On Sun, 12 Oct 2014 03:49:17 +0300 Siarhei Siamashka <siarhei.siamas...@gmail.com> wrote:
> This is a 7" tablet with Allwinner A20 SoC. More details at > http://linux-sunxi.org/MSI_Primo73 > > DRAM settings are the same as in the pre-installed Android firmware. > Reliability has been verified by using the lima-memtester tool in two > configurations: > 1. the default "dram_clock=384MHz, dcdc3=1.250V" settings > 2. artificially adjusted "dram_clock=408MHz, dcdc3=1.225V" settings > (DRAM clock frequency increased by one step and dcdc3 voltage > reduced by one step). > No problems have been detected in either of them after several hours > of running tests. > > Signed-off-by: Siarhei Siamashka <siarhei.siamas...@gmail.com> > --- > board/sunxi/Makefile | 1 + > boards.cfg | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile > index 478f913..d0618dd 100644 > --- a/board/sunxi/Makefile > +++ b/board/sunxi/Makefile > @@ -75,6 +75,7 @@ obj-$(CONFIG_MK802_A10S) += dram_mk802_a10s.o > obj-$(CONFIG_MK802II) += dram_sun4i_408_1024_iow8.o > obj-$(CONFIG_MK802II_A20) += dram_mk802ii_a20.o > obj-$(CONFIG_MK808C_A20) += dram_sun7i_384_1024_iow16.o > +obj-$(CONFIG_MSI_PRIMO73) += dram_sun7i_384_1024_iow16.o > obj-$(CONFIG_OLIMEX_A13_SOM) += dram_sun5i_408_512_busw16_iow16.o > obj-$(CONFIG_OLIMEX_A20_SOM) += dram_sun7i_384_1024_iow16.o > obj-$(CONFIG_PCDUINO) += dram_sun4i_408_1024_iow8.o > diff --git a/boards.cfg b/boards.cfg > index 61f1fa2..e90776f 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -454,6 +454,7 @@ Active arm armv7 sunxi - > sunxi > Active arm armv7 sunxi - sunxi > mk802ii_A20 sun7i:MK802II_A20,SPL > > - > Active arm armv7 sunxi - sunxi > mk802ii sun4i:MK802II,SPL > > - > Active arm armv7 sunxi - sunxi > mk808c_A20 sun7i:MK808C_A20,SPL > > - > +Active arm armv7 sunxi - sunxi > MSI_Primo73 sun7i:MSI_PRIMO73,SPL > > - > Active arm armv7 sunxi - sunxi > OLIMEX-A13-SOM > sun5i:OLIMEX_A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2 > - > Active arm armv7 sunxi - sunxi > Olimex_A20-SOM > sun7i:OLIMEX_A20_SOM,SPL,SUNXI_GMAC,RGMII,STATUSLED1=245,FAST_MBUS > - > Active arm armv7 sunxi - sunxi > pcDuino sun4i:PCDUINO,SPL,SUNXI_EMAC > > - There have been no objections so far, pushed to https://github.com/linux-sunxi/u-boot-sunxi -- Best regards, Siarhei Siamashka -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.