Re: [PATCH 0/7] qla4xxx: Updates for scsi "misc" branch
On 07/08/2013 06:33 AM, adheer.chandravan...@qlogic.com wrote: > From: Adheer Chandravanshi > > James, > > Please apply the following patches to the scsi tree at your earliest > convenience. > > Adheer Chandravanshi (7): > qla4xxx: Allow removal of failed session using logout. > qla4xxx: Use discovery_parent_idx instead of discovery_parent_type > qla4xxx: Set IPv6 traffic class if device type is IPv6. > qla4xxx: discovery_parent_idx can be shown without any check. > qla4xxx: Only BIOS boot target entries should be at index 0 and 1. > qla4xxx: Export more firmware info in sysfs > qla4xxx: Update driver version to 5.03.00-k11 > Ignore my comment on that one patch. Patches look ok. Reviewed-by: Mike Christie -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 0/7] qla4xxx: Updates for scsi "misc" branch
Hi James, Some of the interfaces like about firmware we can make generic. And we are still discussing internally, if we can really make the Address Control Block (ACB) interface generic or not. May be we will re-submit the patches without the ACB (which is still under discussion) in next week. Thanks, Lalit. > -Original Message- > From: James Bottomley [mailto:james.bottom...@hansenpartnership.com] > Sent: Tuesday, November 13, 2012 7:05 PM > To: Michael Christie > Cc: Vikas Chaudhary; linux-scsi@vger.kernel.org; Lalit Chandivade; Ravi > Anand > Subject: Re: [PATCH 0/7] qla4xxx: Updates for scsi "misc" branch > > On Wed, 2012-10-10 at 11:08 -0500, Michael Christie wrote: > > On Oct 10, 2012, at 6:24 AM, vikas.chaudh...@qlogic.com wrote: > > > > > From: Vikas Chaudhary > > > > > > James, > > > > > > Please apply the following patches to the scsi tree at your earliest > > > convenience. > > > > > > Thanks, > > > Vikas. > > > > > > > I think some of these should be common operations instead of vendor > ones. > > > > > > > Adheer Chandravanshi (1): > > > qla4xxx: Added new BSG command QLISCSI_VND_ABOUT_FIRMWARE > > > > > > > What info does this provide? > > > > > > > Harish Zunjarrao (3): > > > qla4xxx: Allow reset in link down case > > > qla4xxx: Invoke Set Address Control Block using BSG > > > > Does this set the networking info? > > > > > > > qla4xxx: Invoke DisableACB using BSG > > > > What does this do? Disable the networking? > > Ping on this, please. Mike's points seem eminently sensible, what is > the response? > > James > > This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message. N�r��yb�X��ǧv�^�){.n�+{���"�{ay�ʇڙ�,j��f���h���z��w��� ���j:+v���w�j�mzZ+�ݢj"��!�i
Re: [PATCH 0/7] qla4xxx: Updates for scsi "misc" branch
On Wed, 2012-10-10 at 11:08 -0500, Michael Christie wrote: > On Oct 10, 2012, at 6:24 AM, vikas.chaudh...@qlogic.com wrote: > > > From: Vikas Chaudhary > > > > James, > > > > Please apply the following patches to the scsi tree at your earliest > > convenience. > > > > Thanks, > > Vikas. > > > > I think some of these should be common operations instead of vendor ones. > > > > Adheer Chandravanshi (1): > > qla4xxx: Added new BSG command QLISCSI_VND_ABOUT_FIRMWARE > > > > What info does this provide? > > > > Harish Zunjarrao (3): > > qla4xxx: Allow reset in link down case > > qla4xxx: Invoke Set Address Control Block using BSG > > Does this set the networking info? > > > > qla4xxx: Invoke DisableACB using BSG > > What does this do? Disable the networking? Ping on this, please. Mike's points seem eminently sensible, what is the response? James -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 0/7] qla4xxx: Updates for scsi "misc" branch
On Oct 10, 2012, at 6:24 AM, vikas.chaudh...@qlogic.com wrote: > From: Vikas Chaudhary > > James, > > Please apply the following patches to the scsi tree at your earliest > convenience. > > Thanks, > Vikas. > I think some of these should be common operations instead of vendor ones. > Adheer Chandravanshi (1): > qla4xxx: Added new BSG command QLISCSI_VND_ABOUT_FIRMWARE > What info does this provide? > Harish Zunjarrao (3): > qla4xxx: Allow reset in link down case > qla4xxx: Invoke Set Address Control Block using BSG Does this set the networking info? > qla4xxx: Invoke DisableACB using BSG What does this do? Disable the networking? > Manish Rangankar (2): > qla4xxx: Add get default DDB support using BSG. What does this do? Get the default DDB settings? > qla4xxx: Add get DDB support using BSG. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html