
> > 
> > On Wed, Aug 31, 2016 at 12:01 PM, Vladimir Barinov
> >  wrote:
> > > This adds the folowing:
> > > - R8A7795 SoC based H3ULCB low cost board device tree
> > > - Document DT bindings
> > 
> > Thanks for your split series!
> 
> Likewise. And thanks Geert for your review.
> 
> 
> > > Vladimir Barinov (12):
> > > [01/12] dt: arm: shmobile: add H3ULCB board DT bindings
> 
> I have queued up the above patch after renaming it
> arm64: dts: h3ulcb: enable USB2.0 Host channel 1

Cut an paste error (that is the parent commit in my tree).
I meant to say:

  arm64: dts: h3ulcb: add H3ULCB board DT bindings

> > > [02/12] arm64: dts: h3ulcb: initial device tree
> > > [03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
> > > [04/12] arm64: dts: h3ulcb: enable EthernetAVB
> > > [05/12] arm64: dts: h3ulcb: enable GPIO leds
> > > [06/12] arm64: dts: h3ulcb: enable SDHI0
> > > [07/12] arm64: dts: h3ulcb: enable I2C2
> > > [08/12] arm64: dts: h3ulcb: enable EXTALR clk
> > > [09/12] arm64: dts: h3ulcb: enable WDT
> > > [10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
> > > [11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1
> > 
> > I went through all of the above...
> 
> I have also queued up 02,03,04,07,08,09,11/12.
> 
> > > [12/12] arm64: dts: h3ulcb: Sound SSI support
> > 
> > ... but I'm leaving this one for Morimoto-san.
>

Re: [PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-09-01 Thread Simon Horman 
On Thu, Sep 01, 2016 at 10:39:04AM +0200, Geert Uytterhoeven wrote:
> Hi Vladimir,
> 
> On Wed, Aug 31, 2016 at 12:01 PM, Vladimir Barinov
>  wrote:
> > This adds the folowing:
> > - R8A7795 SoC based H3ULCB low cost board device tree
> > - Document DT bindings
> 
> Thanks for your split series!

Likewise. And thanks Geert for your review.


> > Vladimir Barinov (12):
> > [01/12] dt: arm: shmobile: add H3ULCB board DT bindings

I have queued up the above patch after renaming it
arm64: dts: h3ulcb: enable USB2.0 Host channel 1

> > [02/12] arm64: dts: h3ulcb: initial device tree
> > [03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
> > [04/12] arm64: dts: h3ulcb: enable EthernetAVB
> > [05/12] arm64: dts: h3ulcb: enable GPIO leds
> > [06/12] arm64: dts: h3ulcb: enable SDHI0
> > [07/12] arm64: dts: h3ulcb: enable I2C2
> > [08/12] arm64: dts: h3ulcb: enable EXTALR clk
> > [09/12] arm64: dts: h3ulcb: enable WDT
> > [10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
> > [11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1
> 
> I went through all of the above...

I have also queued up 02,03,04,07,08,09,11/12.

> > [12/12] arm64: dts: h3ulcb: Sound SSI support
> 
> ... but I'm leaving this one for Morimoto-san.

Re: [PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-09-01 Thread Vladimir Barinov 

Hi Geert,

Thank you for the review!
I will wait for Morimoto-san review and respin the patch series 
accordingly to your comments.


Regards,
Vladimir

On 01.09.2016 11:39, Geert Uytterhoeven wrote:

Hi Vladimir,

On Wed, Aug 31, 2016 at 12:01 PM, Vladimir Barinov
 wrote:

This adds the folowing:
- R8A7795 SoC based H3ULCB low cost board device tree
- Document DT bindings

Thanks for your split series!


Vladimir Barinov (12):
[01/12] dt: arm: shmobile: add H3ULCB board DT bindings
[02/12] arm64: dts: h3ulcb: initial device tree
[03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
[04/12] arm64: dts: h3ulcb: enable EthernetAVB
[05/12] arm64: dts: h3ulcb: enable GPIO leds
[06/12] arm64: dts: h3ulcb: enable SDHI0
[07/12] arm64: dts: h3ulcb: enable I2C2
[08/12] arm64: dts: h3ulcb: enable EXTALR clk
[09/12] arm64: dts: h3ulcb: enable WDT
[10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
[11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1

I went through all of the above...


[12/12] arm64: dts: h3ulcb: Sound SSI support

... but I'm leaving this one for Morimoto-san.

Gr{oetje,eeting}s,

 Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
 -- Linus Torvalds

Re: [PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-09-01 Thread Geert Uytterhoeven 
Hi Vladimir,

On Wed, Aug 31, 2016 at 12:01 PM, Vladimir Barinov
 wrote:
> This adds the folowing:
> - R8A7795 SoC based H3ULCB low cost board device tree
> - Document DT bindings

Thanks for your split series!

> Vladimir Barinov (12):
> [01/12] dt: arm: shmobile: add H3ULCB board DT bindings
> [02/12] arm64: dts: h3ulcb: initial device tree
> [03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
> [04/12] arm64: dts: h3ulcb: enable EthernetAVB
> [05/12] arm64: dts: h3ulcb: enable GPIO leds
> [06/12] arm64: dts: h3ulcb: enable SDHI0
> [07/12] arm64: dts: h3ulcb: enable I2C2
> [08/12] arm64: dts: h3ulcb: enable EXTALR clk
> [09/12] arm64: dts: h3ulcb: enable WDT
> [10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
> [11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1

I went through all of the above...

> [12/12] arm64: dts: h3ulcb: Sound SSI support

... but I'm leaving this one for Morimoto-san.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

[PATCH v3 0/12] arm64: renesas: add H3ULCB board

2016-08-31 Thread Vladimir Barinov 
Hello,

This adds the folowing:
- R8A7795 SoC based H3ULCB low cost board device tree
- Document DT bindings

Vladimir Barinov (12):
[01/12] dt: arm: shmobile: add H3ULCB board DT bindings
[02/12] arm64: dts: h3ulcb: initial device tree
[03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
[04/12] arm64: dts: h3ulcb: enable EthernetAVB
[05/12] arm64: dts: h3ulcb: enable GPIO leds
[06/12] arm64: dts: h3ulcb: enable SDHI0
[07/12] arm64: dts: h3ulcb: enable I2C2
[08/12] arm64: dts: h3ulcb: enable EXTALR clk
[09/12] arm64: dts: h3ulcb: enable WDT
[10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1
[11/12] arm64: dts: h3ulcb: enable USB2.0 Host channel 1
[12/12] arm64: dts: h3ulcb: Sound SSI support

---
This patchset is against the 'kernel/git/horms/renesas.git' repo.

 arch/arm64/boot/dts/renesas/Makefile   |   2 +-
 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 316 
+
 Documentation/devicetree/bindings/arm/shmobile.txt |   2 ++
 3 files changed, 319 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts