VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
Found the solution! Changing BIOS settings to the values on the screenshots above made the trick! Supermicro X9SRI-F now works with PCI-E USB 3.0 card on x86_64 linux
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
when i disable IOMMU -> "Enable Intel DMA Remapping Device by default" the USB flash drive becomes completely invisible. Same stuff when i completely disable recompile kernel without IOMMU 2017-02-19 6:48 GMT+03:00 c400 <c400c...@gmail.com>: > [ 804.441424] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd > [ 804.462165] usb 4-1: New USB device found, idVendor=0951, idProduct=1656 > [ 804.462169] usb 4-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 804.462172] usb 4-1: Product: DT Ultimate G2 > [ 804.462174] usb 4-1: Manufacturer: Kingston > [ 804.462176] usb 4-1: SerialNumber: 0018F3D97163BB71B1480004 > [ 804.462182] device: '4-1': device_add > [ 804.462219] bus: 'usb': add device 4-1 > [ 804.462226] PM: Adding info for usb:4-1 > [ 804.462266] bus: 'usb': driver_probe_device: matched device 4-1 > with driver usb > [ 804.462267] bus: 'usb': really_probe: probing driver usb with device 4-1 > [ 804.462270] devices_kset: Moving 4-1 to end of list > [ 804.462652] device: '4-1:1.0': device_add > [ 804.462664] bus: 'usb': add device 4-1:1.0 > [ 804.462668] PM: Adding info for usb:4-1:1.0 > [ 804.462686] bus: 'usb': driver_probe_device: matched device 4-1:1.0 > with driver usb-storage > [ 804.462688] bus: 'usb': really_probe: probing driver usb-storage > with device 4-1:1.0 > [ 804.462691] devices_kset: Moving 4-1:1.0 to end of list > [ 804.462697] usb-storage 4-1:1.0: USB Mass Storage device detected > [ 804.463039] scsi host7: usb-storage 4-1:1.0 > [ 804.463043] device: 'host7': device_add > [ 804.463049] bus: 'scsi': add device host7 > [ 804.463077] PM: Adding info for scsi:host7 > [ 804.463083] device: 'host7': device_add > [ 804.463098] PM: Adding info for No Bus:host7 > [ 804.463106] driver: 'usb-storage': driver_bound: bound to device '4-1:1.0' > [ 804.463107] bus: 'usb': really_probe: bound device 4-1:1.0 to > driver usb-storage > [ 804.463109] device: 'ep_81': device_add > [ 804.463117] PM: Adding info for No Bus:ep_81 > [ 804.463119] device: 'ep_02': device_add > [ 804.463126] PM: Adding info for No Bus:ep_02 > [ 804.463128] driver: 'usb': driver_bound: bound to device '4-1' > [ 804.463129] bus: 'usb': really_probe: bound device 4-1 to driver usb > [ 804.463134] device: 'ep_00': device_add > [ 804.463147] PM: Adding info for No Bus:ep_00 > [ 805.473481] scsi 7:0:0:0: Direct-Access Kingston DT Ultimate G2 > PMAP PQ: 0 ANSI: 0 CCS > [ 805.473484] device: 'target7:0:0': device_add > [ 805.473488] bus: 'scsi': add device target7:0:0 > [ 805.473494] PM: Adding info for scsi:target7:0:0 > [ 805.473503] device: '7:0:0:0': device_add > [ 805.473519] bus: 'scsi': add device 7:0:0:0 > [ 805.473524] PM: Adding info for scsi:7:0:0:0 > [ 805.473528] bus: 'scsi': driver_probe_device: matched device > 7:0:0:0 with driver sd > [ 805.473529] bus: 'scsi': really_probe: probing driver sd with device > 7:0:0:0 > [ 805.473531] devices_kset: Moving 7:0:0:0 to end of list > [ 805.473537] device: '7:0:0:0': device_add > [ 805.473549] PM: Adding info for No Bus:7:0:0:0 > [ 805.473555] driver: 'sd': driver_bound: bound to device '7:0:0:0' > [ 805.473556] bus: 'scsi': really_probe: bound device 7:0:0:0 to driver sd > [ 805.473558] device: '7:0:0:0': device_add > [ 805.473580] PM: Adding info for No Bus:7:0:0:0 > [ 805.473593] device: 'sg7': device_add > [ 805.473608] PM: Adding info for No Bus:sg7 > [ 805.473679] sd 7:0:0:0: Attached scsi generic sg7 type 0 > [ 805.473682] device: '7:0:0:0': device_add > [ 805.473690] PM: Adding info for No Bus:7:0:0:0 > [ 805.473936] sd 7:0:0:0: [sdd] 31293440 512-byte logical blocks: > (16.0 GB/14.9 GiB) > [ 805.474070] sd 7:0:0:0: [sdd] Write Protect is off > [ 805.474073] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 > [ 805.474213] sd 7:0:0:0: [sdd] No Caching mode page found > [ 805.474214] sd 7:0:0:0: [sdd] Assuming drive cache: write through > [ 805.474219] device: '8:48': device_add > [ 805.474233] PM: Adding info for No Bus:8:48 > [ 805.474244] device: 'sdd': device_add > [ 805.474258] PM: Adding info for No Bus:sdd > [ 805.770620] sdd: sdd1 > [ 805.770627] device: 'sdd1': device_add > [ 805.770642] PM: Adding info for No Bus:sdd1 > [ 805.771818] sd 7:0:0:0: [sdd] Attached SCSI removable disk > [ 805.811101] DMAR: DRHD: handling fault status reg 2 > [ 805.811108] DMAR: [DMA Read] Request device [07:00.0] fault addr > fff98000 [fault reason 06] PTE Read access is not set > [ 805.811139] xhci_hcd :07:00.0: WARNING: Host System Error > [ 805.848184] xhci_hcd :07:00.0: Host not halted after 16000 > microseconds. > > 2017-02-11 16:32 GMT+03:00 c400 <c400c...@gmail.com>: >> n
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
[ 804.441424] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 804.462165] usb 4-1: New USB device found, idVendor=0951, idProduct=1656 [ 804.462169] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 804.462172] usb 4-1: Product: DT Ultimate G2 [ 804.462174] usb 4-1: Manufacturer: Kingston [ 804.462176] usb 4-1: SerialNumber: 0018F3D97163BB71B1480004 [ 804.462182] device: '4-1': device_add [ 804.462219] bus: 'usb': add device 4-1 [ 804.462226] PM: Adding info for usb:4-1 [ 804.462266] bus: 'usb': driver_probe_device: matched device 4-1 with driver usb [ 804.462267] bus: 'usb': really_probe: probing driver usb with device 4-1 [ 804.462270] devices_kset: Moving 4-1 to end of list [ 804.462652] device: '4-1:1.0': device_add [ 804.462664] bus: 'usb': add device 4-1:1.0 [ 804.462668] PM: Adding info for usb:4-1:1.0 [ 804.462686] bus: 'usb': driver_probe_device: matched device 4-1:1.0 with driver usb-storage [ 804.462688] bus: 'usb': really_probe: probing driver usb-storage with device 4-1:1.0 [ 804.462691] devices_kset: Moving 4-1:1.0 to end of list [ 804.462697] usb-storage 4-1:1.0: USB Mass Storage device detected [ 804.463039] scsi host7: usb-storage 4-1:1.0 [ 804.463043] device: 'host7': device_add [ 804.463049] bus: 'scsi': add device host7 [ 804.463077] PM: Adding info for scsi:host7 [ 804.463083] device: 'host7': device_add [ 804.463098] PM: Adding info for No Bus:host7 [ 804.463106] driver: 'usb-storage': driver_bound: bound to device '4-1:1.0' [ 804.463107] bus: 'usb': really_probe: bound device 4-1:1.0 to driver usb-storage [ 804.463109] device: 'ep_81': device_add [ 804.463117] PM: Adding info for No Bus:ep_81 [ 804.463119] device: 'ep_02': device_add [ 804.463126] PM: Adding info for No Bus:ep_02 [ 804.463128] driver: 'usb': driver_bound: bound to device '4-1' [ 804.463129] bus: 'usb': really_probe: bound device 4-1 to driver usb [ 804.463134] device: 'ep_00': device_add [ 804.463147] PM: Adding info for No Bus:ep_00 [ 805.473481] scsi 7:0:0:0: Direct-Access Kingston DT Ultimate G2 PMAP PQ: 0 ANSI: 0 CCS [ 805.473484] device: 'target7:0:0': device_add [ 805.473488] bus: 'scsi': add device target7:0:0 [ 805.473494] PM: Adding info for scsi:target7:0:0 [ 805.473503] device: '7:0:0:0': device_add [ 805.473519] bus: 'scsi': add device 7:0:0:0 [ 805.473524] PM: Adding info for scsi:7:0:0:0 [ 805.473528] bus: 'scsi': driver_probe_device: matched device 7:0:0:0 with driver sd [ 805.473529] bus: 'scsi': really_probe: probing driver sd with device 7:0:0:0 [ 805.473531] devices_kset: Moving 7:0:0:0 to end of list [ 805.473537] device: '7:0:0:0': device_add [ 805.473549] PM: Adding info for No Bus:7:0:0:0 [ 805.473555] driver: 'sd': driver_bound: bound to device '7:0:0:0' [ 805.473556] bus: 'scsi': really_probe: bound device 7:0:0:0 to driver sd [ 805.473558] device: '7:0:0:0': device_add [ 805.473580] PM: Adding info for No Bus:7:0:0:0 [ 805.473593] device: 'sg7': device_add [ 805.473608] PM: Adding info for No Bus:sg7 [ 805.473679] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 805.473682] device: '7:0:0:0': device_add [ 805.473690] PM: Adding info for No Bus:7:0:0:0 [ 805.473936] sd 7:0:0:0: [sdd] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 805.474070] sd 7:0:0:0: [sdd] Write Protect is off [ 805.474073] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 805.474213] sd 7:0:0:0: [sdd] No Caching mode page found [ 805.474214] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 805.474219] device: '8:48': device_add [ 805.474233] PM: Adding info for No Bus:8:48 [ 805.474244] device: 'sdd': device_add [ 805.474258] PM: Adding info for No Bus:sdd [ 805.770620] sdd: sdd1 [ 805.770627] device: 'sdd1': device_add [ 805.770642] PM: Adding info for No Bus:sdd1 [ 805.771818] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 805.811101] DMAR: DRHD: handling fault status reg 2 [ 805.811108] DMAR: [DMA Read] Request device [07:00.0] fault addr fff98000 [fault reason 06] PTE Read access is not set [ 805.811139] xhci_hcd :07:00.0: WARNING: Host System Error [ 805.848184] xhci_hcd :07:00.0: Host not halted after 16000 microseconds. 2017-02-11 16:32 GMT+03:00 c400 <c400c...@gmail.com>: > no, i`ve already tested and wrote about useless experiments > https://www.mail-archive.com/linux-usb@vger.kernel.org/msg80329.html > > 2017-02-11 0:45 GMT+03:00 c400 <c400c...@gmail.com>: >> sorry, got the letter branch cleaned, so haven`t seen your reply >> >> tested on 4.9.9 kernel >> >> [13964.125187] sd 7:0:0:0: [sdc] Attached SCSI removable disk >> [13964.150525] DMAR: DRHD: handling fault status reg 2 >> [13964.150532] DMAR: [DMA Read] Request device [02:00.0] fault addr >> fffb1000 [fault reason 06] PTE Read access is not set >> [13995.848713] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd >> [14001.072566] usb 4
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
no, i`ve already tested and wrote about useless experiments https://www.mail-archive.com/linux-usb@vger.kernel.org/msg80329.html 2017-02-11 0:45 GMT+03:00 c400 <c400c...@gmail.com>: > sorry, got the letter branch cleaned, so haven`t seen your reply > > tested on 4.9.9 kernel > > [13964.125187] sd 7:0:0:0: [sdc] Attached SCSI removable disk > [13964.150525] DMAR: DRHD: handling fault status reg 2 > [13964.150532] DMAR: [DMA Read] Request device [02:00.0] fault addr > fffb1000 [fault reason 06] PTE Read access is not set > [13995.848713] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14001.072566] usb 4-2: device descriptor read/8, error -110 > [14001.179732] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14006.448780] usb 4-2: device descriptor read/8, error -110 > [14006.760494] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14011.824973] usb 4-2: device descriptor read/8, error -110 > [14011.932178] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14017.201216] usb 4-2: device descriptor read/8, error -110 > [14017.480842] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14022.577498] usb 4-2: device descriptor read/8, error -110 > [14022.684584] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14027.953593] usb 4-2: device descriptor read/8, error -110 > [14028.457289] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14033.585880] usb 4-2: device descriptor read/8, error -110 > [14033.693042] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd > [14038.962098] usb 4-2: device descriptor read/8, error -110 > [14039.125361] usb 4-2: USB disconnect, device number 2 > [14039.125363] device: 'ep_81': device_unregister > [14039.125376] PM: Removing info for No Bus:ep_81 > [14039.125380] device: 'ep_02': device_unregister > [14039.125387] PM: Removing info for No Bus:ep_02 > [14039.125396] bus: 'usb': remove device 4-2:1.0 > [14039.125402] device: '7:0:0:0': device_unregister > [14039.125530] PM: Removing info for No Bus:7:0:0:0 > [14039.125543] device: '7:0:0:0': device_create_release > [14039.125544] device: '7:0:0:0': device_unregister > [14039.125554] device: 'sg6': device_unregister > [14039.125600] PM: Removing info for No Bus:sg6 > [14039.125609] device: 'sg6': device_create_release > [14039.125614] PM: Removing info for No Bus:7:0:0:0 > [14039.125643] bus: 'scsi': remove device 7:0:0:0 > [14039.125659] PM: Removing info for No Bus:7:0:0:0 > [14039.141263] sd 7:0:0:0: [sdc] tag#0 FAILED Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK > [14039.141266] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 01 dd 7d 00 > 00 00 20 00 > [14039.141267] blk_update_request: I/O error, dev sdc, sector 31292672 > [14039.141293] sd 7:0:0:0: [sdc] tag#0 FAILED Result: > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK > [14039.141295] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 01 dd 7d 28 > 00 00 30 00 > [14039.141296] blk_update_request: I/O error, dev sdc, sector 31292712 > [14039.141471] PM: Removing info for No Bus:sdc1 > [14039.141887] PM: Removing info for No Bus:sdc > [14039.141901] PM: Removing info for scsi:7:0:0:0 > [14039.169409] device: '8:32': device_unregister > [14039.169433] PM: Removing info for No Bus:8:32 > [14039.169456] device: '8:32': device_create_release > [14039.169480] bus: 'scsi': remove device target7:0:0 > [14039.169481] PM: Removing info for scsi:target7:0:0 > [14039.237389] device: 'host7': device_unregister > [14039.237419] PM: Removing info for No Bus:host7 > [14039.237435] bus: 'scsi': remove device host7 > [14039.237436] PM: Removing info for scsi:host7 > [14039.237557] PM: Removing info for usb:4-2:1.0 > [14039.237574] device: 'ep_00': device_unregister > [14039.237584] PM: Removing info for No Bus:ep_00 > [14039.237664] bus: 'usb': remove device 4-2 > [14039.237681] PM: Removing info for usb:4-2 > [14039.357502] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd > [14044.594310] usb 4-2: device descriptor read/8, error -110 > [14044.701462] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd > [14049.970453] usb 4-2: device descriptor read/8, error -110 > [14050.225967] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd > [14055.346768] usb 4-2: device descriptor read/8, error -110 > [14055.453926] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd > [14060.722987] usb 4-2: device descriptor read/8, error -110 > [14061.038377] usb 4-2: new SuperSpeed USB device number 5 using xhci_hcd > [14066.099154] usb 4-2: device descriptor read/8, error -110 > [14066.206302] usb 4-2: new SuperSpeed USB device number 5 using xhci_hcd > [14071.475416] usb 4-2: device descriptor read/8, error -110 > [14071.730
VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
sorry, got the letter branch cleaned, so haven`t seen your reply tested on 4.9.9 kernel [13964.125187] sd 7:0:0:0: [sdc] Attached SCSI removable disk [13964.150525] DMAR: DRHD: handling fault status reg 2 [13964.150532] DMAR: [DMA Read] Request device [02:00.0] fault addr fffb1000 [fault reason 06] PTE Read access is not set [13995.848713] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14001.072566] usb 4-2: device descriptor read/8, error -110 [14001.179732] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14006.448780] usb 4-2: device descriptor read/8, error -110 [14006.760494] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14011.824973] usb 4-2: device descriptor read/8, error -110 [14011.932178] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14017.201216] usb 4-2: device descriptor read/8, error -110 [14017.480842] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14022.577498] usb 4-2: device descriptor read/8, error -110 [14022.684584] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14027.953593] usb 4-2: device descriptor read/8, error -110 [14028.457289] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14033.585880] usb 4-2: device descriptor read/8, error -110 [14033.693042] usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd [14038.962098] usb 4-2: device descriptor read/8, error -110 [14039.125361] usb 4-2: USB disconnect, device number 2 [14039.125363] device: 'ep_81': device_unregister [14039.125376] PM: Removing info for No Bus:ep_81 [14039.125380] device: 'ep_02': device_unregister [14039.125387] PM: Removing info for No Bus:ep_02 [14039.125396] bus: 'usb': remove device 4-2:1.0 [14039.125402] device: '7:0:0:0': device_unregister [14039.125530] PM: Removing info for No Bus:7:0:0:0 [14039.125543] device: '7:0:0:0': device_create_release [14039.125544] device: '7:0:0:0': device_unregister [14039.125554] device: 'sg6': device_unregister [14039.125600] PM: Removing info for No Bus:sg6 [14039.125609] device: 'sg6': device_create_release [14039.125614] PM: Removing info for No Bus:7:0:0:0 [14039.125643] bus: 'scsi': remove device 7:0:0:0 [14039.125659] PM: Removing info for No Bus:7:0:0:0 [14039.141263] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [14039.141266] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 01 dd 7d 00 00 00 20 00 [14039.141267] blk_update_request: I/O error, dev sdc, sector 31292672 [14039.141293] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [14039.141295] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 01 dd 7d 28 00 00 30 00 [14039.141296] blk_update_request: I/O error, dev sdc, sector 31292712 [14039.141471] PM: Removing info for No Bus:sdc1 [14039.141887] PM: Removing info for No Bus:sdc [14039.141901] PM: Removing info for scsi:7:0:0:0 [14039.169409] device: '8:32': device_unregister [14039.169433] PM: Removing info for No Bus:8:32 [14039.169456] device: '8:32': device_create_release [14039.169480] bus: 'scsi': remove device target7:0:0 [14039.169481] PM: Removing info for scsi:target7:0:0 [14039.237389] device: 'host7': device_unregister [14039.237419] PM: Removing info for No Bus:host7 [14039.237435] bus: 'scsi': remove device host7 [14039.237436] PM: Removing info for scsi:host7 [14039.237557] PM: Removing info for usb:4-2:1.0 [14039.237574] device: 'ep_00': device_unregister [14039.237584] PM: Removing info for No Bus:ep_00 [14039.237664] bus: 'usb': remove device 4-2 [14039.237681] PM: Removing info for usb:4-2 [14039.357502] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [14044.594310] usb 4-2: device descriptor read/8, error -110 [14044.701462] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [14049.970453] usb 4-2: device descriptor read/8, error -110 [14050.225967] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd [14055.346768] usb 4-2: device descriptor read/8, error -110 [14055.453926] usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd [14060.722987] usb 4-2: device descriptor read/8, error -110 [14061.038377] usb 4-2: new SuperSpeed USB device number 5 using xhci_hcd [14066.099154] usb 4-2: device descriptor read/8, error -110 [14066.206302] usb 4-2: new SuperSpeed USB device number 5 using xhci_hcd [14071.475416] usb 4-2: device descriptor read/8, error -110 [14071.730816] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd [14076.851671] usb 4-2: device descriptor read/8, error -110 [14076.958765] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd [14082.227800] usb 4-2: device descriptor read/8, error -110 [14082.362951] usb usb4-port2: unable to enumerate USB device [14082.363062] xhci_hcd :02:00.0: Stop endpoint command completion for disabled slot 2 any suggestions? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
tested this controller on the this and other PC with linux x86_32 and windows, everything works ok btw i have 2 similar controllers and the same problems 2017-01-14 16:53 GMT+03:00 c400 <c400c...@gmail.com>: > a262eb551300 320471228 S Ci:4:001:0 s a3 00 0001 0004 4 < > a262eb551300 320471237 C Ci:4:001:0 0 4 = 03020100 > a262eb551300 320471240 S Co:4:001:0 s 23 01 0010 0001 0 > a262eb551300 320471242 C Co:4:001:0 0 0 > a262eb551300 320471244 S Ci:4:001:0 s a3 00 0002 0004 4 < > a262eb551300 320471245 C Ci:4:001:0 0 4 = a002 > a262eb551300 320471246 S Ci:4:001:0 s a3 00 0003 0004 4 < > a262eb551300 320471247 C Ci:4:001:0 0 4 = a002 > a262eb551300 320471248 S Ci:4:001:0 s a3 00 0004 0004 4 < > a262eb551300 320471250 C Ci:4:001:0 0 4 = a002 > a2633302f840 320576056 S Ii:4:001:1 -115:2048 4 < > a262eb5513c0 320576079 S Ci:4:001:0 s a3 00 0001 0004 4 < > a262eb5513c0 320576084 C Ci:4:001:0 0 4 = 0302 > a262eb5513c0 320576147 S Ci:4:001:0 s a3 00 0001 0004 4 < > a262eb5513c0 320576152 C Ci:4:001:0 0 4 = 0302 > a262eb5513c0 320576154 S Co:4:001:0 s 23 03 0004 0001 0 > a262eb5513c0 320576157 C Co:4:001:0 0 0 > a262eb5513c0 320636053 S Ci:4:001:0 s a3 00 0001 0004 4 < > a262eb5513c0 320636071 C Ci:4:001:0 0 4 = 03021000 > a262eb5513c0 320636074 S Co:4:001:0 s 23 01 0014 0001 0 > a262eb5513c0 320636076 C Co:4:001:0 0 0 > a262eb5513c0 320636077 S Co:4:001:0 s 23 01 001d 0001 0 > a262eb5513c0 320636079 C Co:4:001:0 0 0 > a262eb5513c0 320636080 S Co:4:001:0 s 23 01 0019 0001 0 > a262eb5513c0 320636082 C Co:4:001:0 0 0 > a262eb5513c0 320636083 S Co:4:001:0 s 23 01 0010 0001 0 > a262eb5513c0 320636085 C Co:4:001:0 0 0 > a262eb5513c0 320636085 S Ci:4:001:0 s a3 00 0001 0004 4 < > a262eb5513c0 320636087 C Ci:4:001:0 0 4 = 0302 > a262eb5513c0 320716069 S Ci:4:002:0 s 80 06 0100 0008 8 < > a262eb5513c0 320716157 C Ci:4:002:0 0 8 = 12010003 0009 > a262eb5513c0 320716178 S Ci:4:002:0 s 80 06 0100 0012 18 < > a262eb5513c0 320716228 C Ci:4:002:0 0 18 = 12010003 0009 > 51095616 10010102 0301 > a262eb5513c0 320716250 S Ci:4:002:0 s 80 06 0f00 0005 5 < > a262eb5513c0 320716304 C Ci:4:002:0 0 5 = 050f1600 02 > a262eb5513c0 320716324 S Ci:4:002:0 s 80 06 0f00 0016 22 < > a262eb5513c0 320716381 C Ci:4:002:0 0 22 = 050f1600 02071002 > 0200 0a100300 0e00020a ff07 > a262eb5513c0 320716405 S Ci:4:002:0 s 80 06 0200 0009 9 < > a262eb5513c0 320716455 C Ci:4:002:0 0 9 = 09022c00 01010080 70 > a262eb5513c0 320716476 S Ci:4:002:0 s 80 06 0200 002c 44 < > a262eb5513c0 320716532 C Ci:4:002:0 0 44 = 09022c00 01010080 > 70090400 00020806 5705 81020004 0006300e 0007 > a262eb551480 320716555 S Ci:4:002:0 s 80 06 0300 00ff 255 < > a262eb551480 320716621 C Ci:4:002:0 0 4 = 04030904 > a262eb551480 320716630 S Ci:4:002:0 s 80 06 0302 0409 00ff 255 < > a262eb551480 320716669 C Ci:4:002:0 0 30 = 1e034400 54002000 > 55006c00 74006900 6d006100 74006500 20004700 3200 > a262eb551480 320716693 S Ci:4:002:0 s 80 06 0301 0409 00ff 255 < > a262eb551480 320716767 C Ci:4:002:0 0 18 = 12034b00 69006e00 > 67007300 74006f00 6e00 > a262eb551480 320716791 S Ci:4:002:0 s 80 06 0303 0409 00ff 255 < > a262eb551480 320716826 C Ci:4:002:0 0 50 = 32033000 30003100 > 38004600 33004400 39003700 31003600 33004200 42003700 > a262eb551540 320717121 S Co:4:002:0 s 00 09 0001 0 > a262eb551540 320717156 C Co:4:002:0 0 0 > a262eb5516c0 321724063 S Ci:4:002:0 s a1 fe 0001 1 < > a262eb5516c0 321724113 C Ci:4:002:0 0 1 = 00 > a262eb5516c0 321724426 S Bo:4:002:2 -115 31 = 55534243 0100 > 2400 8612 0024 00 > a262eb5516c0 321724447 C Bo:4:002:2 0 31 > > a262eb551cc0 321724453 S Bi:4:002:1 -115 36 < > a262eb551cc0 321724488 C Bi:4:002:1 0 36 = 0081 1f00 > 4b696e67 73746f6e 44542055 6c74696d 61746520 47322020 > a262eb5516c0 321724496 S Bi:4:002:1 -115 13 < > a262eb5516c0 321724534 C Bi:4:002:1 0 13 = 55534253 0100 00 > a262eb5516c0 321724682 S Bo:4:002:2 -115 31 = 55534243 0200 > 0600 00 > a262eb5516c0 321724792 C Bo:4:002:2 0 31 > > a262eb5516c0 321724862 S Bi:4:002:1 -115 13 < > a262eb5516c0 321724907 C Bi:4:002:1 0 13 = 55534253 0200 00 > a262eb5516c0 321724991 S Bo:4:002:2 -115 31 = 55534243 0300 > 0800 8a25
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
a262eb551300 320471228 S Ci:4:001:0 s a3 00 0001 0004 4 < a262eb551300 320471237 C Ci:4:001:0 0 4 = 03020100 a262eb551300 320471240 S Co:4:001:0 s 23 01 0010 0001 0 a262eb551300 320471242 C Co:4:001:0 0 0 a262eb551300 320471244 S Ci:4:001:0 s a3 00 0002 0004 4 < a262eb551300 320471245 C Ci:4:001:0 0 4 = a002 a262eb551300 320471246 S Ci:4:001:0 s a3 00 0003 0004 4 < a262eb551300 320471247 C Ci:4:001:0 0 4 = a002 a262eb551300 320471248 S Ci:4:001:0 s a3 00 0004 0004 4 < a262eb551300 320471250 C Ci:4:001:0 0 4 = a002 a2633302f840 320576056 S Ii:4:001:1 -115:2048 4 < a262eb5513c0 320576079 S Ci:4:001:0 s a3 00 0001 0004 4 < a262eb5513c0 320576084 C Ci:4:001:0 0 4 = 0302 a262eb5513c0 320576147 S Ci:4:001:0 s a3 00 0001 0004 4 < a262eb5513c0 320576152 C Ci:4:001:0 0 4 = 0302 a262eb5513c0 320576154 S Co:4:001:0 s 23 03 0004 0001 0 a262eb5513c0 320576157 C Co:4:001:0 0 0 a262eb5513c0 320636053 S Ci:4:001:0 s a3 00 0001 0004 4 < a262eb5513c0 320636071 C Ci:4:001:0 0 4 = 03021000 a262eb5513c0 320636074 S Co:4:001:0 s 23 01 0014 0001 0 a262eb5513c0 320636076 C Co:4:001:0 0 0 a262eb5513c0 320636077 S Co:4:001:0 s 23 01 001d 0001 0 a262eb5513c0 320636079 C Co:4:001:0 0 0 a262eb5513c0 320636080 S Co:4:001:0 s 23 01 0019 0001 0 a262eb5513c0 320636082 C Co:4:001:0 0 0 a262eb5513c0 320636083 S Co:4:001:0 s 23 01 0010 0001 0 a262eb5513c0 320636085 C Co:4:001:0 0 0 a262eb5513c0 320636085 S Ci:4:001:0 s a3 00 0001 0004 4 < a262eb5513c0 320636087 C Ci:4:001:0 0 4 = 0302 a262eb5513c0 320716069 S Ci:4:002:0 s 80 06 0100 0008 8 < a262eb5513c0 320716157 C Ci:4:002:0 0 8 = 12010003 0009 a262eb5513c0 320716178 S Ci:4:002:0 s 80 06 0100 0012 18 < a262eb5513c0 320716228 C Ci:4:002:0 0 18 = 12010003 0009 51095616 10010102 0301 a262eb5513c0 320716250 S Ci:4:002:0 s 80 06 0f00 0005 5 < a262eb5513c0 320716304 C Ci:4:002:0 0 5 = 050f1600 02 a262eb5513c0 320716324 S Ci:4:002:0 s 80 06 0f00 0016 22 < a262eb5513c0 320716381 C Ci:4:002:0 0 22 = 050f1600 02071002 0200 0a100300 0e00020a ff07 a262eb5513c0 320716405 S Ci:4:002:0 s 80 06 0200 0009 9 < a262eb5513c0 320716455 C Ci:4:002:0 0 9 = 09022c00 01010080 70 a262eb5513c0 320716476 S Ci:4:002:0 s 80 06 0200 002c 44 < a262eb5513c0 320716532 C Ci:4:002:0 0 44 = 09022c00 01010080 70090400 00020806 5705 81020004 0006300e 0007 a262eb551480 320716555 S Ci:4:002:0 s 80 06 0300 00ff 255 < a262eb551480 320716621 C Ci:4:002:0 0 4 = 04030904 a262eb551480 320716630 S Ci:4:002:0 s 80 06 0302 0409 00ff 255 < a262eb551480 320716669 C Ci:4:002:0 0 30 = 1e034400 54002000 55006c00 74006900 6d006100 74006500 20004700 3200 a262eb551480 320716693 S Ci:4:002:0 s 80 06 0301 0409 00ff 255 < a262eb551480 320716767 C Ci:4:002:0 0 18 = 12034b00 69006e00 67007300 74006f00 6e00 a262eb551480 320716791 S Ci:4:002:0 s 80 06 0303 0409 00ff 255 < a262eb551480 320716826 C Ci:4:002:0 0 50 = 32033000 30003100 38004600 33004400 39003700 31003600 33004200 42003700 a262eb551540 320717121 S Co:4:002:0 s 00 09 0001 0 a262eb551540 320717156 C Co:4:002:0 0 0 a262eb5516c0 321724063 S Ci:4:002:0 s a1 fe 0001 1 < a262eb5516c0 321724113 C Ci:4:002:0 0 1 = 00 a262eb5516c0 321724426 S Bo:4:002:2 -115 31 = 55534243 0100 2400 8612 0024 00 a262eb5516c0 321724447 C Bo:4:002:2 0 31 > a262eb551cc0 321724453 S Bi:4:002:1 -115 36 < a262eb551cc0 321724488 C Bi:4:002:1 0 36 = 0081 1f00 4b696e67 73746f6e 44542055 6c74696d 61746520 47322020 a262eb5516c0 321724496 S Bi:4:002:1 -115 13 < a262eb5516c0 321724534 C Bi:4:002:1 0 13 = 55534253 0100 00 a262eb5516c0 321724682 S Bo:4:002:2 -115 31 = 55534243 0200 0600 00 a262eb5516c0 321724792 C Bo:4:002:2 0 31 > a262eb5516c0 321724862 S Bi:4:002:1 -115 13 < a262eb5516c0 321724907 C Bi:4:002:1 0 13 = 55534253 0200 00 a262eb5516c0 321724991 S Bo:4:002:2 -115 31 = 55534243 0300 0800 8a25 00 a262eb5516c0 321725003 C Bo:4:002:2 0 31 > a26333ac69c0 321725011 S Bi:4:002:1 -115 8 < a26333ac69c0 321725050 C Bi:4:002:1 0 8 = 01dd7fff 0200 a262eb5516c0 321725079 S Bi:4:002:1 -115 13 < a262eb5516c0 321725092 C Bi:4:002:1 0 13 = 55534253 0300 00 a262eb5516c0 321725154 S Bo:4:002:2 -115 31 = 55534243 0400 c000 861a 003f00c0 00 a262eb5516c0 321725167 C Bo:4:002:2 0 31 > a26333a3df00 321725175 S Bi:4:002:1 -115 192 < a26333a3df00 321725214 C Bi:4:002:1 -121 36 = 2300 051ef000 0200 a262eb5516c0 321725262 S
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
kernel 4.9.3 still not working latest log: [ 196.984424] sd 7:0:0:0: [sdc] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 196.984564] sd 7:0:0:0: [sdc] Write Protect is off [ 196.984566] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 196.984689] sd 7:0:0:0: [sdc] No Caching mode page found [ 196.984690] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 196.984696] device: '8:32': device_add [ 196.984714] PM: Adding info for No Bus:8:32 [ 196.984727] device: 'sdc': device_add [ 196.984747] PM: Adding info for No Bus:sdc [ 197.085658] sdc: sdc1 [ 197.085664] device: 'sdc1': device_add [ 197.085680] PM: Adding info for No Bus:sdc1 [ 197.086929] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 230.955006] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 234.422942] DMAR: DRHD: handling fault status reg 2 [ 234.422946] DMAR: [DMA Read] Request device [02:00.0] fault addr fffbb000 [fault reason 06] PTE Read access is not set [ 234.422950] xhci_hcd :02:00.0: WARNING: Host System Error [ 234.446078] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [ 270.447035] xhci_hcd :02:00.0: xHCI host not responding to stop endpoint command. [ 270.447040] xhci_hcd :02:00.0: Assuming host is dying, halting host. [ 270.470143] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [ 270.470153] xhci_hcd :02:00.0: Non-responsive xHCI host is not halting. [ 270.470154] xhci_hcd :02:00.0: Completing active URBs anyway. [ 270.470161] xhci_hcd :02:00.0: HC died; cleaning up [ 270.470265] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 270.470268] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 22 00 00 0e 00 [ 270.470269] blk_update_request: I/O error, dev sdc, sector 413986 [ 270.538994] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 270.538997] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 23 00 00 0d 00 [ 270.538998] blk_update_request: I/O error, dev sdc, sector 413987 [ 270.986995] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 270.986997] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 22 00 00 01 00 [ 270.986999] blk_update_request: I/O error, dev sdc, sector 413986 [ 270.987063] FAT-fs (sdc1): Directory bread(block 411938) failed [ 271.307002] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 271.307004] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 23 00 00 01 00 [ 271.307005] blk_update_request: I/O error, dev sdc, sector 413987 [ 271.307062] FAT-fs (sdc1): Directory bread(block 411939) failed [ 271.307079] FAT-fs (sdc1): Directory bread(block 411940) failed [ 271.307084] FAT-fs (sdc1): Directory bread(block 411941) failed [ 271.307088] FAT-fs (sdc1): Directory bread(block 411942) failed [ 271.307092] FAT-fs (sdc1): Directory bread(block 411943) failed [ 271.307096] FAT-fs (sdc1): Directory bread(block 411944) failed [ 271.307099] FAT-fs (sdc1): Directory bread(block 411945) failed [ 271.307103] FAT-fs (sdc1): Directory bread(block 411946) failed [ 271.307106] FAT-fs (sdc1): Directory bread(block 411947) failed [ 271.307174] FAT-fs (sdc1): FAT read failed (blocknr 2446) [ 271.307206] FAT-fs (sdc1): FAT read failed (blocknr 2821) [ 271.307229] FAT-fs (sdc1): FAT read failed (blocknr 3093) [ 271.307279] FAT-fs (sdc1): FAT read failed (blocknr 17088) [ 271.307298] FAT-fs (sdc1): FAT read failed (blocknr 17089) [ 271.308434] FAT-fs (sdc1): FAT read failed (blocknr 2241) [ 282.002018] xhci_hcd :02:00.0: Stopped the command ring failed, maybe the host is dead [ 282.025084] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [ 282.025084] xhci_hcd :02:00.0: Abort command ring failed [ 282.025104] xhci_hcd :02:00.0: HC died; cleaning up [ 282.025108] usb 3-1: USB disconnect, device number 2 2017-01-10 13:06 GMT+03:00 c400 <c400c...@gmail.com>: > hi! > Using 4.9.2 kernel. Still no success with VL805 USB 3.0 > i can give a remote shell to test and reproduce the bug > > any help? > > 2016-09-23 0:47 GMT+03:00 c400 <c400c...@gmail.com>: >> btw >> i've tested a liitle better and the disk is visible, but write errors occurs >> after ejecting and inserting it is invisible again >> >> [129416.884960] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: >> (640 GB/596 GiB) >> [129416.885429] sd 7:0:0:0: [sdc] Write Protect is off >> [129416.885434] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 >> [129416.885798] sd 7:0:0:0: [sdc] No Caching mode page found >> [129416.885801] sd 7:0:0:0: [sdc] Assuming drive cache: write through >> [129416.885806] device: '8:32': device_add >> [129416.885820] PM: Adding info for No Bus:8:32 >> [129416.885831] device: 'sdc': device_add >> [1294
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
hi! Using 4.9.2 kernel. Still no success with VL805 USB 3.0 i can give a remote shell to test and reproduce the bug any help? 2016-09-23 0:47 GMT+03:00 c400 <c400c...@gmail.com>: > btw > i've tested a liitle better and the disk is visible, but write errors occurs > after ejecting and inserting it is invisible again > > [129416.884960] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: > (640 GB/596 GiB) > [129416.885429] sd 7:0:0:0: [sdc] Write Protect is off > [129416.885434] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 > [129416.885798] sd 7:0:0:0: [sdc] No Caching mode page found > [129416.885801] sd 7:0:0:0: [sdc] Assuming drive cache: write through > [129416.885806] device: '8:32': device_add > [129416.885820] PM: Adding info for No Bus:8:32 > [129416.885831] device: 'sdc': device_add > [129416.885847] PM: Adding info for No Bus:sdc > [129416.897283] sdc: sdc1 > [129416.897291] device: 'sdc1': device_add > [129416.897309] PM: Adding info for No Bus:sdc1 > [129416.898828] sd 7:0:0:0: [sdc] Attached SCSI disk > [129479.043607] usb 3-1: reset SuperSpeed USB device number 3 using xhci_hcd > [129483.506009] xhci_hcd :02:00.0: WARNING: Host System Error > [129483.529130] xhci_hcd :02:00.0: Host not halted after 16000 > microseconds. > [129483.529146] DMAR: DRHD: handling fault status reg 2 > [129483.529149] DMAR: [DMA Read] Request device [02:00.0] fault addr > ffdf1000 [fault reason 06] PTE Read access is not set > [129518.953695] xhci_hcd :02:00.0: xHCI host not responding to > stop endpoint command. > [129518.953702] xhci_hcd :02:00.0: Assuming host is dying, halting host. > [129518.976675] xhci_hcd :02:00.0: Host not halted after 16000 > microseconds. > [129518.976686] xhci_hcd :02:00.0: Non-responsive xHCI host is not > halting. > [129518.976687] xhci_hcd :02:00.0: Completing active URBs anyway. > [129518.976699] xhci_hcd :02:00.0: HC died; cleaning up > [129519.841735] sd 7:0:0:0: [sdc] tag#0 FAILED Result: > hostbyte=DID_ERROR driverbyte=DRIVER_OK > [129519.841739] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 72 > e0 00 08 00 00 > [129519.841741] blk_update_request: I/O error, dev sdc, sector 5993184 > [129519.841743] Buffer I/O error on dev sdc1, logical block 5991136, > lost async page write > [129519.841745] Buffer I/O error on dev sdc1, logical block 5991137, > lost async page write > [129519.841747] Buffer I/O error on dev sdc1, logical block 5991138, > lost async page write > [129519.841748] Buffer I/O error on dev sdc1, logical block 5991139, > lost async page write > [129519.841749] Buffer I/O error on dev sdc1, logical block 5991140, > lost async page write > [129519.841750] Buffer I/O error on dev sdc1, logical block 5991141, > lost async page write > [129519.841752] Buffer I/O error on dev sdc1, logical block 5991142, > lost async page write > [129519.841753] Buffer I/O error on dev sdc1, logical block 5991143, > lost async page write > [129519.841758] Buffer I/O error on dev sdc1, logical block 5991144, > lost async page write > [129519.841760] Buffer I/O error on dev sdc1, logical block 5991145, > lost async page write > [129520.841755] sd 7:0:0:0: [sdc] tag#0 FAILED Result: > hostbyte=DID_ERROR driverbyte=DRIVER_OK > [129520.841759] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 7a > e0 00 08 00 00 > [129520.841760] blk_update_request: I/O error, dev sdc, sector 5995232 > [129530.516824] xhci_hcd :02:00.0: Stopped the command ring > failed, maybe the host is dead > [129530.540017] xhci_hcd :02:00.0: Host not halted after 16000 > microseconds. > [129530.540021] xhci_hcd :02:00.0: Abort command ring failed > [129530.540023] xhci_hcd :02:00.0: HC died; cleaning up > [129530.540064] usb 2-1: USB disconnect, device number 2 > [129530.540067] device: 'ep_81': device_unregister > [129530.540083] PM: Removing info for No Bus:ep_81 > [129530.540099] bus: 'usb': remove device 2-1:1.0 > [129530.540108] device: '2-1-port4': device_unregister > [129530.540116] PM: Removing info for No Bus:2-1-port4 > > 2016-09-21 18:08 GMT+03:00 c400 <c400c...@gmail.com>: >> 02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host >> Controller (rev 01) (prog-if 30 [XHCI]) >> Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller >> Flags: bus master, fast devsel, latency 0, IRQ 41 >> Memory at fbb0 (64-bit, non-prefetchable) [size=4K] >> Capabilities: [80] Power Management version 3 >> Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ >> Capabilities: [c4] Express Endpoint, MSI 00 >> Kernel driver in use: xhci_hcd >> Kernel modules: xhci_pci -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
btw i've tested a liitle better and the disk is visible, but write errors occurs after ejecting and inserting it is invisible again [129416.884960] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [129416.885429] sd 7:0:0:0: [sdc] Write Protect is off [129416.885434] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [129416.885798] sd 7:0:0:0: [sdc] No Caching mode page found [129416.885801] sd 7:0:0:0: [sdc] Assuming drive cache: write through [129416.885806] device: '8:32': device_add [129416.885820] PM: Adding info for No Bus:8:32 [129416.885831] device: 'sdc': device_add [129416.885847] PM: Adding info for No Bus:sdc [129416.897283] sdc: sdc1 [129416.897291] device: 'sdc1': device_add [129416.897309] PM: Adding info for No Bus:sdc1 [129416.898828] sd 7:0:0:0: [sdc] Attached SCSI disk [129479.043607] usb 3-1: reset SuperSpeed USB device number 3 using xhci_hcd [129483.506009] xhci_hcd :02:00.0: WARNING: Host System Error [129483.529130] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [129483.529146] DMAR: DRHD: handling fault status reg 2 [129483.529149] DMAR: [DMA Read] Request device [02:00.0] fault addr ffdf1000 [fault reason 06] PTE Read access is not set [129518.953695] xhci_hcd :02:00.0: xHCI host not responding to stop endpoint command. [129518.953702] xhci_hcd :02:00.0: Assuming host is dying, halting host. [129518.976675] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [129518.976686] xhci_hcd :02:00.0: Non-responsive xHCI host is not halting. [129518.976687] xhci_hcd :02:00.0: Completing active URBs anyway. [129518.976699] xhci_hcd :02:00.0: HC died; cleaning up [129519.841735] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [129519.841739] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 72 e0 00 08 00 00 [129519.841741] blk_update_request: I/O error, dev sdc, sector 5993184 [129519.841743] Buffer I/O error on dev sdc1, logical block 5991136, lost async page write [129519.841745] Buffer I/O error on dev sdc1, logical block 5991137, lost async page write [129519.841747] Buffer I/O error on dev sdc1, logical block 5991138, lost async page write [129519.841748] Buffer I/O error on dev sdc1, logical block 5991139, lost async page write [129519.841749] Buffer I/O error on dev sdc1, logical block 5991140, lost async page write [129519.841750] Buffer I/O error on dev sdc1, logical block 5991141, lost async page write [129519.841752] Buffer I/O error on dev sdc1, logical block 5991142, lost async page write [129519.841753] Buffer I/O error on dev sdc1, logical block 5991143, lost async page write [129519.841758] Buffer I/O error on dev sdc1, logical block 5991144, lost async page write [129519.841760] Buffer I/O error on dev sdc1, logical block 5991145, lost async page write [129520.841755] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [129520.841759] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 7a e0 00 08 00 00 [129520.841760] blk_update_request: I/O error, dev sdc, sector 5995232 [129530.516824] xhci_hcd :02:00.0: Stopped the command ring failed, maybe the host is dead [129530.540017] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [129530.540021] xhci_hcd :02:00.0: Abort command ring failed [129530.540023] xhci_hcd :02:00.0: HC died; cleaning up [129530.540064] usb 2-1: USB disconnect, device number 2 [129530.540067] device: 'ep_81': device_unregister [129530.540083] PM: Removing info for No Bus:ep_81 [129530.540099] bus: 'usb': remove device 2-1:1.0 [129530.540108] device: '2-1-port4': device_unregister [129530.540116] PM: Removing info for No Bus:2-1-port4 2016-09-21 18:08 GMT+03:00 c400 <c400c...@gmail.com>: > 02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host > Controller (rev 01) (prog-if 30 [XHCI]) > Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller > Flags: bus master, fast devsel, latency 0, IRQ 41 > Memory at fbb0 (64-bit, non-prefetchable) [size=4K] > Capabilities: [80] Power Management version 3 > Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ > Capabilities: [c4] Express Endpoint, MSI 00 > Kernel driver in use: xhci_hcd > Kernel modules: xhci_pci -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller Flags: bus master, fast devsel, latency 0, IRQ 41 Memory at fbb0 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Capabilities: [c4] Express Endpoint, MSI 00 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
roger that i`ll test it and write back after weekends 2016-09-15 17:29 GMT+03:00 c400 <c400c...@gmail.com>: >>Obviously you're not reading my email messages. I told you quite >>clearly: >> >>After unloading the xhci-pci and xhci-hcd modules: >> >>sudo modprobe xhci_hcd quirks=0x00800090 >>sudo modprobe xhci_pci > === > this part of commands from your message were done right as you`ve sent > i thought you`ve seen the result in DMESG (i`ve sent it twice) > i even tried rmmod previously > USB does not work either > > 2016-09-15 0:45 GMT+03:00 c400 <c400c...@gmail.com>: >> XHCI_NO_64BIT_SUPPORT >> can't find such flag in my kernel config. May be you can help me to >> find it in menuconfig tree? >> >> 2016-09-14 23:25 GMT+03:00 c400 <c400c...@gmail.com>: >>> yep! enabling You need to enable CONFIG_DYNAMIC_DEBUG. did the trick! >>> here is my new dmesg output: >>> >>> >>> 2016-09-14 22:39 GMT+03:00 c400 <c400c...@gmail.com>: >>>> 2016-09-14 15:43 GMT+03:00 Oliver Neukum <oneu...@suse.com>: >>>>> On Wed, 2016-09-14 at 15:22 +0300, c400 wrote: >>>>>> may be i can help to test something else? I am ready and have enough >>>>>> free time >>>>> >>>>> You may need to mount debugfs at /sys/kernel/debug >>>>> >>>>> HTH >>>>> Oliver >>>>> >>>>> >>>> mount -t debugfs none /sys/kernel/debug/ >>>> mount: none is already mounted or /sys/kernel/debug busy >>>> >>>> ls /sys/kernel/debug/ >>>> >>>> acpi extfrag mce sleep_time >>>> bcache fault_around_bytes nfsdsuspend_stats >>>> bdi hid pm_qos tracing >>>> boot_params hwpoisonpstate_snb usb >>>> dma_buf intel_powerclampras wakeup_sources >>>> dri kprobes regmap x86 >>>> >>>> 2016-09-14 15:22 GMT+03:00 c400 <c400c...@gmail.com>: >>>>> may be i can help to test something else? I am ready and have enough free >>>>> time >>>>> >>>>> 2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>: >>>>>> [182047.000570] xhci_hcd :02:00.0: remove, state 4 >>>>>> [182047.000577] usb usb4: USB disconnect, device number 1 >>>>>> [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 >>>>>> microseconds. >>>>>> [182047.023982] xhci_hcd :02:00.0: Host controller not halted, >>>>>> aborting reset. >>>>>> [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered >>>>>> [182047.024103] xhci_hcd :02:00.0: remove, state 1 >>>>>> [182047.024108] usb usb3: USB disconnect, device number 1 >>>>>> [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered >>>>>> [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller >>>>>> [182058.617556] xhci_hcd :02:00.0: new USB bus registered, >>>>>> assigned bus number 3 >>>>>> [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 >>>>>> microseconds. >>>>>> [182058.640822] xhci_hcd :02:00.0: can't setup: -110 >>>>>> [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered >>>>>> [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 >>>>>> [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 >>>>>> >>>>>> can not see my flash inserted into the USB >>>>>> >>>>>> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control >>>>>> Do not have such folder >>>>>> (i`ve recompiled my kernel (make defconfig) with some small changes. >>>>>> may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
>Obviously you're not reading my email messages. I told you quite >clearly: > >After unloading the xhci-pci and xhci-hcd modules: > >sudo modprobe xhci_hcd quirks=0x00800090 >sudo modprobe xhci_pci === this part of commands from your message were done right as you`ve sent i thought you`ve seen the result in DMESG (i`ve sent it twice) i even tried rmmod previously USB does not work either 2016-09-15 0:45 GMT+03:00 c400 <c400c...@gmail.com>: > XHCI_NO_64BIT_SUPPORT > can't find such flag in my kernel config. May be you can help me to > find it in menuconfig tree? > > 2016-09-14 23:25 GMT+03:00 c400 <c400c...@gmail.com>: >> yep! enabling You need to enable CONFIG_DYNAMIC_DEBUG. did the trick! >> here is my new dmesg output: >> >> >> 2016-09-14 22:39 GMT+03:00 c400 <c400c...@gmail.com>: >>> 2016-09-14 15:43 GMT+03:00 Oliver Neukum <oneu...@suse.com>: >>>> On Wed, 2016-09-14 at 15:22 +0300, c400 wrote: >>>>> may be i can help to test something else? I am ready and have enough free >>>>> time >>>> >>>> You may need to mount debugfs at /sys/kernel/debug >>>> >>>> HTH >>>> Oliver >>>> >>>> >>> mount -t debugfs none /sys/kernel/debug/ >>> mount: none is already mounted or /sys/kernel/debug busy >>> >>> ls /sys/kernel/debug/ >>> >>> acpi extfrag mce sleep_time >>> bcache fault_around_bytes nfsdsuspend_stats >>> bdi hid pm_qos tracing >>> boot_params hwpoisonpstate_snb usb >>> dma_buf intel_powerclampras wakeup_sources >>> dri kprobes regmap x86 >>> >>> 2016-09-14 15:22 GMT+03:00 c400 <c400c...@gmail.com>: >>>> may be i can help to test something else? I am ready and have enough free >>>> time >>>> >>>> 2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>: >>>>> [182047.000570] xhci_hcd :02:00.0: remove, state 4 >>>>> [182047.000577] usb usb4: USB disconnect, device number 1 >>>>> [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 >>>>> microseconds. >>>>> [182047.023982] xhci_hcd :02:00.0: Host controller not halted, >>>>> aborting reset. >>>>> [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered >>>>> [182047.024103] xhci_hcd :02:00.0: remove, state 1 >>>>> [182047.024108] usb usb3: USB disconnect, device number 1 >>>>> [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered >>>>> [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller >>>>> [182058.617556] xhci_hcd :02:00.0: new USB bus registered, >>>>> assigned bus number 3 >>>>> [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 >>>>> microseconds. >>>>> [182058.640822] xhci_hcd :02:00.0: can't setup: -110 >>>>> [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered >>>>> [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 >>>>> [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 >>>>> >>>>> can not see my flash inserted into the USB >>>>> >>>>> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control >>>>> Do not have such folder >>>>> (i`ve recompiled my kernel (make defconfig) with some small changes. >>>>> may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
XHCI_NO_64BIT_SUPPORT can't find such flag in my kernel config. May be you can help me to find it in menuconfig tree? 2016-09-14 23:25 GMT+03:00 c400 <c400c...@gmail.com>: > yep! enabling You need to enable CONFIG_DYNAMIC_DEBUG. did the trick! > here is my new dmesg output: > > > 2016-09-14 22:39 GMT+03:00 c400 <c400c...@gmail.com>: >> 2016-09-14 15:43 GMT+03:00 Oliver Neukum <oneu...@suse.com>: >>> On Wed, 2016-09-14 at 15:22 +0300, c400 wrote: >>>> may be i can help to test something else? I am ready and have enough free >>>> time >>> >>> You may need to mount debugfs at /sys/kernel/debug >>> >>> HTH >>> Oliver >>> >>> >> mount -t debugfs none /sys/kernel/debug/ >> mount: none is already mounted or /sys/kernel/debug busy >> >> ls /sys/kernel/debug/ >> >> acpi extfrag mce sleep_time >> bcache fault_around_bytes nfsdsuspend_stats >> bdi hid pm_qos tracing >> boot_params hwpoisonpstate_snb usb >> dma_buf intel_powerclampras wakeup_sources >> dri kprobes regmap x86 >> >> 2016-09-14 15:22 GMT+03:00 c400 <c400c...@gmail.com>: >>> may be i can help to test something else? I am ready and have enough free >>> time >>> >>> 2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>: >>>> [182047.000570] xhci_hcd :02:00.0: remove, state 4 >>>> [182047.000577] usb usb4: USB disconnect, device number 1 >>>> [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 >>>> microseconds. >>>> [182047.023982] xhci_hcd :02:00.0: Host controller not halted, >>>> aborting reset. >>>> [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered >>>> [182047.024103] xhci_hcd :02:00.0: remove, state 1 >>>> [182047.024108] usb usb3: USB disconnect, device number 1 >>>> [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered >>>> [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller >>>> [182058.617556] xhci_hcd :02:00.0: new USB bus registered, >>>> assigned bus number 3 >>>> [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 >>>> microseconds. >>>> [182058.640822] xhci_hcd :02:00.0: can't setup: -110 >>>> [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered >>>> [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 >>>> [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 >>>> >>>> can not see my flash inserted into the USB >>>> >>>> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control >>>> Do not have such folder >>>> (i`ve recompiled my kernel (make defconfig) with some small changes. >>>> may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
2016-09-14 15:43 GMT+03:00 Oliver Neukum <oneu...@suse.com>: > On Wed, 2016-09-14 at 15:22 +0300, c400 wrote: >> may be i can help to test something else? I am ready and have enough free >> time > > You may need to mount debugfs at /sys/kernel/debug > > HTH > Oliver > > mount -t debugfs none /sys/kernel/debug/ mount: none is already mounted or /sys/kernel/debug busy ls /sys/kernel/debug/ acpi extfrag mce sleep_time bcache fault_around_bytes nfsdsuspend_stats bdi hid pm_qos tracing boot_params hwpoisonpstate_snb usb dma_buf intel_powerclampras wakeup_sources dri kprobes regmap x86 2016-09-14 15:22 GMT+03:00 c400 <c400c...@gmail.com>: > may be i can help to test something else? I am ready and have enough free time > > 2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>: >> [182047.000570] xhci_hcd :02:00.0: remove, state 4 >> [182047.000577] usb usb4: USB disconnect, device number 1 >> [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 >> microseconds. >> [182047.023982] xhci_hcd :02:00.0: Host controller not halted, >> aborting reset. >> [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered >> [182047.024103] xhci_hcd :02:00.0: remove, state 1 >> [182047.024108] usb usb3: USB disconnect, device number 1 >> [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered >> [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller >> [182058.617556] xhci_hcd :02:00.0: new USB bus registered, >> assigned bus number 3 >> [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 >> microseconds. >> [182058.640822] xhci_hcd :02:00.0: can't setup: -110 >> [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered >> [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 >> [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 >> >> can not see my flash inserted into the USB >> >> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control >> Do not have such folder >> (i`ve recompiled my kernel (make defconfig) with some small changes. >> may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
may be i can help to test something else? I am ready and have enough free time 2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>: > [182047.000570] xhci_hcd :02:00.0: remove, state 4 > [182047.000577] usb usb4: USB disconnect, device number 1 > [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 > microseconds. > [182047.023982] xhci_hcd :02:00.0: Host controller not halted, > aborting reset. > [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered > [182047.024103] xhci_hcd :02:00.0: remove, state 1 > [182047.024108] usb usb3: USB disconnect, device number 1 > [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered > [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller > [182058.617556] xhci_hcd :02:00.0: new USB bus registered, > assigned bus number 3 > [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 > microseconds. > [182058.640822] xhci_hcd :02:00.0: can't setup: -110 > [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered > [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 > [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 > > can not see my flash inserted into the USB > > echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control > Do not have such folder > (i`ve recompiled my kernel (make defconfig) with some small changes. > may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
[182047.000570] xhci_hcd :02:00.0: remove, state 4 [182047.000577] usb usb4: USB disconnect, device number 1 [182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [182047.023982] xhci_hcd :02:00.0: Host controller not halted, aborting reset. [182047.023996] xhci_hcd :02:00.0: USB bus 4 deregistered [182047.024103] xhci_hcd :02:00.0: remove, state 1 [182047.024108] usb usb3: USB disconnect, device number 1 [182047.024320] xhci_hcd :02:00.0: USB bus 3 deregistered [182058.617466] xhci_hcd :02:00.0: xHCI Host Controller [182058.617556] xhci_hcd :02:00.0: new USB bus registered, assigned bus number 3 [182058.640820] xhci_hcd :02:00.0: Host not halted after 16000 microseconds. [182058.640822] xhci_hcd :02:00.0: can't setup: -110 [182058.640824] xhci_hcd :02:00.0: USB bus 3 deregistered [182058.640944] xhci_hcd :02:00.0: init :02:00.0 fail, -110 [182058.640947] xhci_hcd: probe of :02:00.0 failed with error -110 can not see my flash inserted into the USB echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control Do not have such folder (i`ve recompiled my kernel (make defconfig) with some small changes. may be i need to enable something in kernelt? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
my DMESG file [0.00] Linux version 4.7.3-gentoo (root@ss) (gcc version 4.9.3 (Gentoo 4.9.3 p1.5, pie-0.6.4) ) #1 SMP Sat Sep 10 09:38:53 Local time zone must be set--see zic [0.00] Command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-4.7.3-gentoo root=UUID=508392f4-d7fb-4449-88e4-4dcde2de7206 ro [0.00] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [0.00] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [0.00] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [0.00] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [0.00] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [0.00] x86/fpu: Using 'eager' FPU context switches. [0.00] e820: BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009abff] usable [0.00] BIOS-e820: [mem 0x0009ac00-0x0009] reserved [0.00] BIOS-e820: [mem 0x000e-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0x7de7afff] usable [0.00] BIOS-e820: [mem 0x7de7b000-0x7e028fff] reserved [0.00] BIOS-e820: [mem 0x7e029000-0x7e211fff] ACPI NVS [0.00] BIOS-e820: [mem 0x7e212000-0x7f361fff] reserved [0.00] BIOS-e820: [mem 0x7f362000-0x7f7f] ACPI NVS [0.00] BIOS-e820: [mem 0x8000-0x8fff] reserved [0.00] BIOS-e820: [mem 0xfed1c000-0xfed3] reserved [0.00] BIOS-e820: [mem 0xff00-0x] reserved [0.00] BIOS-e820: [mem 0x0001-0x00107fff] usable [0.00] NX (Execute Disable) protection: active [0.00] SMBIOS 2.7 present. [0.00] DMI: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2a 08/31/2015 [0.00] e820: update [mem 0x-0x0fff] usable ==> reserved [0.00] e820: remove [mem 0x000a-0x000f] usable [0.00] e820: last_pfn = 0x108 max_arch_pfn = 0x4 [0.00] MTRR default type: uncachable [0.00] MTRR fixed ranges enabled: [0.00] 0-9 write-back [0.00] A-B uncachable [0.00] C-F write-protect [0.00] MTRR variable ranges enabled: [0.00] 0 base mask 3FF0 write-back [0.00] 1 base 0010 mask 3FFF8000 write-back [0.00] 2 base 8000 mask 3FFF8000 uncachable [0.00] 3 disabled [0.00] 4 disabled [0.00] 5 disabled [0.00] 6 disabled [0.00] 7 disabled [0.00] 8 disabled [0.00] 9 disabled [0.00] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [0.00] e820: update [mem 0x8000-0x] usable ==> reserved [0.00] e820: last_pfn = 0x7de7b max_arch_pfn = 0x4 [0.00] found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] mapped at [880fd8f0] [0.00] Base memory trampoline at [88094000] 94000 size 24576 [0.00] Using GB pages for direct mapping [0.00] BRK [0x0202b000, 0x0202bfff] PGTABLE [0.00] BRK [0x0202c000, 0x0202cfff] PGTABLE [0.00] BRK [0x0202d000, 0x0202dfff] PGTABLE [0.00] RAMDISK: [mem 0x34134000-0x36091fff] [0.00] ACPI: Early table checksum verification disabled [0.00] ACPI: RSDP 0x000F04A0 24 (v02 SUPERM) [0.00] ACPI: XSDT 0x7E135088 8C (v01 SUPERM SMCI--MB 0001 AMI 00010013) [0.00] ACPI: FACP 0x7E13FD90 F4 (v04 SUPERM SMCI--MB 0001 AMI 00010013) [0.00] ACPI: DSDT 0x7E1351A8 00ABE6 (v02 SUPERM SMCI--MB INTL 20091112) [0.00] ACPI: FACS 0x7E209080 40 [0.00] ACPI: APIC 0x7E13FE88 000100 (v03 0001 AMI 00010013) [0.00] ACPI: FPDT 0x7E13FF88 44 (v01 0001 AMI 00010013) [0.00] ACPI: HPET 0x7E13FFD0 38 (v01 SUPERM SMCI--MB 0001 AMI. 0005) [0.00] ACPI: PRAD 0x7E140008 BE (v02 PRADID PRADTID 0001 MSFT 0400) [0.00] ACPI: SPMI 0x7E1400C8 40 (v05 A M I OEMSPMI AMI. ) [0.00] ACPI: SSDT 0x7E140108 0C7AE8 (v02 INTEL CpuPm 4000 INTL 20091112) [0.00] ACPI: EINJ 0x7E207BF0 000130 (v01 AMIAMI EINJ ) [0.00] ACPI: ERST 0x7E207D20 000230 (v01 AMIER AMI ERST ) [0.00] ACPI: HEST 0x7E207F50 A8 (v01 AMIAMI HEST ) [0.00] ACPI: BERT 0x7E207FF8 30 (v01 AMIAMI BERT ) [0.00] ACPI: DMAR 0x7E208028
VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)
i`ve got two PCI-E USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) The problem is that both of them works on ASUS P8H61-MX R 2.0 with x86 and x86_64 kernels but on my Supermicro X9SRI-F both of them works only on x86 kernel. Tried with vanilla gentoo install and manual kernel configuration and with: admincd-amd64-20160908.iso admincd-x86-20160906.iso tried with defconfig + xhci also help please. I can do a step by step testing if it is needed .config Description: Binary data
