Re: [PATCH] thermal: rcar_gen3_thermal: Fix does not have interrupts counting
Dear Niklas-san On 2018/11/02 18:31, Niklas Söderlund wrote: Hi Hoan-san, Thanks for your patch. On 2018-10-30 18:10:01 +0900, Nguyen An Hoan wrote: From: Hoan Nguyen An This patch fixes thermal interrupts that did not happen when temprature changed. Add the function rcar_gen3_thermal_update_threshold(), this function is used to calculate the value written to the threshold registers REG_GEN3_IRQTEMP1 and REG_GEN3_IRQTEMP2. Is it really a error if the IRQ don't happen and the thermal framework use the .set_trip() callback to move the window due to the polling instead of a IRQ due to a rapid thermal increase? I think not. I do not like this patch but I'm not expert on thermal subsystem so I'm open to be proven wrong :-) I'm investigating more about this issue! This patch is based on renesas-bsp/rcar-3.5.4.rc2 ! Signed-off-by: Hoan Nguyen An --- drivers/thermal/rcar_gen3_thermal.c | 45 + 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 7aed533..009c0db 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -185,37 +185,39 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, int mcelsius) { - int celsius, val1, val2; + int val1, val2; - celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); - val1 = celsius * tsc->coef.a1 + tsc->coef.b1; - val2 = celsius * tsc->coef.a2 + tsc->coef.b2; + val1 = (mcelsius * tsc->coef.a1)/1000 + tsc->coef.b1; + val2 = (mcelsius * tsc->coef.a2)/1000 + tsc->coef.b2; This won't work I'm afraid as it can overflow. As the thcodes and ptat values can be read from hardware there theoretical max size is 0xfff according to the documentation. Those values are then used to calculate a1, b1, a2 and b2 constants. If you can prove that no overflow can happen I'm happy for this change as it increases accuracy. If so this should be posted as a separate patch. With this patch, when rcar_gen3_thermal_mcelsius_to_temp () is called, since the mcelsius value was passed is calculated from the previous formula: rcar_gen3_thermal_get_temp(): int mcelsius, val1, val2; u32 reg; /* Read register and convert to mili Celsius */ reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; val1 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, tsc->coef.a1); val2 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, tsc->coef.a2); mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2); /* Make sure we are inside specifications */ if ((mcelsius < MCELSIUS(-40)) || (mcelsius > MCELSIUS(125))) return -EIO; From int mcelsius values, val1, val2; The reverse calculation I do not think will happen the overflow! With the current situation, I am not clear about the high, low values But with (a1, b1), (a2, b2) tsc1->coef.a1 965 tsc1->coef.a2 953 tsc1->coef.b1 323853 tsc1->coef.b2 324268 tsc2->coef.a1 965 tsc2->coef.a2 954 tsc2->coef.b1 323213 tsc2->coef.b2 323640 tsc3->coef.a1 947 tsc3->coef.a2 932 tsc3->coef.b1 325163 tsc3->coef.b2 325680 with all tscX, aX <=1000. If the temperature is 1000celsius = 100 mcelsius. val1 <100 * 1000 + 323853 = 1 000 323 853 <2 147 483 647 (max int value) (In fact the temperature of the board could not get to 1000 celsius degrees ) Here the current constant values are used. But at future THCODE and PLAT values are read from registers to calculate aX, bX, I do not know whether there really will be overflow or not. If you use this patches without this part. I have received incorrect interrupts with H3ES1.1. So I need to integrate this part to ensure correctly in testing. return INT_FIXPT((val1 + val2) / 2); } -static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) +static int rcar_gen3_thermal_update_threshold(struct rcar_gen3_thermal_tsc *tsc) { - struct rcar_gen3_thermal_tsc *tsc = devdata; - - low = clamp_val(low, -4, 12); - high = clamp_val(high, -4, 12); - - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, - rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); + u32 ctemp; + int temp_code; + int mcelsius, val1, val2; - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, - rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); + ctemp = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; + val1 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b1, tsc->coef.a1); + val2 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b2, tsc->coef.a2); + mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2); - tsc->low = low; - tsc->high = high; + /* set the interrupts to exceed the temperature */ + temp_code = rcar_gen3_the
Re: [PATCH] thermal: rcar_gen3_thermal: Fix does not have interrupts counting
Hi Hoan-san, Thanks for your patch. On 2018-10-30 18:10:01 +0900, Nguyen An Hoan wrote: > From: Hoan Nguyen An > > This patch fixes thermal interrupts that did not happen when temprature > changed. > Add the function rcar_gen3_thermal_update_threshold(), this function is used > to > calculate the value written to the threshold registers REG_GEN3_IRQTEMP1 and > REG_GEN3_IRQTEMP2. Is it really a error if the IRQ don't happen and the thermal framework use the .set_trip() callback to move the window due to the polling instead of a IRQ due to a rapid thermal increase? I think not. I do not like this patch but I'm not expert on thermal subsystem so I'm open to be proven wrong :-) > > This patch is based on renesas-bsp/rcar-3.5.4.rc2 ! > > Signed-off-by: Hoan Nguyen An > --- > drivers/thermal/rcar_gen3_thermal.c | 45 > + > 1 file changed, 26 insertions(+), 19 deletions(-) > > diff --git a/drivers/thermal/rcar_gen3_thermal.c > b/drivers/thermal/rcar_gen3_thermal.c > index 7aed533..009c0db 100644 > --- a/drivers/thermal/rcar_gen3_thermal.c > +++ b/drivers/thermal/rcar_gen3_thermal.c > @@ -185,37 +185,39 @@ static int rcar_gen3_thermal_get_temp(void *devdata, > int *temp) > static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc > *tsc, > int mcelsius) > { > - int celsius, val1, val2; > + int val1, val2; > > - celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); > - val1 = celsius * tsc->coef.a1 + tsc->coef.b1; > - val2 = celsius * tsc->coef.a2 + tsc->coef.b2; > + val1 = (mcelsius * tsc->coef.a1)/1000 + tsc->coef.b1; > + val2 = (mcelsius * tsc->coef.a2)/1000 + tsc->coef.b2; This won't work I'm afraid as it can overflow. As the thcodes and ptat values can be read from hardware there theoretical max size is 0xfff according to the documentation. Those values are then used to calculate a1, b1, a2 and b2 constants. If you can prove that no overflow can happen I'm happy for this change as it increases accuracy. If so this should be posted as a separate patch. > > return INT_FIXPT((val1 + val2) / 2); > } > > -static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) > +static int rcar_gen3_thermal_update_threshold(struct rcar_gen3_thermal_tsc > *tsc) > { > - struct rcar_gen3_thermal_tsc *tsc = devdata; > - > - low = clamp_val(low, -4, 12); > - high = clamp_val(high, -4, 12); > - > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, > - rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); > + u32 ctemp; > + int temp_code; > + int mcelsius, val1, val2; > > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, > - rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); > + ctemp = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; > + val1 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b1, tsc->coef.a1); > + val2 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b2, tsc->coef.a2); > + mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2); > > - tsc->low = low; > - tsc->high = high; > + /* set the interrupts to exceed the temperature */ > + temp_code = rcar_gen3_thermal_mcelsius_to_temp(tsc, > + mcelsius + MCELSIUS(1)); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, temp_code); > + /* set the interrupts to fall below the temperature */ > + temp_code = rcar_gen3_thermal_mcelsius_to_temp(tsc, > + mcelsius - MCELSIUS(1)); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, temp_code); > > return 0; > } > > static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { > .get_temp = rcar_gen3_thermal_get_temp, > - .set_trips = rcar_gen3_thermal_set_trips, My understanding of the thermal framework is that implementing .set_trips() is correct and removing it here and rewriting is just wrong. The driver should use the framework not do it's own thing, that way all the DT properties set for hysteresis and such are used in a correct way. > }; > > static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool > on) > @@ -256,8 +258,11 @@ static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, > void *data) > int i; > > for (i = 0; i < priv->num_tscs; i++) > + { > + rcar_gen3_thermal_update_threshold(priv->tscs[i]); > thermal_zone_device_update(priv->tscs[i]->zone, > THERMAL_EVENT_UNSPECIFIED); > + } > > spin_lock_irqsave(&priv->lock, flags); > rcar_thermal_irq_set(priv, true); > @@ -306,7 +311,7 @@ static void rcar_gen3_thermal_init(struct > rcar_gen3_thermal_tsc *tsc) > > usleep_range(1000, 2000); > > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0); Th
Re: [PATCH] thermal: rcar_gen3_thermal: Fix does not have interrupts counting
Hello! On 10/30/2018 12:10 PM, Nguyen An Hoan wrote: > From: Hoan Nguyen An > > This patch fixes thermal interrupts that did not happen when temprature > changed. Temperature. > Add the function rcar_gen3_thermal_update_threshold(), this function is used > to > calculate the value written to the threshold registers REG_GEN3_IRQTEMP1 and > REG_GEN3_IRQTEMP2. > > This patch is based on renesas-bsp/rcar-3.5.4.rc2 ! > > Signed-off-by: Hoan Nguyen An > --- > drivers/thermal/rcar_gen3_thermal.c | 45 > + > 1 file changed, 26 insertions(+), 19 deletions(-) > > diff --git a/drivers/thermal/rcar_gen3_thermal.c > b/drivers/thermal/rcar_gen3_thermal.c > index 7aed533..009c0db 100644 > --- a/drivers/thermal/rcar_gen3_thermal.c > +++ b/drivers/thermal/rcar_gen3_thermal.c > @@ -185,37 +185,39 @@ static int rcar_gen3_thermal_get_temp(void *devdata, > int *temp) > static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc > *tsc, > int mcelsius) > { > - int celsius, val1, val2; > + int val1, val2; > > - celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); > - val1 = celsius * tsc->coef.a1 + tsc->coef.b1; > - val2 = celsius * tsc->coef.a2 + tsc->coef.b2; > + val1 = (mcelsius * tsc->coef.a1)/1000 + tsc->coef.b1; > + val2 = (mcelsius * tsc->coef.a2)/1000 + tsc->coef.b2; Need spaces around /. [...] MBR, Sergei
Re: [PATCH] thermal: rcar_gen3_thermal: Fix does not have interrupts counting
CC actual maintainer, developer, and subsystem On Tue, Oct 30, 2018 at 10:10 AM Nguyen An Hoan wrote: > From: Hoan Nguyen An > > This patch fixes thermal interrupts that did not happen when temprature > changed. > Add the function rcar_gen3_thermal_update_threshold(), this function is used > to > calculate the value written to the threshold registers REG_GEN3_IRQTEMP1 and > REG_GEN3_IRQTEMP2. > > This patch is based on renesas-bsp/rcar-3.5.4.rc2 ! > > Signed-off-by: Hoan Nguyen An > --- > drivers/thermal/rcar_gen3_thermal.c | 45 > + > 1 file changed, 26 insertions(+), 19 deletions(-) > > diff --git a/drivers/thermal/rcar_gen3_thermal.c > b/drivers/thermal/rcar_gen3_thermal.c > index 7aed533..009c0db 100644 > --- a/drivers/thermal/rcar_gen3_thermal.c > +++ b/drivers/thermal/rcar_gen3_thermal.c > @@ -185,37 +185,39 @@ static int rcar_gen3_thermal_get_temp(void *devdata, > int *temp) > static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc > *tsc, > int mcelsius) > { > - int celsius, val1, val2; > + int val1, val2; > > - celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); > - val1 = celsius * tsc->coef.a1 + tsc->coef.b1; > - val2 = celsius * tsc->coef.a2 + tsc->coef.b2; > + val1 = (mcelsius * tsc->coef.a1)/1000 + tsc->coef.b1; > + val2 = (mcelsius * tsc->coef.a2)/1000 + tsc->coef.b2; > > return INT_FIXPT((val1 + val2) / 2); > } > > -static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) > +static int rcar_gen3_thermal_update_threshold(struct rcar_gen3_thermal_tsc > *tsc) > { > - struct rcar_gen3_thermal_tsc *tsc = devdata; > - > - low = clamp_val(low, -4, 12); > - high = clamp_val(high, -4, 12); > - > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, > - rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); > + u32 ctemp; > + int temp_code; > + int mcelsius, val1, val2; > > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, > - rcar_gen3_thermal_mcelsius_to_temp(tsc, > high)); > + ctemp = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; > + val1 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b1, tsc->coef.a1); > + val2 = FIXPT_DIV(FIXPT_INT(ctemp) - tsc->coef.b2, tsc->coef.a2); > + mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2); > > - tsc->low = low; > - tsc->high = high; > + /* set the interrupts to exceed the temperature */ > + temp_code = rcar_gen3_thermal_mcelsius_to_temp(tsc, > + mcelsius + MCELSIUS(1)); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, temp_code); > + /* set the interrupts to fall below the temperature */ > + temp_code = rcar_gen3_thermal_mcelsius_to_temp(tsc, > + mcelsius - MCELSIUS(1)); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, temp_code); > > return 0; > } > > static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { > .get_temp = rcar_gen3_thermal_get_temp, > - .set_trips = rcar_gen3_thermal_set_trips, > }; > > static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool > on) > @@ -256,8 +258,11 @@ static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, > void *data) > int i; > > for (i = 0; i < priv->num_tscs; i++) > + { > + rcar_gen3_thermal_update_threshold(priv->tscs[i]); > thermal_zone_device_update(priv->tscs[i]->zone, >THERMAL_EVENT_UNSPECIFIED); > + } > > spin_lock_irqsave(&priv->lock, flags); > rcar_thermal_irq_set(priv, true); > @@ -306,7 +311,7 @@ static void rcar_gen3_thermal_init(struct > rcar_gen3_thermal_tsc *tsc) > > usleep_range(1000, 2000); > > - rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F); > + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0); > rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); > rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); > > @@ -414,6 +419,8 @@ static int rcar_gen3_thermal_probe(struct platform_device > *pdev) > priv->thermal_init(tsc); > rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]); > > + rcar_gen3_thermal_update_threshold(tsc); > + > zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, > > &rcar_gen3_tz_of_ops); > if (IS_ERR(zone)) { > @@ -465,7 +472,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct > device *dev) > struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; > > priv->thermal_init(tsc); > - rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high); > +