Hi linux-scsi people, the problem described (and worked around) during the conversation below seems to be related to your realm. I apologize if this is redundant and for not taking my own time to suggest a patch for it. However, as it affects users, I still wanted to get it out of my backlog and at least mention it here.
Cheers Daniel -------- Original Message -------- Subject: Re: New USB storage device, not detected by Ubuntu 12.10 (kernel 3.5.0-17-generic) Date: Sun, 27 Jan 2013 13:22:42 -0800 From: Matthew Dharm <mdharm-...@one-eyed-alien.net> To: Daniel <dan...@makrotopia.org> I don't know. You would need to ask the linux-scsi mailing lists. Matt On Sun, Jan 27, 2013 at 3:48 AM, Daniel <dan...@makrotopia.org> wrote: > Hi Matt, > > the delay_use parameter to usb-storage doesn't solve the problem. It seems > like the delay has to be added to scsi_mod via scsi_inq_timeout=25 for this > harddrive to be detected properly (and this obviously needs to be set > already in the initramfs when scsi_mod is initially loaded). > Is there any way scsi_inq_timeout can be raised on a per device/vendor > basis? > > Thank you for your support! > > > Cheers > > > Daniel > > > > On 27.01.2013 02:33, Matthew Dharm wrote: >> >> In that case, this is an easy fix. There is already a parameter for this. >> >> When you load the usb-storage module, add the "delay_use=5" parameter >> -- that will add a 5-second delay before scanning for the device. >> >> Through much of 2.6.x, the default for this parameter was 5 seconds. >> Later is was changed to 1 second (I guess people didn't like to wait). >> Try playing around with the value to find something you like, and >> then you can configure that to be the default via modprobe.conf >> >> Matt >> >> On Sat, Jan 26, 2013 at 10:22 AM, Daniel <dan...@makrotopia.org> wrote: >>> >>> Hi again, >>> >>> I just figured out that calling >>> echo "scsi add-single-device 8 0 0 0" > /proc/scsi/scsi >>> (with 8 being the usb-storage controller for that device) >>> makes it work if called a few seconds after adding the device. >>> Probably the waiting time before probing is not high enough and a quirk >>> for that >>> device needs to be added. >>> >>> Cheers >>> >>> >>> Daniel >>> >>> On 01/26/2013 07:54 PM, Matthew Dharm wrote: >>>> >>>> Is this a kernel you compiled yourself? >>>> >>>> Did you compile in the SCSI disk modules? >>>> >>>> Are you saying that /proc/scsi/scsi is empty? >>>> >>>> You may have to compile with USB Storage Verbose Debug enabled and >>>> capture a log from that... >>>> >>>> Matt >>>> >>>> On Sat, Jan 26, 2013 at 9:41 AM, Daniel <dan...@makrotopia.org> wrote: >>>>> >>>>> Hi Matt, >>>>> >>>>> thank you for getting back to me after just a few minutes! You are >>>>> doing an >>>>> amazing job! >>>>> So this is a Transcend StoreJet 1TB external 2.5" HDD connected via >>>>> USB. >>>>> I meanwhile also tried it on another machine which runs kernel >>>>> 3.8.0rc1, the >>>>> result is the same. >>>>> It shows up as a usb-sata-bridge and usb-storage seems to detect it. >>>>> However, no connected SCSI device shows up in /proc/scsi/scsi . >>>>> If you need any more information or if I can assist in any way (I'm >>>>> familiar >>>>> with compiling the kernel form source) >>>>> >>>>> Thank you much! >>>>> >>>>> >>>>> Daniel >>>>> >>>>> >>>>> from lsusb -v >>>>> Bus 002 Device 004: ID 152d:2329 JMicron Technology Corp. / JMicron USA >>>>> Technology Corp. JM20329 SATA Bridge >>>>> Device Descriptor: >>>>> bLength 18 >>>>> bDescriptorType 1 >>>>> bcdUSB 2.00 >>>>> bDeviceClass 0 (Defined at Interface level) >>>>> bDeviceSubClass 0 >>>>> bDeviceProtocol 0 >>>>> bMaxPacketSize0 64 >>>>> idVendor 0x152d JMicron Technology Corp. / JMicron USA >>>>> Technology Corp. >>>>> idProduct 0x2329 JM20329 SATA Bridge >>>>> bcdDevice 0.00 >>>>> iManufacturer 1 >>>>> iProduct 11 >>>>> iSerial 5 >>>>> bNumConfigurations 1 >>>>> Configuration Descriptor: >>>>> bLength 9 >>>>> bDescriptorType 2 >>>>> wTotalLength 32 >>>>> bNumInterfaces 1 >>>>> bConfigurationValue 1 >>>>> iConfiguration 4 >>>>> bmAttributes 0xc0 >>>>> Self Powered >>>>> MaxPower 2mA >>>>> Interface Descriptor: >>>>> bLength 9 >>>>> bDescriptorType 4 >>>>> bInterfaceNumber 0 >>>>> bAlternateSetting 0 >>>>> bNumEndpoints 2 >>>>> bInterfaceClass 8 Mass Storage >>>>> bInterfaceSubClass 6 SCSI >>>>> bInterfaceProtocol 80 Bulk-Only >>>>> iInterface 6 >>>>> Endpoint Descriptor: >>>>> bLength 7 >>>>> bDescriptorType 5 >>>>> bEndpointAddress 0x81 EP 1 IN >>>>> bmAttributes 2 >>>>> Transfer Type Bulk >>>>> Synch Type None >>>>> Usage Type Data >>>>> wMaxPacketSize 0x0200 1x 512 bytes >>>>> bInterval 0 >>>>> Endpoint Descriptor: >>>>> bLength 7 >>>>> bDescriptorType 5 >>>>> bEndpointAddress 0x02 EP 2 OUT >>>>> bmAttributes 2 >>>>> Transfer Type Bulk >>>>> Synch Type None >>>>> Usage Type Data >>>>> wMaxPacketSize 0x0200 1x 512 bytes >>>>> bInterval 0 >>>>> >>>>> >>>>> from kernel log: >>>>> [ 91.313769] usb 2-1.5: USB disconnect, device number 3 >>>>> [ 101.030552] usb 2-1.5: new high-speed USB device number 4 using >>>>> ehci_hcd >>>>> [ 101.123500] usb 2-1.5: New USB device found, idVendor=152d, >>>>> idProduct=2329 >>>>> [ 101.123506] usb 2-1.5: New USB device strings: Mfr=1, Product=11, >>>>> SerialNumber=5 >>>>> [ 101.123509] usb 2-1.5: Product: StoreJet Transcend >>>>> [ 101.123512] usb 2-1.5: Manufacturer: JMicron >>>>> [ 101.123515] usb 2-1.5: SerialNumber: WD5WX51A61H8060 >>>>> [ 101.124331] scsi5 : usb-storage 2-1.5:1.0 >>>>> >>>>> >>>>> >>>>> On 26.01.2013 17:14, Matthew Dharm wrote: >>>>>> >>>>>> >>>>>> Please provide lsusb output showing the device attached. >>>>>> >>>>>> I'm assuming that you're sending this e-mail because you don't think >>>>>> the device is working properly. Can you describe what this device is, >>>>>> and what you think should happen when it is attached, and what >>>>>> actually happens when it is attached? >>>>>> >>>>>> Matt >>>>>> >>>>>> On Sat, Jan 26, 2013 at 8:42 AM, Daniel <dan...@makrotopia.org> wrote: >>>>>>> >>>>>>> >>>>>>> Please add this device to usb-storage >>>>>>> [ 1078.279850] usb 2-1.5: >new high-speed USB device number 6 using >>>>>>> ehci_hcd >>>>>>> [ 1078.372757] usb 2-1.5: >New USB device found, idVendor=152d, >>>>>>> idProduct=2329 >>>>>>> [ 1078.372768] usb 2-1.5: >New USB device strings: Mfr=1, Product=11, >>>>>>> SerialNumber=5 >>>>>>> [ 1078.372775] usb 2-1.5: >Product: StoreJet Transcend >>>>>>> [ 1078.372782] usb 2-1.5: >Manufacturer: JMicron >>>>>>> [ 1078.372788] usb 2-1.5: >SerialNumber: WD5WX51A61H8060 >>>>>>> >>>>>>> >>>>>>> Cheers >>>>>>> >>>>>>> >>>>>>> Daniel >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
