Re: [linux-sunxi] Re: New u-boot sunxi-next available for testing
Am Montag, 31. März 2014 09:04:23 UTC+2 schrieb Hans de Goede: Hi, On 03/30/2014 11:37 PM, markus.roppelt wrote: Am Donnerstag, 27. März 2014 19:50:32 UTC+1 schrieb Ezaul Zillmer: Ok Muito Obrigado! ;) Em quinta-feira, 27 de março de 2014 15h19min58s UTC-3, Hans de Goede escreveu:Hi, To build this you should do: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Regards, Hans On 03/27/2014 06:33 PM, Ezaul Zillmer wrote: Good Afternoon Doctor Hans Updated my u-boot I wonder how was the logic I tried to compile it like this: ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- No dick: (could correct me where I am going wrong! Hug Since Thank you much longer Hi Hans, I tested the new u-boot with your newest kernel (3.14.0-rc8+) on the cubietruck. I found two issues so far. It seems that only one CPU is initialized correctly: [0.049402] /cpus/cpu@0 missing clock-frequency property [0.049433] /cpus/cpu@1 missing clock-frequency property [0.049447] CPU0: thread -1, cpu 0, socket 0, mpidr 8000 [0.049479] Setting up static identity map for 0x4073f2d0 - 0x4073f368 [0.058595] CPU1: failed to boot: -38 [0.058647] Brought up 1 CPUs [0.058655] SMP: Total of 1 processors activated. [0.058662] CPU: All CPU(s) started in SVC mode. [0.059721] devtmpfs: initialized [0.064475] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 Also kvm does not work and there is no /dev/kvm device. [0.176760] kvm [1]: HYP mode not available Here is the full dmesg output: http://pastebin.com/V72FAzmp Did you use the sunxi-next branch ? What you're seeing is typical behavior from using the regular sunxi branch of u-boot-sunxi. Regards, Hans Hi Hans, you're right. I rebuilt u-boot with the following commands (under Fedora 20) and now it works as excepted: git clone --depth=1 https://github.com/jwrdegoede/u-boot-sunxi.git -b sunxi-next make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnu- Cubietruck_config make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnu- I was somehow on the wrong branch. The following is still printed, but I don't know if this is a bug, as the board runs without problems. [0.049038] /cpus/cpu@0 missing clock-frequency property [0.049066] /cpus/cpu@1 missing clock-frequency property Here is the full dmesg: http://pastebin.com/myei59hG Greetings Markus -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: New u-boot sunxi-next available for testing
Am Donnerstag, 27. März 2014 19:50:32 UTC+1 schrieb Ezaul Zillmer: Ok Muito Obrigado! ;) Em quinta-feira, 27 de março de 2014 15h19min58s UTC-3, Hans de Goede escreveu:Hi, To build this you should do: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Regards, Hans On 03/27/2014 06:33 PM, Ezaul Zillmer wrote: Good Afternoon Doctor Hans Updated my u-boot I wonder how was the logic I tried to compile it like this: ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- No dick: (could correct me where I am going wrong! Hug Since Thank you much longer Hi Hans, I tested the new u-boot with your newest kernel (3.14.0-rc8+) on the cubietruck. I found two issues so far. It seems that only one CPU is initialized correctly: [0.049402] /cpus/cpu@0 missing clock-frequency property [0.049433] /cpus/cpu@1 missing clock-frequency property [0.049447] CPU0: thread -1, cpu 0, socket 0, mpidr 8000 [0.049479] Setting up static identity map for 0x4073f2d0 - 0x4073f368 [0.058595] CPU1: failed to boot: -38 [0.058647] Brought up 1 CPUs [0.058655] SMP: Total of 1 processors activated. [0.058662] CPU: All CPU(s) started in SVC mode. [0.059721] devtmpfs: initialized [0.064475] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 Also kvm does not work and there is no /dev/kvm device. [0.176760] kvm [1]: HYP mode not available Here is the full dmesg output: http://pastebin.com/V72FAzmp Greetings Markus -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[linux-sunxi] Re: New u-boot sunxi-next available for testing
Good Afternoon Doctor Hans Updated my u-boot I wonder how was the logic I tried to compile it like this: ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- No dick: (could correct me where I am going wrong! Hug Since Thank you much longer -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: New u-boot sunxi-next available for testing
Hi, To build this you should do: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Cubieboard2_config make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- Regards, Hans On 03/27/2014 06:33 PM, Ezaul Zillmer wrote: Good Afternoon Doctor Hans Updated my u-boot I wonder how was the logic I tried to compile it like this: ./mkconfig ARCH=arm CPU=armv7 SOC=sunxi BOARD=Cubieboard2 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- No dick: (could correct me where I am going wrong! Hug Since Thank you much longer -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
