Suspend scenario in case of ohci-s3c2410 glue was not
properly handled as it was not suspending generic part
of ohci controller. Calling explicitly the ohci_suspend()
routine in ohci_hcd_s3c2410_drv_suspend() will ensure
proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar <manjunath.gou...@linaro.org>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Alan Stern <st...@rowland.harvard.edu>
Cc: Greg KH <g...@kroah.com>
Cc: linux-usb@vger.kernel.org
V2:
-Incase ohci_suspend() fails, return right away without
executing further.
V3:
-rid of unwanted code from ohci_hcd_s3c2410_drv_suspend()
which already ohci_suspend() does it.
---
drivers/usb/host/ohci-s3c2410.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 8018bb1..70a7ca1 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -428,26 +428,15 @@ static int ohci_hcd_s3c2410_drv_suspend(struct device
*dev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct platform_device *pdev = to_platform_device(dev);
+ bool do_wakeup = device_may_wakeup(dev);
unsigned long flags;
int rc = 0;
- /*
- * Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- */
- spin_lock_irqsave(&ohci->lock, flags);
- if (ohci->rh_state != OHCI_RH_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
-
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ rc = ohci_suspend(hcd, do_wakeup);
+ if (rc)
+ return rc;
s3c2410_stop_hc(pdev);
-bail:
- spin_unlock_irqrestore(&ohci->lock, flags);
return rc;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
