Re: [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
On 04/22/2014 04:19 PM, Ezequiel Garcia wrote: The DMA controller is needed for the USB controller to be correctly registered. Therefore, if the DMA node is located at the end an unecessary probe deferral is produced systematically. This is easily fixed by moving the node at the beggining of the child list, so it's probed first. So you do not change anything except for the order of child nodes. So this should be fine and without a compatibility problem. I added them according to the memory offset so you might want to add a comment why you moved this because Mr. Structured Organized might noticed this one day and move it back. Signed-off-by: Ezequiel Garcia ezequ...@vanguardiasur.com.ar --- Felipe, Sebastian: I cannot see why the cppi41dma node must be placed inside the ti,am33xx-usb compatible node. Tried to move it out so it's probed just like the edma engine, but the USB doesn't work properly in that case. Can you enlighten me? So If I remember correctly it was a big bag of crap. If you look at the parent node, you notice that it has a ti,hwmods member while the other do not have such a property. According to the manual only the whole IP block as-it has this. It has to be activated if you use one of those devices this includes the two USB-IP cores and the DMA-IP core. I didn't manage to come up with something else except to make one parent node which creates the childs to have a proper relation here. There was also something with parent - child relation in the way musb expected it. I think this was only glue code + musb child node and had nothing to do with the DMA engine. But I am not 100% sure… In any case, this change is good enough to remove the deferral probe. Sebastian -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
On Apr 23, Sebastian Andrzej Siewior wrote: On 04/22/2014 04:19 PM, Ezequiel Garcia wrote: The DMA controller is needed for the USB controller to be correctly registered. Therefore, if the DMA node is located at the end an unecessary probe deferral is produced systematically. This is easily fixed by moving the node at the beggining of the child list, so it's probed first. So you do not change anything except for the order of child nodes. So this should be fine and without a compatibility problem. I added them according to the memory offset so you might want to add a comment why you moved this because Mr. Structured Organized might noticed this one day and move it back. Yes, good catch. I'll prepare a v2. Signed-off-by: Ezequiel Garcia ezequ...@vanguardiasur.com.ar --- Felipe, Sebastian: I cannot see why the cppi41dma node must be placed inside the ti,am33xx-usb compatible node. Tried to move it out so it's probed just like the edma engine, but the USB doesn't work properly in that case. Can you enlighten me? So If I remember correctly it was a big bag of crap. If you look at the parent node, you notice that it has a ti,hwmods member while the other do not have such a property. According to the manual only the whole IP block as-it has this. It has to be activated if you use one of those devices this includes the two USB-IP cores and the DMA-IP core. I didn't manage to come up with something else except to make one parent node which creates the childs to have a proper relation here. Ah, this could be... There was also something with parent - child relation in the way musb expected it. I think this was only glue code + musb child node and had nothing to do with the DMA engine. But I am not 100% sure… Well, from my poor and unexperienced code inspection, I could not see anything relating the parent of the DMA controller node to the node itself, and so that's why it seemed possible to move it out. Once the dma-controller is moved out of the USB devicetree node block, the dmaengine driver is registered correctly (apparently), and so does the USB driver. However, upon connection of some USB storage device, detection begins but then things don't go well, although I don't have the exact error here, I remember this warning was hitted on dma/cppi41.c at line 602: WARN_ON(!c-td_retry); Just in case someone want to debug this further. Thanks a lot for the feedback! -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com -- To unsubscribe from this list: send the line unsubscribe linux-usb in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
The DMA controller is needed for the USB controller to be correctly
registered. Therefore, if the DMA node is located at the end an unecessary
probe deferral is produced systematically.
This is easily fixed by moving the node at the beggining of the child list,
so it's probed first.
Signed-off-by: Ezequiel Garcia ezequ...@vanguardiasur.com.ar
---
Felipe, Sebastian:
I cannot see why the cppi41dma node must be placed inside the
ti,am33xx-usb compatible node. Tried to move it out
so it's probed just like the edma engine, but the USB doesn't work
properly in that case.
Can you enlighten me?
In any case, this change is good enough to remove the deferral probe.
Thanks!
arch/arm/boot/dts/am33xx.dtsi | 29 +++--
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9770e35..c673be4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -453,6 +453,21 @@
ti,hwmods = usb_otg_hs;
status = disabled;
+ cppi41dma: dma-controller@47402000 {
+ compatible = ti,am3359-cppi41;
+ reg = 0x4740 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000;
+ reg-names = glue, controller, scheduler,
queuemgr;
+ interrupts = 17;
+ interrupt-names = glue;
+ #dma-cells = 2;
+ #dma-channels = 30;
+ #dma-requests = 256;
+ status = disabled;
+ };
+
usb_ctrl_mod: control@44e10620 {
compatible = ti,am335x-usb-ctrl-module;
reg = 0x44e10620 0x10
@@ -556,20 +571,6 @@
tx14, tx15;
};
- cppi41dma: dma-controller@47402000 {
- compatible = ti,am3359-cppi41;
- reg = 0x4740 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000;
- reg-names = glue, controller, scheduler,
queuemgr;
- interrupts = 17;
- interrupt-names = glue;
- #dma-cells = 2;
- #dma-channels = 30;
- #dma-requests = 256;
- status = disabled;
- };
};
epwmss0: epwmss@4830 {
--
1.9.1
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
