This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
Like s5k6a3, it is also another fimc-is firmware controlled
sensor. This minimal sensor driver doesn't do any I2C communications
as its done by ISP firmware. It can be updated if needed to a
regular sensor driver by adding the I2C communication.
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
.../devicetree/bindings/media/i2c/s5k4e5.txt | 45 +++
drivers/media/i2c/Kconfig |8 +
drivers/media/i2c/Makefile |1 +
drivers/media/i2c/s5k4e5.c | 347
4 files changed, 401 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
create mode 100644 drivers/media/i2c/s5k4e5.c
diff --git a/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
b/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
new file mode 100644
index 000..0fca087
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
@@ -0,0 +1,45 @@
+* Samsung S5K4E5 Raw Image Sensor
+
+S5K4E5 is a raw image sensor with maximum resolution of 2560x1920
+pixels. Data transfer is carried out via MIPI CSI-2 port and controls
+via I2C bus.
+
+Required Properties:
+- compatible : must be samsung,s5k4e5
+- reg : I2C device address
+- reset-gpios : specifier of a GPIO connected to the RESET pin
+- clocks : should contain the sensor's EXTCLK clock specifier, from
+ the common clock bindings
+- clock-names : should contain extclk entry
+- svdda-supply : core voltage supply
+- svddio-supply: I/O voltage supply
+
+Optional Properties:
+- clock-frequency : the frequency at which the extclk clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used
+
+The device node should be added to respective control bus controller
+(e.g. I2C0) nodes and linked to the csis port node, using the common
+video interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+ i2c-isp@1313 {
+ s5k4e5@20 {
+ compatible = samsung,s5k4e5;
+ reg = 0x20;
+ reset-gpios = gpx1 2 1;
+ clock-frequency = 2400;
+ clocks = clock 129;
+ clock-names = extclk
+ svdda-supply = ...;
+ svddio-supply = ...;
+ port {
+ is_s5k4e5_ep: endpoint {
+ data-lanes = 1 2 3 4;
+ remote-endpoint = csis0_ep;
+ };
+ };
+ };
+ };
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index f7e9147..271028b 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -572,6 +572,14 @@ config VIDEO_S5K6A3
This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
camera sensor.
+config VIDEO_S5K4E5
+ tristate Samsung S5K4E5 sensor support
+ depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C VIDEO_V4L2 VIDEO_V4L2_SUBDEV_API OF
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K4E5 raw
+ camera sensor.
+
config VIDEO_S5K4ECGX
tristate Samsung S5K4ECGX sensor support
depends on I2C VIDEO_V4L2 VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index cf3cf03..0aeed8e 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30)+= noon010pc30.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o
+obj-$(CONFIG_VIDEO_S5K4E5) += s5k4e5.o
obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
obj-$(CONFIG_VIDEO_S5C73M3)+= s5c73m3/
obj-$(CONFIG_VIDEO_ADP1653)+= adp1653.o
diff --git a/drivers/media/i2c/s5k4e5.c b/drivers/media/i2c/s5k4e5.c
new file mode 100644
index 000..639062b
--- /dev/null
+++ b/drivers/media/i2c/s5k4e5.c
@@ -0,0 +1,347 @@
+/*
+ * Samsung S5K4E5 image sensor driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Arun Kumar K arun...@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include linux/clk.h
+#include linux/delay.h
+#include linux/device.h
+#include linux/errno.h
+#include linux/gpio.h
+#include linux/i2c.h
+#include linux/kernel.h
+#include linux/module.h
+#include linux/of_gpio.h
+#include linux/pm_runtime.h
+#include linux/regulator/consumer.h
+#include linux/slab.h
+#include
