Am Montag, 31. März 2014 09:04:23 UTC+2 schrieb Hans de Goede:
Hi,
On 03/30/2014 11:37 PM, markus.roppelt wrote:
Am Donnerstag, 27. März 2014 19:50:32 UTC+1 schrieb Ezaul Zillmer:
Ok Muito Obrigado!
;)
Em quinta-feira, 27 de março de 2014 15h19min58s UTC-3, Hans de Goede
escreveu:Hi,
To build this you should do:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
Regards,
Hans
On 03/27/2014 06:33 PM, Ezaul Zillmer wrote:
Good Afternoon Doctor Hans
Updated my u-boot
I wonder how was the logic I tried to compile it like this:
./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
No dick: (could correct me where I am going wrong!
Hug Since Thank you much longer
Hi Hans,
I tested the new u-boot with your newest kernel (3.14.0-rc8+) on the
cubietruck.
I found two issues so far. It seems that only one CPU is initialized
correctly:
[0.049402] /cpus/cpu@0 missing clock-frequency property
[0.049433] /cpus/cpu@1 missing clock-frequency property
[0.049447] CPU0: thread -1, cpu 0, socket 0, mpidr 8000
[0.049479] Setting up static identity map for 0x4073f2d0 - 0x4073f368
[0.058595] CPU1: failed to boot: -38
[0.058647] Brought up 1 CPUs
[0.058655] SMP: Total of 1 processors activated.
[0.058662] CPU: All CPU(s) started in SVC mode.
[0.059721] devtmpfs: initialized
[0.064475] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 4
Also kvm does not work and there is no /dev/kvm device.
[0.176760] kvm [1]: HYP mode not available
Here is the full dmesg output: http://pastebin.com/V72FAzmp
Did you use the sunxi-next branch ? What you're seeing is typical behavior
from using
the regular sunxi branch of u-boot-sunxi.
Regards,
Hans
Hi Hans,
you're right. I rebuilt u-boot with the following commands (under Fedora 20)
and now it works as excepted:
git clone --depth=1 https://github.com/jwrdegoede/u-boot-sunxi.git -b
sunxi-next
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnu- Cubietruck_config
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnu-
I was somehow on the wrong branch.
The following is still printed, but I don't know if this is a bug, as the board
runs without problems.
[0.049038] /cpus/cpu@0 missing clock-frequency property
[0.049066] /cpus/cpu@1 missing clock-frequency property
Here is the full dmesg: http://pastebin.com/myei59hG
Greetings
Markus
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.