Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
On Sun, Nov 16, 2014 at 07:47:02AM +0530, Abhilash Kesavan wrote: Hello Greg, On Tue, Nov 11, 2014 at 7:55 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Greg, On Tue, Sep 30, 2014 at 8:02 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Tomasz, On Tue, Sep 30, 2014 at 4:08 AM, Tomasz Figa tomasz.f...@gmail.com wrote: Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. I will post patches removing these two symbols. I posted a couple of patches handling Tomasz' comments but Kukjin prefers the approach in this patch (Discussion here: http://www.spinics.net/lists/linux-samsung-soc/msg38742.html). Can you please review the patch. This is a gentle reminder. The patch is required for serial enablement on the new exynos7 SoC, kindly take a look. What patch? I fail to see anything in my inboxes that I can apply, only this long thread that makes no sense at all. Please resend anything that you want to have applied, in a format that I can apply it, _AND_ get everyone to agree that it is the correct solution. Asking me to go look up random web archives, of mailing list threads I was never copied on, is a sure way to get your email ignored, as again, there is nothing I can do with it. You know better than this. greg k-h -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
Hello Greg, On Mon, Nov 17, 2014 at 2:40 AM, gre...@linuxfoundation.org gre...@linuxfoundation.org wrote: On Sun, Nov 16, 2014 at 07:47:02AM +0530, Abhilash Kesavan wrote: Hello Greg, On Tue, Nov 11, 2014 at 7:55 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Greg, On Tue, Sep 30, 2014 at 8:02 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Tomasz, On Tue, Sep 30, 2014 at 4:08 AM, Tomasz Figa tomasz.f...@gmail.com wrote: Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. I will post patches removing these two symbols. I posted a couple of patches handling Tomasz' comments but Kukjin prefers the approach in this patch (Discussion here: http://www.spinics.net/lists/linux-samsung-soc/msg38742.html). Can you please review the patch. This is a gentle reminder. The patch is required for serial enablement on the new exynos7 SoC, kindly take a look. What patch? I fail to see anything in my inboxes that I can apply, only this long thread that makes no sense at all. Please resend anything that you want to have applied, in a format that I can apply it, _AND_ get everyone to agree that it is the correct solution. Asking me to go look up random web archives, of mailing list threads I was never copied on, is a sure way to get your email ignored, as again, there is nothing I can do with it. You know better than this. Apologies for the patch not reaching you. I will re-send it right now. Kukjin Kim has already approved the approach under discussion; however the patch needs to go via Kukjin's tree due to other patches that depend on it. Hence, I require your ack on it. Once again, sorry for the inconvenience. Thanks, Abhilash -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
Hello Greg, On Tue, Nov 11, 2014 at 7:55 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Greg, On Tue, Sep 30, 2014 at 8:02 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Tomasz, On Tue, Sep 30, 2014 at 4:08 AM, Tomasz Figa tomasz.f...@gmail.com wrote: Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. I will post patches removing these two symbols. I posted a couple of patches handling Tomasz' comments but Kukjin prefers the approach in this patch (Discussion here: http://www.spinics.net/lists/linux-samsung-soc/msg38742.html). Can you please review the patch. This is a gentle reminder. The patch is required for serial enablement on the new exynos7 SoC, kindly take a look. Thanks, Abhilash -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
Hi Greg, On Tue, Sep 30, 2014 at 8:02 PM, Abhilash Kesavan kesavan.abhil...@gmail.com wrote: Hi Tomasz, On Tue, Sep 30, 2014 at 4:08 AM, Tomasz Figa tomasz.f...@gmail.com wrote: Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. I will post patches removing these two symbols. I posted a couple of patches handling Tomasz' comments but Kukjin prefers the approach in this patch (Discussion here: http://www.spinics.net/lists/linux-samsung-soc/msg38742.html). Can you please review the patch. Regards, Abhilash Regards, Abhilash Best regards, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
Hi Tomasz, On Tue, Sep 30, 2014 at 4:08 AM, Tomasz Figa tomasz.f...@gmail.com wrote: Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. I will post patches removing these two symbols. Regards, Abhilash Best regards, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] serial: samsung: Fix serial config dependencies for exynos7
Hi Abhilash, The patch itself seems fine, but I wonder if those config options aren't really just leftovers from the past and couldn't be completely removed. On 29.09.2014 07:16, Abhilash Kesavan wrote: From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs The only place where this symbol is used is below. config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help With this symbol the situation isn't that easy, but still should be manageable. Looking at the serial-samsung driver, all occurrences of CONFIG_SERIAL_SAMSUNG_UARTS could be simply replaced with a locally defined number equal to the maximum value - in this case 4. There are also two places in arch/arm where this symbol is used: 1) In arch/arm/mach-s3c64xx/irq-pm.c it's used as the number of serial ports which need suspend/resume handling. Since on s3c64xx the number is always 4, it can be simply defined locally as a constant. 2) In arch/arm/plat-samsung/init.c it is used to determine size of a static array of UART ports and to check whether the UART driver is enabled. In former case I believe it should be safe to hardcode it to 4 as well, in latter CONFIG_SERIAL_SAMSUNG can be used. Best regards, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] serial: samsung: Fix serial config dependencies for exynos7
From: Pankaj Dubey pankaj.du...@samsung.com Exynos7 has a similar serial controller to that present in older Samsung SoCs. To re-use the existing serial driver on Exynos7 we need to have SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not possible because these symbols are dependent on PLAT_SAMSUNG which is not present for the ARMv8 based exynos7. Change the dependency of these symbols from PLAT_SAMSUNG to the serial driver thus making it available on exynos7. As the existing platform specific code making use of these symbols is related to uart driver this change in dependency should not cause any issues. Signed-off-by: Pankaj Dubey pankaj.du...@samsung.com Signed-off-by: Naveen Krishna Chatradhi ch.nav...@samsung.com Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com Cc: Greg Kroah-Hartman gre...@linuxfoundation.org --- Build tested with s3c6400_defconfig, exynos_defconfig and arm64's defconfig with and without the serial driver enabled. drivers/tty/serial/Kconfig |4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 81f6ee7..e6c0bcb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -249,14 +249,14 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs config SERIAL_SAMSUNG_UARTS int - depends on PLAT_SAMSUNG + depends on SERIAL_SAMSUNG default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help -- 1.7.9.5 -- To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html